This document establishes rules for the simplified representation of threaded parts, with the exception of screw thread inserts, which are covered in ISO 6410-2. This representation is applicable when it is not necessary to show the exact shape and details of the parts (see ISO 6410-1), for example in assembly drawings.

    • sale 15% off
    • Standard
      4 pages
      English language
    • sale 15% off
    • Standard
      4 pages
      French language
    • sale 15% off
    • Draft
      4 pages
      English language
    • sale 15% off
    • Draft
      4 pages
      French language

This document establishes rules and conventions for particular use with technical drawings on glassware, for example, laboratory glassware or glassware used in other technical fields.
Optical parts are not, however, included herein.

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day

This document specifies rules for presentation of aspheric surfaces and surfaces with low order symmetry such as cylinders and toroids in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. It also specifies sign conventions and coordinate systems. This document does not apply to off-axis aspheric and discontinuous surfaces such as Fresnel surfaces or gratings. NOTE For off-axis aspheric and non-symmetric surfaces, see ISO 10110-19. This document does n...view more

    • sale 15% off
    • Standard
      26 pages
      English language
    • sale 15% off
    • Standard
      26 pages
      French language

This document specifies rules for the indication of the surface texture of optical elements, in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. Surface texture is the characteristic of a surface that can be effectively described with statistical methods. Typically, surface texture is associated with high spatial frequency errors (roughness) and mid-spatial frequency errors (waviness). This document is primarily intended for the specification of poli...view more

    • sale 15% off
    • Standard
      23 pages
      English language
    • sale 15% off
    • Standard
      24 pages
      French language

This document specifies the general layout of drawings and provides examples of indications in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. This document specifies the presentation in drawings of the characteristics, including the tolerances, of optical elements and systems. This document also includes the popular tabular format, formerly presented in ISO 10110‑10. This tabular format, now described in 5.1, is the preferred format for ISO 10110 d...view more

    • sale 15% off
    • Standard
      45 pages
      English language
    • sale 15% off
    • Standard
      45 pages
      English language
    • sale 15% off
    • Standard
      46 pages
      French language

ISO 13715:2017 specifies rules for the indication and dimensioning of undefined edges in technical product and dimensions. The proportions and dimensions of the graphical symbols to be used are also specified.
In cases where the geometrically defined shape of an edge (for example, 1 × 45°) is required, the general dimensioning principles given in ISO 129‑1 apply.

    • sale 10% off
    • Standard
      30 pages
      English language
    • e-Library read for
      1 day

ISO 18388:2016 specifies a series of relief grooves for shafts and holes, intended for general use in mechanical engineering.
It also intends to avoid unnecessary multiplicity of tools by a restricted selection of groove-types and dimensional versions.
NOTE The shape and the dimensions of the relief grooves type G and H correspond with the "Indexable hard material inserts" according to ISO 6987.

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day

This document defines the rules to be applied for symbolic representation of welded joints on technical
drawings. This can include information about the geometry, manufacture, quality and testing of the
welds. The principles of this document can also be applied to soldered and brazed joints.
It is recognized that there are two different approaches in the global market to designate the arrow side
and other side on drawings. In this document:
— clauses, tables and figures which carry the suff...
view more

    • sale 10% off
    • Standard
      64 pages
      English language
    • e-Library read for
      1 day

This document defines the rules to be applied for symbolic representation of welded joints on technical drawings. This can include information about the geometry, manufacture, quality and testing of the welds. The principles of this document can also be applied to soldered and brazed joints.
It is recognized that there are two different approaches in the global market to designate the arrow side and other side on drawings. In this document:
— clauses, tables and figures which carry the suffix ...
view more

    • sale 10% off
    • Standard
      64 pages
      English language
    • e-Library read for
      1 day

This document defines the rules to be applied for symbolic representation of welded joints on technical drawings. This can include information about the geometry, manufacture, quality and testing of the welds. The principles of this document can also be applied to soldered and brazed joints. It is recognized that there are two different approaches in the global market to designate the arrow side and other side on drawings. In this document: — clauses, tables and figures which carry the suffix le...view more

    • sale 15% off
    • Standard
      55 pages
      English language
    • sale 15% off
    • Standard
      58 pages
      French language

This document specifies the indication of tolerances for four categories of imperfections within optical materials — stress birefringence, bubbles and inclusions, homogeneity, and striae — in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. Tolerances are applied either to a finished optical part, a finished system of optical parts, or to the raw material used to manufacture an optical part.

    • sale 15% off
    • Standard
      22 pages
      English language
    • sale 15% off
    • Standard
      23 pages
      French language

This document specifies the rules and graphical symbols for the representations of splines and
serrations in technical product documentation.
Two methods of representation are specified:
a) complete representation;
b) simplified representation.
The rules and graphical symbols specified in this document are applicable to detail drawings of parts
(shafts and hubs) and to assembly drawings of joints.
NOTE For uniformity, all the figures in this document have been drawn in the first-angle ort...
view more

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This document specifies rules for the indication of the permissible deformation of a wavefront transmitted through or, in the case of reflective optics, reflected from an optical element or assembly in the ISO 10110 series, which standardizes drawing indications for optical elements and systems. This document is also applicable when using optical systems with general surfaces (ISO 10110-19). The deformation of the wavefront refers to its departure from the desired shape. The tilt of the wavefron...view more

    • sale 15% off
    • Standard
      12 pages
      English language
    • sale 15% off
    • Standard
      13 pages
      French language

This document specifies the rules and graphical symbols for the representations of splines and serrations in technical product documentation.
Two methods of representation are specified:
a) complete representation;
b) simplified representation.
The rules and graphical symbols specified in this document are applicable to detail drawings of parts (shafts and hubs) and to assembly drawings of joints.
NOTE For uniformity, all the figures in this document have been drawn in the first-angle ortho...
view more

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This document specifies the rules and graphical symbols for the representations of splines and serrations in technical product documentation. Two methods of representation are specified: a) complete representation; b) simplified representation. The rules and graphical symbols specified in this document are applicable to detail drawings of parts (shafts and hubs) and to assembly drawings of joints. NOTE For uniformity, all the figures in this document have been drawn in the first-angle orthograph...view more

    • sale 15% off
    • Standard
      10 pages
      English language
    • sale 15% off
    • Standard
      10 pages
      French language

This document establishes complementary rules to ISO 1101 to be applied to pattern specifications and defines rules to combine individual specifications, for geometrical specifications e.g. using the symbols POSITION, SYMMETRY, LINE PROFILE and SURFACE PROFILE, as well as STRAIGHTNESS (in the case where the toleranced features are nominally coaxial) and FLATNESS (in the case where the toleranced features are nominally coplanar) as listed in Annex C.
These rules apply when a set of tolerance zon...
view more

    • sale 10% off
    • Standard
      52 pages
      English language
    • e-Library read for
      1 day

This document specifies simplified representations used in technical drawings for terminal features of
ventilation and drains in pipeline systems.

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

This document specifies supplementary rules, in addition to the general rules given in ISO 6412-1,
applicable to isometric representation. Isometric representation is used where it is necessary to show
the essential features clearly in three dimensions.

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

This document specifies rules and conventions for the execution of simplified drawings for the
representation of all kinds of pipes and pipelines made of all sorts of materials (rigid and flexible).
It is used whenever it is necessary to represent pipes or pipelines in a simplified manner.
For the purposes of this document, the figures illustrate the text only and should not be considered as
design examples.
NOTE This document can also be used for the representation of similar installations...
view more

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day

ISO 6412-2:2017 specifies supplementary rules, in addition to the general rules given in ISO 6412-1, applicable to isometric representation. Isometric representation is used where it is necessary to show the essential features clearly in three dimensions.

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

ISO 6412-1:2017 specifies rules and conventions for the execution of simplified drawings for the representation of all kinds of pipes and pipelines made of all sorts of materials (rigid and flexible).
ISO 6412-1:2017 is used whenever it is necessary to represent pipes or pipelines in a simplified manner.
For the purposes of this document, the figures illustrate the text only and should not be considered as design examples.
NOTE This document can also be used for the representation of similar ...
view more

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day

ISO 6412-3:2017 specifies simplified representations used in technical drawings for terminal features of ventilation and drains in pipeline systems.

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

ISO 10110 (all parts) specifies the presentation of design and functional requirements for single optical elements and for optical assemblies in technical drawings used for their manufacture and inspection. ISO 10110-7:2017 specifies the indication of the level of acceptability of surface imperfections within a test region on individual optical elements and optical assemblies. These include localized surface imperfections, edge chips and long scratches. The acceptance level for imperfections is ...view more

    • sale 15% off
    • Standard
      12 pages
      English language
    • sale 15% off
    • Standard
      12 pages
      French language

ISO 13715:2017 specifies rules for the indication and dimensioning of undefined edges in technical product and dimensions. The proportions and dimensions of the graphical symbols to be used are also specified. In cases where the geometrically defined shape of an edge (for example, 1 × 45°) is required, the general dimensioning principles given in ISO 129‑1 apply.

    • sale 15% off
    • Standard
      22 pages
      English language
    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      22 pages
      French language

SIST EN ISO 1101 defines the symbol language for geometrical specification of workpieces and the rules for its interpretation. It provides the foundation for geometrical specification. The illustrations in this document are intended to illustrate how a specification can be fully indicated with visible annotation (including e.g. TEDs).

    • sale 10% off
    • Standard
      156 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      153 pages
      German language
    • e-Library read for
      1 day

ISO 1101:2017 defines the symbol language for geometrical specification of workpieces and the rules for its interpretation.
It provides the foundation for geometrical specification.
The illustrations in this document are intended to illustrate how a specification can be fully indicated with visible annotation (including e.g. TEDs).
NOTE 1 Other International Standards referenced in Clause 2 and in Tables 3 and 4 provide more detailed information on geometrical tolerancing.
NOTE 2 This docume...
view more

    • sale 10% off
    • Standard
      156 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      153 pages
      German language
    • e-Library read for
      1 day

ISO 1660:2017 gives the rules for geometrical specifications of integral and derived features, using the line profile and surface profile characteristic symbols as defined in ISO 1101.

    • sale 15% off
    • Standard
      45 pages
      English language
    • sale 15% off
    • Standard
      46 pages
      French language

ISO 1101:2017 defines the symbol language for geometrical specification of workpieces and the rules for its interpretation. It provides the foundation for geometrical specification. The illustrations in this document are intended to illustrate how a specification can be fully indicated with visible annotation (including e.g. TEDs). NOTE 1 Other International Standards referenced in Clause 2 and in Tables 3 and 4 provide more detailed information on geometrical tolerancing. NOTE 2 This document g...view more

    • sale 15% off
    • Standard
      145 pages
      English language
    • sale 15% off
    • Standard
      149 pages
      French language

ISO 15787:2016 specifies the manner of presenting and indicating the final condition of heat‐treated ferrous parts in technical drawings.

    • sale 15% off
    • Standard
      33 pages
      English language
    • sale 15% off
    • Standard
      33 pages
      English language
    • sale 15% off
    • Standard
      34 pages
      French language
    • sale 15% off
    • Standard
      34 pages
      French language

ISO 10110-11:2016 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. It specifies the permissible deviations and material imperfections when these are not explicitly indicated.

    • sale 15% off
    • Standard
      3 pages
      English language
    • sale 15% off
    • Standard
      3 pages
      English language
    • sale 15% off
    • Standard
      3 pages
      French language
    • sale 15% off
    • Standard
      3 pages
      French language

ISO 10110-9:2016 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. It specifies rules for indicating the treatments and coatings applied to optical surfaces for functional and/or protective purposes.

    • sale 15% off
    • Standard
      9 pages
      English language
    • sale 15% off
    • Standard
      9 pages
      English language
    • sale 15% off
    • Standard
      12 pages
      French language
    • sale 15% off
    • Standard
      12 pages
      French language

This International Standard specifies graphical indication applicable to a cone (right-angle circular
cones) to define its dimensioning or to specify its tolerancing.
For the purposes of this International Standard, the term “cone” relates to right-angle circular cones
only (any intersection by a plane perpendicular to the axis of the nominal cone is a circle).
NOTE 1 For simplicity, only truncated cones have been represented in this International Standard. However,
this International Stand...
view more

    • sale 10% off
    • Standard
      32 pages
      English language
    • e-Library read for
      1 day

ISO 3040:2016 specifies graphical indication applicable to a cone (right-angle circular cones) to define its dimensioning or to specify its tolerancing.
For the purposes of this International Standard, the term "cone" relates to right-angle circular cones only (any intersection by a plane perpendicular to the axis of the nominal cone is a circle).
NOTE 1 For simplicity, only truncated cones have been represented in this International Standard. However, this International Standard can be applie...
view more

    • sale 10% off
    • Standard
      32 pages
      English language
    • e-Library read for
      1 day

ISO 3040:2016 specifies graphical indication applicable to a cone (right-angle circular cones) to define its dimensioning or to specify its tolerancing. For the purposes of this International Standard, the term "cone" relates to right-angle circular cones only (any intersection by a plane perpendicular to the axis of the nominal cone is a circle). NOTE 1 For simplicity, only truncated cones have been represented in this International Standard. However, this International Standard can be applied ...view more

    • sale 15% off
    • Standard
      24 pages
      English language
    • sale 15% off
    • Standard
      26 pages
      French language

ISO 18388:2016 specifies a series of relief grooves for shafts and holes, intended for general use in mechanical engineering. It also intends to avoid unnecessary multiplicity of tools by a restricted selection of groove-types and dimensional versions. NOTE The shape and the dimensions of the relief grooves type G and H correspond with the "Indexable hard material inserts" according to ISO 6987.

    • sale 15% off
    • Standard
      8 pages
      English language
    • sale 15% off
    • Standard
      9 pages
      French language

ISO 10110-19:2015 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacture and inspection. ISO 10110-19:2015 provides a general method of describing surfaces and components. This part of ISO 10110 applies to continuous and discontinuous surfaces. It does not apply to diffractive surfaces, Fresnel surfaces, ophthalmic glasses, and micro-optical surfaces. ISO 10110-19:2015 applies to any general surface or componen...view more

    • sale 15% off
    • Standard
      12 pages
      English language
    • sale 15% off
    • Standard
      13 pages
      French language

ISO 10110-6:2015 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. ISO 10110-6:2015 specifies rules for indicating centring tolerances for optical elements, subassemblies, and assemblies. ISO 10110-6:2015 applies to plano surfaces, rotationally invariant surfaces, circular cylindrical, non-circular cylindrical, and non-symmetrical surfaces (general surfaces). General surfaces are describe...view more

    • sale 15% off
    • Standard
      21 pages
      English language
    • sale 15% off
    • Standard
      21 pages
      French language

ISO 10110-5:2015 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection. ISO 10110-5:2015 specifies rules for indicating the tolerance for surface form deviation. NOTE The terminology of interferometry employing the unit "fringe spacings" is widely used for the specification of tolerances. However, the usage of non-interferometric methods for testing of optical parts has recently become more im...view more

    • sale 15% off
    • Standard
      20 pages
      English language
    • sale 15% off
    • Standard
      21 pages
      French language

This International Standard defines the maximum material requirement, the least material requirement
and the reciprocity requirement. These requirements can only be applied to features of size.
These requirements are used to control specific functions of workpieces where size and geometry are
interdependent, e.g. to fulfil the functions “assembly of parts” (for maximum material requirement)
or “minimum wall thickness” (for least material requirement). However, the maximum material
requireme...
view more

    • sale 10% off
    • Standard
      54 pages
      English language
    • e-Library read for
      1 day

ISO 17599:2015 specifies the requirements for the classification, composition, modelling, review, application, and management of digital mock-up. This International Standard for mechanical products is applicable to the building, management, review, and application of digital mock-up.

    • sale 15% off
    • Standard
      25 pages
      English language

ISO 2692:2014 defines the maximum material requirement, the least material requirement and the reciprocity requirement. These requirements can only be applied to features of size.
These requirements are used to control specific functions of workpieces where size and geometry are interdependent, e.g. to fulfil the functions "assembly of parts" (for maximum material requirement) or "minimum wall thickness" (for least material requirement). However, the maximum material requirement and least mater...
view more

    • sale 10% off
    • Standard
      54 pages
      English language
    • e-Library read for
      1 day

ISO 2692:2014 defines the maximum material requirement, the least material requirement and the reciprocity requirement. These requirements can only be applied to features of size. These requirements are used to control specific functions of workpieces where size and geometry are interdependent, e.g. to fulfil the functions "assembly of parts" (for maximum material requirement) or "minimum wall thickness" (for least material requirement). However, the maximum material requirement and least materi...view more

    • sale 15% off
    • Standard
      46 pages
      English language
    • sale 15% off
    • Standard
      50 pages
      French language

This International Standard gives rules for dimensioning and tolerancing non-rigid parts where restraining of features is required during verification of dimensions and tolerances specified on a drawing.

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

ISO 10579:2010 gives rules for dimensioning and tolerancing non-rigid parts where restraining of features is required during verification of dimensions and tolerances specified on a drawing.

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

ISO 128-15:2013 specifies the presentation of shipbuilding drawings for general use on metal hulls.

    • sale 15% off
    • Standard
      12 pages
      English language

ISO 16249:2013 specifies specifies general principles for the creation of symbols of physical quantities, coefficients, and parameters for metal springs. It specifies the presentation of basic characters, subscripts, and application symbols for use in the field of helical compression springs, helical extension springs, helical torsion springs, flat springs, and leaf springs with attention to technical product documentation, especially for describing and ordering.

    • sale 15% off
    • Standard
      21 pages
      English language

ISO 13444:2012 specifies a series of knurling dimensions intended for general use in mechanical engineering and is intended to avoid an unnecessary multiplicity of tools by restricting the profile angle to 90° and by restricting the selection of diametral pitches.

    • sale 15% off
    • Standard
      8 pages
      English language
    • sale 15% off
    • Standard
      8 pages
      French language

This International Standard specifies fundamental concepts, principles and rules valid for the creation, interpretation and application of all other International Standards, Technical Specifications and Technical Reports concerning dimensional and geometrical product specifications (GPS) and verification. This International Standard applies to the interpretation of GPS indications on all types of drawings. For the purposes of this International Standard, the term “drawing” is to be interpreted i...view more

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      16 pages
      German language
    • e-Library read for
      1 day

ISO 5459:2011 specifies terminology, rules and methodology for the indication and understanding of datums and datum systems in technical product documentation. It also provides explanations to assist the user in understanding the concepts involved.
ISO 5459:2011 defines the specification operator (see ISO 17450-2) used to establish a datum or datum system. The verification operator (see ISO 17450-2) can take different forms (physically or mathematically) and is not the subject of ISO 5459:2011....
view more

    • sale 10% off
    • Standard
      89 pages
      English language
    • e-Library read for
      1 day

ISO 5459:2011 specifies terminology, rules and methodology for the indication and understanding of datums and datum systems in technical product documentation. It also provides explanations to assist the user in understanding the concepts involved. ISO 5459:2011 defines the specification operator (see ISO 17450-2) used to establish a datum or datum system. The verification operator (see ISO 17450-2) can take different forms (physically or mathematically) and is not the subject of ISO 5459:2011. ...view more

    • sale 15% off
    • Standard
      81 pages
      English language
    • sale 15% off
    • Standard
      82 pages
      French language