• sale 15% off
    • Standard
      1 page
      English language
    • sale 15% off
    • Draft
      1 page
      English language

This document specifies rules for presentation of aspheric surfaces and surfaces with low order symmetry such as cylinders and toroids in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. It also specifies sign conventions and coordinate systems. This document does not apply to off-axis aspheric and discontinuous surfaces such as Fresnel surfaces or gratings. NOTE For off-axis aspheric and non-symmetric surfaces, see ISO 10110-19. This document does n...view more

    • sale 15% off
    • Standard
      26 pages
      French language
    • sale 15% off
    • Standard
      26 pages
      English language

This document specifies rules for the indication of the surface texture of optical elements, in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. Surface texture is the characteristic of a surface that can be effectively described with statistical methods. Typically, surface texture is associated with high spatial frequency errors (roughness) and mid-spatial frequency errors (waviness). This document is primarily intended for the specification of poli...view more

    • sale 15% off
    • Standard
      24 pages
      French language
    • sale 15% off
    • Standard
      23 pages
      English language

This document specifies the general layout of drawings and provides examples of indications in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. This document specifies the presentation in drawings of the characteristics, including the tolerances, of optical elements and systems. This document also includes the popular tabular format, formerly presented in ISO 10110‑10. This tabular format, now described in 5.1, is the preferred format for ISO 10110 d...view more

    • sale 15% off
    • Standard
      46 pages
      French language
    • sale 15% off
    • Standard
      45 pages
      English language
    • sale 15% off
    • Standard
      45 pages
      English language

This document gives fundamental explanations to interferometric measurement objects, describes hardware aspects of interferometers and evaluation methods, and gives recommendations for test reports and calibration certificates.

    • sale 15% off
    • Technical report
      64 pages
      French language
    • sale 15% off
    • Technical report
      63 pages
      English language

This document specifies general optical test methods for the measurement of the relative irradiance in the image field. This document is applicable to optical imaging systems in the optical spectral region from λ = 100 nm to λ = 1 μm. Theoretical reflections and the comparison with the calculation apply only to optical systems. This document is applicable to rotationally invariant and rotationally variant systems; anamorphic systems, for example, are included. Telescopic systems are also include...view more

    • sale 15% off
    • Standard
      15 pages
      French language
    • sale 15% off
    • Standard
      14 pages
      English language

This document specifies procedures for determining the spectroscopic forward scattering characteristics of coated and uncoated optical surfaces over a specified wavelength range between 350 nm and 850 nm using a double-beam spectrophotometer with an integrating sphere. This document is also applicable to the forward scattering properties at a single wavelength. This document is applicable to spectroscopic forward scattering measurements with collection angles larger than 2,7 degrees. ISO 13696 p...view more

    • sale 15% off
    • Standard
      20 pages
      French language
    • sale 15% off
    • Standard
      20 pages
      English language

This document specifies the indication of tolerances for four categories of imperfections within optical materials — stress birefringence, bubbles and inclusions, homogeneity, and striae — in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. Tolerances are applied either to a finished optical part, a finished system of optical parts, or to the raw material used to manufacture an optical part.

    • sale 15% off
    • Standard
      23 pages
      French language
    • sale 15% off
    • Standard
      22 pages
      English language

This document specifies rules for the indication of the permissible deformation of a wavefront transmitted through or, in the case of reflective optics, reflected from an optical element or assembly in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. This document is also applicable when using optical systems with general surfaces (ISO 10110-19). The deformation of the wavefront refers to its departure from the desired shape. The tilt of the wavefron...view more

    • sale 15% off
    • Standard
      13 pages
      French language
    • sale 15% off
    • Standard
      12 pages
      English language

ISO 8478:2017 specifies a method for measuring the spectral transmittance of camera lenses. It describes particular conditions for measuring the axial spectral transmittance, over a wavelength range from 350 nm to 700 nm, of camera lenses which are intended to be used mainly for taking pictures of very distant objects. If the spectral transmittance values are used exclusively for the calculation of the ISO colour contribution index (see ISO 6728) throughout ISO 8478:2017, the wavelength range re...view more

    • sale 15% off
    • Standard
      8 pages
      English language

ISO/TR 21477:2017 intends to guide the user to understand the origins, meanings and differences between the two systems of specifying and evaluating surface imperfections in ISO 10110-7 and ISO 14997, specifically the dimensional method and the visibility method, and to provide information on how to use them. Tables are provided to show specifications of roughly equivalent yield loss for imperfections in the two systems.

    • sale 15% off
    • Technical report
      5 pages
      English language

ISO 14997:2017 specifies the physical principles and practical means for the implementation of methods for evaluating surface imperfections. For imperfections specified using the visibility method, two inspection methods are described. The first is visual evaluation of the surface without any comparison standard (IVV). The second is a visibility assessment of a surface imperfection when compared to an artefact of known brightness (ISV). For imperfections specified using the dimensional method, t...view more

    • sale 15% off
    • Standard
      14 pages
      French language
    • sale 15% off
    • Standard
      14 pages
      English language

ISO 10110 (all parts) specifies the presentation of design and functional requirements for single optical elements and for optical assemblies in technical drawings used for their manufacture and inspection. ISO 10110-7:2017 specifies the indication of the level of acceptability of surface imperfections within a test region on individual optical elements and optical assemblies. These include localized surface imperfections, edge chips and long scratches. The acceptance level for imperfections is ...view more

    • sale 15% off
    • Standard
      12 pages
      French language
    • sale 15% off
    • Standard
      12 pages
      English language

ISO 9022-23:2016 specifies the methods relating to the environmental tests of optical instruments including additional assemblies from other fields (e.g. mechanical, chemical, and electronic devices), under equivalent conditions, for their ability to resist the influence of low pressure combined with cold, including the potential condensation and freezing of moisture, ambient temperature, and dry or damp heat. It is applicable to optical instruments including additional assemblies from other fie...view more

    • sale 15% off
    • Standard
      13 pages
      English language

ISO 9022-1:2016 defines terms relating to environmental tests of optical and photonic instruments, including additional assemblies from other fields (e.g. mechanical, chemical and electronic devices), and specifies basic features of testing.

    • sale 15% off
    • Standard
      7 pages
      French language
    • sale 15% off
    • Standard
      7 pages
      English language
    • sale 15% off
    • Standard
      7 pages
      French language

ISO 10110-9:2016 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. It specifies rules for indicating the treatments and coatings applied to optical surfaces for functional and/or protective purposes.

    • sale 15% off
    • Standard
      12 pages
      French language
    • sale 15% off
    • Standard
      9 pages
      English language
    • sale 15% off
    • Standard
      12 pages
      French language
    • sale 15% off
    • Standard
      9 pages
      English language

ISO 10110-11:2016 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. It specifies the permissible deviations and material imperfections when these are not explicitly indicated.

    • sale 15% off
    • Standard
      3 pages
      French language
    • sale 15% off
    • Standard
      3 pages
      English language
    • sale 15% off
    • Standard
      3 pages
      French language
    • sale 15% off
    • Standard
      3 pages
      English language

ISO 9022-9:2016 specifies the methods relating to the environmental tests of optical instruments including additional assemblies from other fields (e.g. mechanical, chemical and electronic devices), under equivalent conditions, for their ability to resist the effects of simulated solar radiation or laboratory weathering, which is a combination of simulated solar radiation, heat, and moisture. It is applicable to instruments that may be exposed to sunlight during operation or unsheltered storage ...view more

    • sale 15% off
    • Standard
      8 pages
      English language

ISO 14999-4:2015 applies to the interpretation of interferometric data relating to the measurement of optical elements. ISO 14999-4:2015 gives definitions of the optical functions and values specified in the preparation of drawings for optical elements and systems, made in accordance with ISO 10110‑5 and/or ISO 10110‑14 for which the corresponding nomenclature, functions, and values are listed in ISO 10110‑5, Annex B. It also provides guidance for their interferometric evaluation by visual analy...view more

    • sale 15% off
    • Standard
      30 pages
      French language
    • sale 15% off
    • Standard
      27 pages
      English language

ISO 10110-6:2015 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. ISO 10110-6:2015 specifies rules for indicating centring tolerances for optical elements, subassemblies, and assemblies. ISO 10110-6:2015 applies to plano surfaces, rotationally invariant surfaces, circular cylindrical, non-circular cylindrical, and non-symmetrical surfaces (general surfaces). General surfaces are describe...view more

    • sale 15% off
    • Standard
      21 pages
      French language
    • sale 15% off
    • Standard
      21 pages
      English language

ISO 10110-19:2015 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacture and inspection. ISO 10110-19:2015 provides a general method of describing surfaces and components. This part of ISO 10110 applies to continuous and discontinuous surfaces. It does not apply to diffractive surfaces, Fresnel surfaces, ophthalmic glasses, and micro-optical surfaces. ISO 10110-19:2015 applies to any general surface or componen...view more

    • sale 15% off
    • Standard
      13 pages
      French language
    • sale 15% off
    • Standard
      12 pages
      English language

ISO 10110-5:2015 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. ISO 10110-5:2015 specifies rules for indicating the tolerance for surface form deviation. NOTE The terminology of interferometry employing the unit "fringe spacings" is widely used for the specification of tolerances. However, the usage of non-interferometric methods for testing of optical parts has recently become more im...view more

    • sale 15% off
    • Standard
      21 pages
      French language
    • sale 15% off
    • Standard
      20 pages
      English language

ISO 10109:2015 contains tables for environmental tests and test parameters which can be used as a guideline for the selection of environmental tests. These include the selection of standardized tests according to ISO 9022 as well as additional parameters not described in ISO 9022 and necessary for the optical or photonic instruments. Ultimately, these tables specify the requirements to be met with regard to the reliability of the optical, mechanical, chemical, and electrical properties or perfor...view more

    • sale 15% off
    • Standard
      16 pages
      English language

ISO 9022-11:2015 specifies the methods relating to the environmental tests of optical instruments, including additional assemblies from other fields (e.g. mechanical, chemical, and electronic devices) under equivalent conditions, for their ability to resist the influence of mould growth. However, complete instruments or assemblies are only tested as specified in ISO 9022-11:2015 in exceptional cases. Normally, representative specimens such as mounted optics, material samples, or surface coatings...view more

    • sale 15% off
    • Standard
      9 pages
      English language

ISO 9022-12:2015 specifies the methods relating to the environmental tests of optical instruments including additional assemblies from other fields (e.g. mechanical, chemical, and electronic devices), under equivalent conditions, for their ability to resist the influence of contamination, i.e. contact with corrosive chemical substances (hereafter called test agents). However, complete instruments or assemblies are only tested as specified in ISO 9022-12:2015 in exceptional cases. Normally, repre...view more

    • sale 15% off
    • Standard
      11 pages
      English language
    • sale 15% off
    • Standard
      11 pages
      English language

ISO 9022-17:2015 specifies the methods relating to the environmental tests of optical instruments and including additional assemblies from other fields (e.g. mechanical, chemical, and electronic devices) under equivalent conditions, for their ability to resist the influence of combined contamination and solar radiation. "Contamination", as used in ISO 9022-17:2015, means the contact of optical instruments with corrosive chemical substances (hereafter called test agents). Complete instruments or ...view more

    • sale 15% off
    • Standard
      5 pages
      English language
    • sale 15% off
    • Standard
      5 pages
      English language

ISO 9022-14:2015 specifies the methods relating to the environmental tests of optical instruments including additional assemblies from other fields (e.g. mechanical, chemical, and electronic devices) under equivalent conditions, for their ability to resist the influence of dew, hoarfrost or ice. The purpose of testing is to investigate to what extent the optical, climatic, mechanical, chemical, and electrical (including electrostatic) performance characteristics of the specimen are affected by d...view more

    • sale 15% off
    • Standard
      6 pages
      English language
    • sale 15% off
    • Standard
      6 pages
      English language

ISO 9022-7:2015 specifies the methods relating to the environmental tests of optical instruments including additional assemblies from other fields (e.g. mechanical, chemical, and electronic devices), under equivalent conditions, for their ability to resist the influence of drip or rain. The purpose of testing is to investigate to what extent the optical, climatic, mechanical, chemical, and electrical (including electrostatic) performance characteristics of the specimen are affected by drip or ra...view more

    • sale 15% off
    • Standard
      11 pages
      English language
    • sale 15% off
    • Standard
      11 pages
      English language

ISO 9022-8:2015 specifies the methods relating to the environmental tests of optical instruments including additional assemblies from other fields (e.g. mechanical, chemical, and electronic devices), under equivalent conditions, for their ability to resist the influence of high pressure, low pressure, or immersion. The purpose of testing is to investigate to what extent the optical, climatic, mechanical, chemical, and electrical performance characteristics of the specimen are affected by high pr...view more

    • sale 15% off
    • Standard
      6 pages
      English language
    • sale 15% off
    • Standard
      6 pages
      English language

ISO 9022-20:2014 specifies the methods relating to the environmental tests of optical instruments including additional assemblies from other fields (e.g. mechanical, chemical, and electronic devices), under equivalent conditions, for their ability to resist the influence of sulfur dioxide (SO2) or hydrogen sulfide (H2S) in a humid atmosphere. The purpose of the testing is to investigate to what extent optical, climatic, mechanical, chemical, and electrical performance characteristics of the spec...view more

    • sale 15% off
    • Standard
      6 pages
      English language
    • sale 15% off
    • Standard
      6 pages
      English language

ISO 9022-6:2015 specifies the methods relating to the environmental tests of optical instruments including additional assemblies from other fields (e.g. mechanical, chemical, and electronic devices), under equivalent conditions, for their ability to resist the influence of blowing dust. The purpose of testing is to investigate to what extent the optical, climatic, mechanical, chemical, and electrical (including electrostatic) performance characteristics of the specimen are affected by blowing du...view more

    • sale 15% off
    • Standard
      4 pages
      English language
    • sale 15% off
    • Standard
      4 pages
      English language

ISO 9022-2:2015 specifies the methods relating to the environmental tests of optical instruments including additional assemblies from other fields (e.g. mechanical, chemical, and electronic devices), under equivalent conditions, for their ability to resist the influence of temperature and/or humidity. The purpose of the testing is to investigate to what extent optical, climatic, mechanical, chemical, and electrical (including electrostatic) performance characteristics of the specimen are affecte...view more

    • sale 15% off
    • Standard
      8 pages
      English language
    • sale 15% off
    • Standard
      8 pages
      English language

ISO 9022-3:2015 specifies the methods relating to the environmental tests of optical instruments including additional assemblies from other fields (e.g. mechanical, chemical, and electronic devices), under equivalent conditions, for their ability to resist the influence of mechanical stress. The purpose of the testing is to investigate to what extent the optical, climatic, mechanical, chemical, and electrical (including electrostatic) performance characteristics of the specimen are affected by m...view more

    • sale 15% off
    • Standard
      7 pages
      English language
    • sale 15% off
    • Standard
      7 pages
      English language

ISO 9022-4:2014 specifies the methods relating to the environmental tests of optical instruments including additional assemblies from other fields (e.g. mechanical, chemical, and electronic devices), under equivalent conditions, for their ability to resist the influence of salt mist. Exposure to salt mist mainly results in the corrosion of metals. Effects might also occur by way of clogging or binding of moving parts. The purpose of the testing is to assess, as early as possible, the ability of ...view more

    • sale 15% off
    • Standard
      9 pages
      English language

ISO/TR 16743:2013 gives terms and definitions and describes techniques for the characterization of wavefronts influenced by optical systems and optical components. It describes basic configurations for a variety of wavefront sensing systems and discusses the usefulness of tests in different situations.

    • sale 15% off
    • Technical report
      27 pages
      English language

ISO 9335:2012 gives general guidance for the construction and use of equipment for measurement of the optical transfer function (OTF) of imaging systems. It specifies important factors that can influence the measurement of the OTF, and gives general rules for equipment performance requirements and environmental controls. It specifies important precautions that should be taken to ensure accurate measurements and correction factors to be applied to the collected data.

    • sale 15% off
    • Standard
      24 pages
      French language
    • sale 15% off
    • Standard
      24 pages
      English language

ISO 9022-22:2012 specifies methods for the testing of optical instruments, including additional assemblies from other fields (e.g. mechanical, chemical and electronic devices) under equivalent conditions, for their ability to resist combined bump or random vibration, in cold, dry heat or temperature change.

    • sale 15% off
    • Standard
      7 pages
      English language

ISO 25297-2:2011 specifies the relationship between the terms used in ISO 25297-1 and the properties defined in ISO 23584-2 and provides the means to facilitate the use of both standards.

    • sale 15% off
    • Standard
      23 pages
      English language

ISO 15529:2010 specifies the principal MTFs associated with a sampled imaging system, together with related terms, and outlines a number of suitable techniques for measuring these MTFs. It also defines a measure for the “aliasing” related to imaging with such systems. ISO 15529:2010 is particularly relevant to electronic imaging devices such as digital still and video cameras and the detector arrays they embody.

    • sale 15% off
    • Standard
      26 pages
      French language
    • sale 15% off
    • Standard
      25 pages
      English language

ISO 9336‑1:2010 specifies a method of testing interchangeable lenses for 35 mm still cameras with a picture format of 24 mm x 36 mm in terms of imaging states aimed at making valid optical transfer function measurements.

    • sale 15% off
    • Standard
      4 pages
      French language
    • sale 15% off
    • Standard
      4 pages
      English language

ISO 517:2008 pertains to apertures and related properties of photographic lenses affecting the illuminance at the centre of the image. ISO 517:2008 specifies aperture markings for all types of lenses used in still cameras, and gives tolerances for the stop numbers. It also defines aperture stop, entrance pupil, focal length, relative aperture and stop numbers, and gives methods for their measurement or determination. ISO 517:2008 applies only to lenses focused on objects at infinity; that is, at...view more

    • sale 15% off
    • Standard
      8 pages
      English language

ISO 9039:2008 specifies methods of determining distortion in optical systems for the purposes of quality evaluation. It applies to optical imaging systems in the optical spectral range from 100 nm to 15 000 nm which, by their design, aim at a rotationally symmetric image geometry. It is applicable to electro-optical imaging systems provided that adequate rotational symmetry of the image is guaranteed. It does not, therefore, apply to anamorphic and fibre optic systems.

    • sale 15% off
    • Standard
      19 pages
      French language
    • sale 15% off
    • Standard
      19 pages
      English language
    • sale 15% off
    • Draft
      22 pages
      French language
    • sale 15% off
    • Draft
      22 pages
      French language
    • sale 15% off
    • Draft
      20 pages
      English language
    • sale 15% off
    • Draft
      21 pages
      English language

ISO/TR 14999-1:2005 gives terms, definitions and fundamental physical and technical relationships for interferometric measurements of optical wavefronts and surface form of optical elements. It explains, why some principles of the construction and use of interferometers are important due to the wave nature of the wavefronts to be measured. Since all wavefronts with the exception of very extended plane waves do alter their shape when propagating, ISO/TR 14999-1:2005 also includes some basic infor...view more

    • sale 15% off
    • Technical report
      42 pages
      English language

ISO/TR 14999-3:2005 discusses sources of error and the separation of errors into symmetric and non-symmetric parts. It also describes the reliance of measurements on the quality of a physical reference surface and the development of test procedures capable of achieving absolute calibration.

    • sale 15% off
    • Technical report
      44 pages
      English language

ISO 10110-17:2004 specifies rules for the indication of the damage threshold from laser irradiation up to which optical surfaces shall not exhibit any damage, as defined in ISO 11254-1, as part of specification of the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection.

    • sale 15% off
    • Standard
      4 pages
      English language
    • sale 15% off
    • Standard
      4 pages
      French language

This International Standard defines terms relating to chromatic aberrations and indicates the mathematical relationships between those terms. It also gives general guidance for the measurement of chromatic aberrations and is valid for optical imaging systems which are constructed to be of rotational symmetric imaging geometry. It is also valid for optoelectronic imaging systems.

    • sale 15% off
    • Standard
      17 pages
      French language
    • sale 15% off
    • Standard
      16 pages
      English language
    • sale 15% off
    • Standard
      30 pages
      English language
    • sale 15% off
    • Standard
      32 pages
      French language