CEN - European Committee for Standardization

This document covers the different types of weaving and knitting machines defined in ISO 5247 (all parts)[2] and ISO 7839[3], respectively.
It is applicable to:
full-width weaving machines with weft insertion by:
shuttles;
rigid, telescopic or flexible rapiers;
projectiles;
hydraulic (waterjet) or by pneumatic (airjet) nozzle;
narrow fabric weaving machines with weft insertion by shuttles or needles;
jacquard machines;
knitting machinery including:
circular knitting;
flat bed kn...view more

This European Standard is applicable to entertainment audio ear-muffs. It specifies requirements on construction, design, performance, marking and user information relating to the inclusion of the entertainment audio facility.

This European Standard is applicable to entertainment audio earplugs. It specifies requirements on construction, design, performance, marking and user information relating to the inclusion of the entertainment audio facility.

1.1   General
NeTEx is dedicated to the exchange of scheduled data (network, timetable and fare information). It is based on Transmodel V5.1 (EN 12986), IFOPT (EN 28701) and SIRI (CEN/TS 15531-4/5 and EN 15531-1/2/3 ) and supports the exchange of information of relevance for passenger information about public transport services and also for running Automated Vehicle Monitoring Systems (AVMS).
NOTE   NeTEx is a refinement and an implementation of Transmodel and IFOPT; the definitions and explanatio...view more

ISO 8637-1:2017 specifies requirements for haemodialysers, haemodiafilters, haemofilters and haemoconcentrators, hereinafter collectively referred to as "the device", for use in humans.
ISO 8637-1:2017 does not apply to:
- extracorporeal blood circuits;
- plasmafilters;
- haemoperfusion devices;
- vascular access devices;
- blood pumps;
- pressure monitors for the extracorporeal blood circuit;
- air detection devices;
- systems to prepare, maintain or monitor dialysis fluid;
- systems ...view more

This technical specification is a profile of CEN/TS 16614 series. It focuses on information relevant to feed passenger information services and excludes operational and fares information.
NeTEx is dedicated to the exchange of scheduled data (network, timetable and fare information) based on Transmodel V6 (EN 12986) and SIRI (CEN/TS 15531-4/5 and EN 15531-1/2/3) and supports information exchange of relevance to public transport services for passenger information and AVMS systems.
As for most da...view more

This document describes laser radiation hazards arising in laser processing machines, as defined in 3.7. It also specifies the safety requirements relating to laser radiation hazards, as well as the information to be supplied by the manufacturers of such equipment (in addition to that prescribed by IEC 60825).
Requirements dealing with noise as a hazard from laser processing machines are included in ISO 11553‑3:2013.
This document is applicable to machines using laser radiation to process mate...view more

This document specifies the characteristics and test methods for flue dampers that are used as components, carrying flue gas, in order to limit the flow in a chimney or to prevent back flow of soot during cleaning of the chimney or to prevent the backflow of the flue gas e.g. in case of multi-served chimneys.
This document covers only flue dampers incorporated in a housing and installed inside a building.
This document covers only flue dampers with sealings made of elastomeric materials for te...view more

This document describes the design, use and calibration of volumetric measures (capacity measures) which are intended for use in fixed locations in a laboratory or in the field. This document gives guidance on both standard and non-standard measures. It also covers portable and mobile measures. This document is applicable to the petroleum industry; however, it may be applied more widely to other applications.
This document excludes measures for cryogenic liquids and pressurized measures as used...view more

This document specifies safety requirements and their verification for design and construction of, i.e. self-propelled, mounted, semi-mounted and trailed, wood chippers used in forestry, agriculture, horticulture and landscaping.
This document applies to chippers, used when stationary, which are manually loaded with wood through a horizontal or near horizontal infeed chute and where the infeed action is performed by the chipping components acting as infeed components or by separate integrated i...view more

This document specifies the mechanical and physical properties of bolts, screws and studs, with coarse pitch thread and fine pitch thread, made of corrosion-resistant stainless steels, when tested at the ambient temperature range of 10 °C to 35 °C. It specifies property classes in relation to austenitic, martensitic, ferritic and duplex (austenitic-ferritic) steel grades for fasteners.
The term "fasteners" is used in this document when bolts, screws and studs are considered all together.
ISO 3...view more

This document gives guidelines to organizations for general principles, policy, strategy and activities relating to both internal and external environmental communication. It uses proven and well-established approaches for communication, adapted to the specific conditions that exist in environmental communication.
It is applicable to all organizations regardless of their size, type, location, structure, activities, products and services, and whether or not they have an environmental management ...view more

This document specifies the requirements and test procedures for 360° visibility of self-propelled industrial order-picking, lateral- and front-stacking trucks with elevating operator position in accordance with ISO 5053-1 (herein after referred to as trucks), without a load and it is intended to be used in conjunction with EN 16842-1.
The visibility of trucks driving in very narrow aisles and/or driving with elevated operator (above 500 mm) is not within the scope of this standard.
Where spec...view more

This document is intended to inform about the potential technical consequences on engine parts and fuel systems when some types of chemical compounds are used as blending components in unleaded petrol. This document is not meant to intentionally limit market fuel development.
The chemical compounds addressed, specifically, in this document are:
-   sec-butyl acetate (SBA) (CAS 105-46-4),
-   aniline (CAS 62-53-3),
-   N-methyl aniline (NMA) (CAS 100-61-8),
-   N-ethyl aniline (NEA) (CAS 103-69-5), ...view more

This document specifies the general requirements for metallic check valves, which are forged, cast or fabricated in straight, angle or oblique pattern (see EN 736‐2) with end connections flanged or wafer, butt welding, socket welding, or threaded.
This document applies to metallic check valves used for all industrial applications.
Additional requirements given in the relevant application standards may apply to check valves used for more specific applications (e.g. for the water industry, the c...view more

This document specifies the information exchanges between various parties' infrastructures that take place in support of DPM applications. It complements standards that address the design, security, applications and readability of Digital Postage Marks.
The following items will be addressed by this document:
-   identification of parties participating in exchanges of information described by this document;
-   identification of functions (interactions, use cases);
-   definition of parties’ respon...view more

The Geography Markup Language (GML) is an XML encoding in accordance with ISO 19118 for the transport and storage of geographic information modelled in accordance with the conceptual modelling framework used in the ISO 19100 series of International Standards and including both the spatial and non-spatial properties of geographic features.
This document defines the XML Schema syntax, mechanisms and conventions that:
— provide an open, vendor-neutral framework for the description of geospatial a...view more

This document describes the reference method used for type testing and in case of dispute for determining the polished stone value (PSV) of a coarse aggregate used in road surfacings. For other purposes, in particular factory production control, other methods are possible provided that an appropriate working relationship with the reference method has been established. Examples of advanced test methods can be found in the Bibliography.
Annex A describes an optional method for the determination o...view more

This TS will focus on the principal aspects of urban ITS where vendor lock-in is a technical and financial problem: primarily centre-tofield communications and traffic management systems. It will cover the following scope:
- Analysis of vendor lock-in challenges, and mitigation and migration options
- Technical options for interworking multiple vendors' products
- Review of principal approaches taken to date to implement these options in comunity frameworks and specifications
- Translation b...view more

This document sets out the general principles for the extended application of test results obtained on fire resisting and smoke control doorsets, e.g. the types of pedestrian and industrial doors, operable fabric curtains and openable windows listed in the Introduction above when tested in accordance with EN 1634-1 and/or EN 1634-3.
This document provides the general principles which are intended to be used in conjunction with the relevant part of EN 15269 depending upon the specific product ty...view more

This document provides the specification for the Additive Manufacturing File Format (AMF), an interchange format to address the current and future needs of additive manufacturing technology.
This document specifies the requirements for the preparation, display and transmission for the AMF. When prepared in a structured electronic format, strict adherence to an extensible markup language (XML)[1] schema supports standards-compliant interoperability.
NOTE A W3C XML schema definition (XSD) for th...view more

This document describes the reference method, the Los Angeles test, used for type testing and in case of dispute (and an alternative method, the impact test) for determining the resistance to fragmentation of coarse aggregates (main text) and aggregates for railway ballast (Annex A). For other purposes, in particular factory production control, other methods are possible provided that an appropriate working relationship with the reference method has been established.
This document applies to na...view more

This document specifies acceptance and periodic reverification tests of CMM performance with contacting probing systems and is only applicable to CMMs using:
— any type of contacting probing system; and
— spherical or hemispherical stylus tip(s).
NOTE CMM probing performance tests are specified by the maximum permissible errors (MPEs), due to the impracticality of isolating the performance of the probing system from that of the CMM, even on a small artefact such as a test sphere.
This docume...view more

This standard provides a comprehensive set of procedures for verifying the correct implementation of each capability claimed on a BACnet PICS including:
(a) support of each claimed BACnet service, either as an initiator, executor, or both,
(b) support of each claimed BACnet object-type, including both required properties and each claimed optional property,
(c) support of the BACnet network layer protocol,
(d) support of each claimed data link option, and
(e) support of all claimed special f...view more

This document specifies a method using microscopy to identify leather and distinguish it from other materials. The method is not applicable for identifying specific leathers (e.g. sheep leather).

This document defines new modes in a reference data model, in order to allow integration of these modes into urban multimodal travel services (e.g. trip planning systems).

This European Standard gives the test methods for mobile waste and recycling containers according to EN 840-1 to EN 840-4. It also gives the levels to be reached during the tests or after they have been done.
This European Standard is applicable to mobile waste and recycling containers with capacities up to 1 700 l.

This document gives the safety requirements and measures for stationary and displaceable circular saw benches (with or without sliding table and/or demountable power feed unit), also known as "table saws" (in the USA), hereinafter referred to as "machines", designed to cut wood and material with similar physical characteristics to wood.
NOTE 1 For the definition of stationary and displaceable machine, see ISO 19085‑1:2017, 3.4 and 3.5.
It deals with all significant hazards, hazardous situation...view more

This European Standard specifies dimensions and design requirements of mobile waste and recycling containers with 4 wheels, with flat lid(s) and capacity up to 1 700 l to be used by wide trunnion or BG-lifting device and/or wide comb lifting device.

This document specifies requirements for enteral feeding systems comprising enteral giving sets, enteral extension sets, enteral syringes, enteral feeding catheters, and enteral accessories.
This document is not applicable to oral syringes.

This document specifies requirements, test methods, marking and information for protective gloves and other hand protective equipment’s against thermal risks for professional use, consumer, domestic use.
This document is also applicable to arm protective equipment.
It is used for all gloves and other hand protective equipment’s which protect the hands or part of the hand against heat and/or fire in one or more of the following forms: flame, contact heat, convective heat, radiant heat, small sp...view more

This European Standard provides the essential safety, health and ergonomic requirements for mobile waste and recycling containers according to EN 840-1 to EN 840-4, not including hazardous wastes containers.

This document specifies a method for the determination of the eradicant action of a surface application of a fast and a slow acting wood preservative product or a deferred acting wood preservative product on solid wood infested with larvae of Hylotrupes bajulus (Linnaeus).
This method is applicable to:
-   organic formulations, as supplied or as prepared in the laboratory by dilution of concentrates; or
-   organic water-dispersible formulations, as supplied or as prepared in the laboratory by di...view more

ISO 17178:2013 specifies test methods for adhesives for bonding parquet and similar wood floorings to a subfloor. It also specifies the minimum requirements for shear strength, tensile strength to be achieved with these adhesives.
ISO 17178:2013 does not refer to the selection and installation of parquet floorings.

This European Standard specifies dimensions and design requirements of mobile waste and recycling containers with 4 wheels, with dome lid(s) and capacity up to 1 300 l to be used by trunnion and/or comb lifting device.

This document gives machine manufacturers guidance on potential security aspects in relation to safety of machinery when putting a machine into service or placing on the market for the first time. It provides essential information to identify and address IT-security threats which can influence safety of machinery.
This document gives guidance but does not provide detailed specifications on how to address IT-security aspects which can influence safety of machinery.
This document does not addres...view more

The test methods described are designed to determine the disinfectant activity of processes used in the 1) medical area, 2) veterinary area, 3) food, industrial, domestic and institutional area using automated processes for distributing chemicals by air diffusion with no operator manually applying the disinfectant. This document covers the disinfection of nonporous surfaces but not that of the air.
The objective of the described processes is to disinfect the surfaces of the overall area includi...view more

This document applies for the planning, design, installation and commissioning of ventilation systems in laboratories. It also applies for scientific classrooms in schools when equipped with a ventilation system.
The application of this document depends not on the term laboratory in its narrower sense but this document also applies also for laboratory-related rooms in which work with dangerous or health hazardous substances is performed.

This document specifies the requirements and test methods for access components comprising a frame and a door or doors which provide access to the flue of a chimney for the purpose of inspection or cleaning.
Access components for higher nominal working temperature than 450 °C, positive pressure and wet applications are not covered by this standard.
The document is limited to access components with door opening dimensions with a maximum width of 450 mm and a maximum height of 600 mm.
Products ...view more

This document specifies crashworthiness requirements applicable to new designs of:
- locomotives;
- driving vehicles operating in passenger and freight trains;
- passenger rail vehicles operating in passenger trains (such as trams, metros, mainline trains).
This document identifies common methods of providing passive safety that can be adapted to suit individual vehicle requirements.
This document specifies the characteristics of reference obstacle models for use with the design collision s...view more

This European Standard specifies dimensions and design requirements of mobile waste containers with 4 wheels, with flat lid(s) and capacity up to 1 300 l to be used by trunnion and/or comb lifting device.

This document is applicable to playground equipment, surfacing and ancillary items, eg., gates, fences, benches, bins, shades, etc.
Note 1 The scope of the inspection and inclusion of the ancillary items will vary from country to country
Note 2 Ancillary items are not included in EN 1176 and are not assessed for compliance with EN 1176.
This document establishes requirements on the installation, inspection, maintenance and operation of playground equipment and surfacing around the equipment. ...view more

This document specifies performance requirements and test methods for the evaluation of procedures for measuring metals and metalloids in airborne particles sampled onto a suitable collection substrate.
This document specifies a method for estimating the uncertainties associated with random and systematic errors and combining them to calculate the expanded uncertainty of the measuring procedure as a whole, as prescribed in ISO 20581.
This document is applicable to measuring procedures in which...view more

This document specifies a test method for the determination of tanning agents through filtration of all vegetable and synthetic tanning products.

This part of EN 71 specifies requirements for the substances and materials used in finger paints and applies to finger paints only.
Additional requirements are specified for markings, labelling and containers.

This document gives the safety requirements and measures for stationary and displaceable combined woodworking machines, having at least two separately usable working units and with manual loading and unloading of the workpiece, hereinafter referred to as "machines". The integrated working units can be of these types only:
— a sawing unit;
— a moulding unit;
— a planing unit.
The machines are designed to cut solid wood and material with similar physical characteristics to wood.
NOTE 1 For th...view more