iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 10110-5:1996/Cor 1:1996

(Corrigendum)

Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances — Technical Corrigendum 1

Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances — Technical Corrigendum 1

Replaces the word spherical with the word aspheric in clause 3.10, second line.

Optique et instruments d'optique — Indications sur les dessins pour éléments et systèmes optiques — Partie 5: Tolérances de forme de surface — Rectificatif technique 1

General Information

Status
Withdrawn
Publication Date
31-Jul-1996
Withdrawal Date
31-Jul-1996
ICS
01.100.20 - Mechanical engineering drawings
37.020 - Optical equipment
Technical Committee
ISO/TC 172/SC 1 - Fundamental standards
Drafting Committee
ISO/TC 172/SC 1/WG 2 - Preparation of drawings for optical elements and systems
Current Stage
9599 - Withdrawal of International Standard
Completion Date
30-Jul-2007
Ref Project

Relations

Revised
ISO 10110-5:2007 - Optics and photonics — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances
Effective Date
15-Apr-2008
Corrects
ISO 10110-5:1996 - Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances
Effective Date
06-Jun-2022
Child
ISO 10110-5:1996 - Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances
Effective Date
15-Apr-2008

Buy Standard

ISO 10110-5:1996/Cor 1:1996ISO 10110-5:1996/Cor 1:1996
PreviousNext
Standard
ISO 10110-5:1996/Cor 1:1996
English language
1 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 10110-5:1996/Cor 1:1996ISO 10110-5:1996/Cor 1:1996
PreviousNext
Standard
ISO 10110-5:1996/Cor 1:1996
French language
1 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 10110-5:1996/Cor 1:1996ISO 10110-5:1996/Cor 1:1996
PreviousNext
Standard
ISO 10110-5:1996/Cor 1:1996
French language
1 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL STANDARD IS0 1011 O-51 996
TECHNICAL CORRIGENDUM 1
Published 1996-08-01
INTERNAllONU ORGANUA~ON FOR STANDARDlZATlONo hdwYi+APOaHM OPfAHH3A~HF) n0 C ’TAH~A~~3A~~~. OR~NlSAnON lmRNATlONAl,E DE ~RMALl~TlON
- Preparation of drawings
Optics and optical instruments
for optical elements and systems -
Part 5:
Surface form tolerances
TECHNICAL CORRIGENDUM 1
Indications SW /es dessins pour &&men ts et s ystemes optiques -
Optique et instruments d ’optique -
Par-tie 5: Tokrances de forme de surface
RECTIFICATIF TECHNIQUE I
Technical Corrigendum 1 to International Standard IS0
...

NORME INTERNATIONALE ISO 1011 O-5: 1996
RECTIFICATIF TECHNIQUE 1
Publié 1996-08-01
INTERNATIONAL ORGANIZATION FOR STANDARUZAllON. MWYHAPOAHAJ) OPfAHH3A~HR no CTAHAAPTH3AL&lH. ORGANISATION lNTERNATlONALE DE ~RMALISA’IWN
Indications sur
Optique et instruments d’optique -
les dessins pour éléments et systèmes optiques -
Partie 5:
Tolérances de forme de surface
RECTIFICATIF TECHNIQUE 1
Op tics and op tical instruments - Preparation of drawings for optical elements and systems -
Part 5: Surface form tolerances
TECHNICAL CORRIGENDUM 7
Le Rectificatif technique 1 à la Norme in
...

NORME INTERNATIONALE ISO 1011 O-5: 1996
RECTIFICATIF TECHNIQUE 1
Publié 1996-08-01
INTERNATIONAL ORGANIZATION FOR STANDARUZAllON. MWYHAPOAHAJ) OPfAHH3A~HR no CTAHAAPTH3AL&lH. ORGANISATION lNTERNATlONALE DE ~RMALISA’IWN
Indications sur
Optique et instruments d’optique -
les dessins pour éléments et systèmes optiques -
Partie 5:
Tolérances de forme de surface
RECTIFICATIF TECHNIQUE 1
Op tics and op tical instruments - Preparation of drawings for optical elements and systems -
Part 5: Surface form tolerances
TECHNICAL CORRIGENDUM 7
Le Rectificatif technique 1 à la Norme in
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 10110-16:2023(Main)
Optics and photonics — Preparation of drawings for optical elements and systems — Part 16: Diffractive surfaces

This document provides general methods of describing surfaces adding a diffractive optical function on optical surfaces, such as planes, spheres, aspheres or general optical surfaces, in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. The subject of this document is the presentation, description and dimensioning of diffractive surfaces in technical drawings. This document does not apply to diffractive surfaces with random surface texture, for example stochastic antireflective structures. Also not addressed by this document are all types of 3-dimensionally extended diffractive structures: Bragg gratings, volume holograms (HOE) and acousto-optic modulators. This document does not address the methods to test and qualify the specifications. This document does not address tools and methods for manufacturing diffractive surfaces.

  • Standard
    29 pages
    English language
    sale 15% off
  • Standard
    30 pages
    French language
    sale 15% off
  • Draft
    30 pages
    English language
    sale 15% off
  • Draft
    36 pages
    French language
    sale 15% off
ISO
ISO 10110-12:2019(Main)
Optics and photonics — Preparation of drawings for optical elements and systems — Part 12: Aspheric surfaces

This document specifies rules for presentation of aspheric surfaces and surfaces with low order symmetry such as cylinders and toroids in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. It also specifies sign conventions and coordinate systems. This document does not apply to off-axis aspheric and discontinuous surfaces such as Fresnel surfaces or gratings. NOTE For off-axis aspheric and non-symmetric surfaces, see ISO 10110-19. This document does not specify the method by which conformity with the specifications is tested.

  • Standard
    26 pages
    English language
    sale 15% off
  • Standard
    26 pages
    French language
    sale 15% off
ISO
ISO 10110-8:2019(Main)
Optics and photonics — Preparation of drawings for optical elements and systems — Part 8: Surface texture

This document specifies rules for the indication of the surface texture of optical elements, in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. Surface texture is the characteristic of a surface that can be effectively described with statistical methods. Typically, surface texture is associated with high spatial frequency errors (roughness) and mid-spatial frequency errors (waviness). This document is primarily intended for the specification of polished optics. This document describes a method for characterizing the residual surface that is left after detrending by subtracting the surface form. The control of the surface form specified in ISO 10110-5, ISO 10110-12, and ISO 10110-19 is not specified in this document.

  • Standard
    23 pages
    English language
    sale 15% off
  • Standard
    24 pages
    French language
    sale 15% off
ISO
ISO 10110-1:2019(Main)
Optics and photonics — Preparation of drawings for optical elements and systems — Part 1: General

This document specifies the general layout of drawings and provides examples of indications in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. This document specifies the presentation in drawings of the characteristics, including the tolerances, of optical elements and systems. This document also includes the popular tabular format, formerly presented in ISO 10110‑10. This tabular format, now described in 5.1, is the preferred format for ISO 10110 drawings. Rules for preparation of technical drawings as well as for dimensioning and tolerancing are given in various ISO Standards. These general standards apply to optical elements and systems only if the necessary rules are not given in the various parts of ISO 10110.

  • Standard
    45 pages
    English language
    sale 15% off
  • Standard
    45 pages
    English language
    sale 15% off
  • Standard
    46 pages
    French language
    sale 15% off
ISO
ISO 10110-18:2018(Main)
Optics and photonics — Preparation of drawings for optical elements and systems — Part 18: Stress birefringence, bubbles and inclusions, homogeneity, and striae

This document specifies the indication of tolerances for four categories of imperfections within optical materials — stress birefringence, bubbles and inclusions, homogeneity, and striae — in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. Tolerances are applied either to a finished optical part, a finished system of optical parts, or to the raw material used to manufacture an optical part.

  • Standard
    22 pages
    English language
    sale 15% off
  • Standard
    23 pages
    French language
    sale 15% off
ISO
ISO 10110-14:2018(Main)
Optics and photonics — Preparation of drawings for optical elements and systems — Part 14: Wavefront deformation tolerance

This document specifies rules for the indication of the permissible deformation of a wavefront transmitted through or, in the case of reflective optics, reflected from an optical element or assembly in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. This document is also applicable when using optical systems with general surfaces (ISO 10110-19). The deformation of the wavefront refers to its departure from the desired shape. The tilt of the wavefront with respect to a given reference surface is excluded from this document. There is no requirement that a tolerance for wavefront deformation is indicated.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    13 pages
    French language
    sale 15% off
  • Standard
    13 pages
    French language
    sale 15% off
ISO
ISO 10110-7:2017(Main)
Optics and photonics — Preparation of drawings for optical elements and systems — Part 7: Surface imperfections

ISO 10110 (all parts) specifies the presentation of design and functional requirements for single optical elements and for optical assemblies in technical drawings used for their manufacture and inspection. ISO 10110-7:2017 specifies the indication of the level of acceptability of surface imperfections within a test region on individual optical elements and optical assemblies. These include localized surface imperfections, edge chips and long scratches. The acceptance level for imperfections is specified, taking into account functional effects (affecting image formation or durability of the optical element), as well as cosmetic (appearance) effects. ISO 10110-7:2017 applies to transmitting and reflecting surfaces of finished optical elements, whether or not they are coated, and to optical assemblies. It allows permissible imperfections to be specified according to the area affected by imperfections, or alternatively by the visibility of imperfections, on components or in optical assemblies.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off
ISO
ISO 10110-11:2016(Main)
Optics and photonics — Preparation of drawings for optical elements and systems — Part 11: Non-toleranced data

ISO 10110-11:2016 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. It specifies the permissible deviations and material imperfections when these are not explicitly indicated.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
ISO
ISO 10110-9:2016(Main)
Optics and photonics — Preparation of drawings for optical elements and systems — Part 9: Surface treatment and coating

ISO 10110-9:2016 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. It specifies rules for indicating the treatments and coatings applied to optical surfaces for functional and/or protective purposes.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off
ISO
ISO 10110-19:2015(Main)
Optics and photonics — Preparation of drawings for optical elements and systems — Part 19: General description of surfaces and components

ISO 10110-19:2015 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacture and inspection. ISO 10110-19:2015 provides a general method of describing surfaces and components. This part of ISO 10110 applies to continuous and discontinuous surfaces. It does not apply to diffractive surfaces, Fresnel surfaces, ophthalmic glasses, and micro-optical surfaces. ISO 10110-19:2015 applies to any general surface or component, even including spherical or rotationally symmetric surfaces if it is necessary, i.e. when NURBS, splines, point clouds, etc. are used. ISO 10110-19:2015 does not specify the method by which compliance with the specifications is to be tested.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    13 pages
    French language
    sale 15% off