IEC PAS 63343:2021 specifies technical requirements, methods of test and required test results for equipment implementing ASM part of the VHF Data exchange system (VDES) as defined in ITU-R M.2092.

    • sale 15% off
    • Technical specification
      73 pages
      English language

IEC TR 63226:2021 is intended for use as guidance for reducing fire risks in general and for site-specific needs for buildings with PV systems. In addition to the general recommendations, technical, installation, and maintenance measures can be selected to reach the intended safety level of the PV system and building, depending on the results of a risk assessment. This document contains general information about building related risks and includes measures for reducing those risks. These measure...view more

    • sale 15% off
    • Technical report
      27 pages
      English language

IEC 60794-1-211:2021 defines test procedures to measure the shrinkage of the sheath due to thermal exposure of cables. A first test method, F11A, is included for cables where the fibre or buffered fibre and the sheath of the cable are intended to be fully terminated into a connector at one or both cable ends. A second test method, F11B, is included in this document for sheath shrinkage testing for general purpose. See IEC 60794-1-2 for a reference guide to test methods of all types and for gener...view more

    • sale 15% off
    • Standard
      25 pages
      English and French language

IEC TR 62959:2021 which is a Technical Report, provides information on cable shrinkage characterisation of optical fibre cables that consist of standard glass optical fibres for telecommunication application. The characterisation is directed to the effects of cable shrinkage or cable element shrinkage on the termination of cables. Shrinkage can or cannot be a concern depending on the method of termination. Examples of different cable termination cases are included and described. Tests for the ev...view more

    • sale 15% off
    • Technical report
      75 pages
      English language

IEC 62680-1-3:2021 defines the USB Type-C™ receptacles, plug and cables.
The USB Type-C Cable and Connector Specification defines a new receptacle, plug, cable and detection mechanisms that are compatible with existing USB interface electrical and functional specifications. This specification covers the following aspects that are needed to produce and use this new USB cable/connector solution in newer platforms and devices, and that interoperate with existing platforms and devices:
- USB Type-...
view more

    • sale 15% off
    • Standard
      792 pages
      English and French language

IEC 60584-3:2021 It is necessary for thermocouple temperature measurement that the electro-motive force (abbreviated as e.m.f. hereafter) of the thermocouple circuit is precisely measured by a measuring instrument. A thermocouple is electrically connected to the instrument by a proper pair of electric cables. IEC 60584-3:2021 standardizes these cables. It specifies identification and manufacturing tolerances for extension and compensating cables (mineral insulated extension and compensating cabl...view more

    • sale 15% off
    • Standard
      23 pages
      English and French language

IEC 61784-3:2021 explains some common principles that can be used in the transmission of safety-relevant messages among participants within a distributed network which use fieldbus technology in accordance with the requirements of IEC 61508 (all parts) for functional safety. These principles are based on the black channel approach. They can be used in various industrial applications such as process control, manufacturing automation and machinery.

    • sale 15% off
    • Standard
      210 pages
      English and French language

IEC 61924-2:2021 is available as IEC 61924-2:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61924-2:2021 specifies the minimum requirements for the design, manufacture, integration, methods of testing and required test results for an integrated navigation system (INS) to comply with the International Maritime Organization (IMO) requirements of Resolution MSC.252(83), as amended by Resol...view more

    • sale 15% off
    • Standard
      214 pages
      English and French language

IEC 61300-2-14:2021 is available as IEC 61300-2-14:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61300-2-14:2021 describes a procedure for determining the suitability of a fibre optic interconnecting device or a passive component to withstand exposure to the optical power which occurs during its operation. This fourth edition cancels and replaces the third edition published in 2012. Th...view more

    • sale 15% off
    • Standard
      33 pages
      English and French language

IEC 60793-1-34:2021 is available as IEC 60793-1-34:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60793-1-34:2021 establishes uniform requirements for the mechanical characteristic: fibre curl or latent curvature in uncoated optical fibres, i.e. a specified length of the fibre has been stripped from coating. Fibre curl has been identified as an important parameter for minimizing the spl...view more

    • sale 15% off
    • Standard
      36 pages
      English and French language

IEC 60502-1:2021 is available as IEC 60502-1:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60502-1:2021 specifies the construction, dimensions and test requirements of power cables with extruded solid insulation for rated AC voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV) for fixed installations such as distribution networks or industrial installations. Cables of rated AC voltage...view more

    • sale 15% off
    • Standard
      55 pages
      English language

IEC 60194-1:2021 covers terms and definitions closely related with TC91 technology.
This document, together with IEC 60194-2:2017, cancel and replace IEC 60194:2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
1) exclusion of 32 general terms better served by other TCs;
2) exclusion of 47 terms no longer used by the electronic assembly industry;
3) inclusion of 14 new terms related with...
view more

    • sale 15% off
    • Standard
      403 pages
      English and French language

IEC 61215-1-2:2021 is available as IEC 61215-1-2:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61215-1-2:2021 lays down requirements for the design qualification of terrestrial photovoltaic modules suitable for long-term operation in open-air climates. The useful service life of modules so qualified will depend on their design, their environment and the conditions under which they ...
view more

    • sale 15% off
    • Standard
      22 pages
      English and French language

IEC 62769-4:2021 is available as IEC 62769-4:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62769-4:2021 specifies the FDI Packages. The overall FDI architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in Figure 1.

    • sale 15% off
    • Standard
      165 pages
      English and French language

IEC 62769-6:2021 is available as IEC 62769-6:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62769-6:2021 specifies the technology mapping for the concepts described in the Field Device Integration (FDI) standard. The technology mapping focuses on implementation regarding the components FDI Client and User Interface Plug-in (UIP) that are specific only to the WORKSTATION platform/.NE...
view more

    • sale 15% off
    • Standard
      52 pages
      English and French language

IEC 62769-3:2021 is available as IEC 62769-3:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62769-3:2021 specifies the FDI Server. The overall FDI architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in this figure.

    • sale 15% off
    • Standard
      121 pages
      English and French language

IEC 62769-7:2021 is available as IEC 62769-7:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62769-7:2021 specifies the elements implementing communication capabilities called Communication Devices (IEC 62769-5).
The overall FDI architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in this illustration....
view more

    • sale 15% off
    • Standard
      126 pages
      English and French language

IEC 60669-2-1:2021 applies to electronic control devices, a general term to cover electronic switches, home and building electronic systems (HBES) / building automation and control systems (BACS) switches and electronic extension units.
It applies to electronic switches and to HBES/BACS switches, for alternating current (AC) only with a rated switching voltage not exceeding 250 V and a rated current not exceeding 16 A, intended for household and similar fixed electrical installations, either in...
view more

    • sale 15% off
    • Standard
      280 pages
      English and French language

IEC 62769-5:2021 is available as IEC 62769-5:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62769-5:2021 defines the FDI Information Model. One of the main tasks of the Information Model is to reflect the topology of the automation system. Therefore, it represents the devices of the automation system as well as the connecting communication networks including their properties, relati...
view more

    • sale 15% off
    • Standard
      126 pages
      English and French language

IEC 62769-2:2021 is available as IEC 62769-2:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62769-2:2021 specifies the FDI Client. The overall FDI architecture is illustrated in Figure 1. The architectural components that are within the scope of this document have been highlighted in this figure.

    • sale 15% off
    • Standard
      308 pages
      English and French language

IEC 62769-1:2021 is available as IEC 62769-1:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62769-1:2021 describes the concepts and overview of the Field Device Integration (FDI) specifications. The detailed motivation for the creation of this technology is also described (see 4.1). Reading this document is helpful to understand the other parts of this multi-part standard.

    • sale 15% off
    • Standard
      62 pages
      English and French language

IEC TS 62862-2-1:2021 defines the requirements and the test methods for the characterization of thermal energy storage (TES) systems. This document contains the information necessary for determining the performance and functional characteristics of active direct and indirect thermal energy storage systems based on sensible heat in solar thermal power plants using parabolic-trough collector, Fresnel collector or tower central receiver technology with liquid storage media.
This document includes ...
view more

    • sale 15% off
    • Technical specification
      48 pages
      English language

IEC TS 63156:2021 describes the procedure for evaluating the energy conversion performance of stand-alone or grid-connected power conversion equipment (PCE) used in PV systems. This procedure includes the calculation of inverter performance to anticipate the energy yield of PV systems. This evaluation method is based on standard power efficiency calculation procedures for PCE found in IEC 61683 and IEC 62891, but provides additional methods for evaluating the expected overall energy efficiency f...view more

    • sale 15% off
    • Technical specification
      23 pages
      English language

IEC 61188-6-2:2021 describes the requirements of design and use for soldering surfaces of land pattern on circuit boards. This document includes land pattern for surface mounted components. These requirements are based on the solder joint requirements of IEC 61191‑2:2017.

    • sale 15% off
    • Standard
      49 pages
      English and French language

IEC TR 63335:2021 identifies a number of issues of particular importance to light water Small Modular Reactors (SMRs), which are not currently adequately addressed by existing IEC SC 45A standards, and that could be considered when revising existing publications or that could be the object of new work item proposals. Whether each of these issues will indeed be addressed, and if so in which publication, will be the decision of each SC 45A working group. Though there are a number of advanced Gener...view more

    • sale 15% off
    • Technical report
      28 pages
      English language

IEC 62769-150-1:2021 specifies an FDI profile for IEC 62734 (ISA100 WIRELESS)

    • sale 15% off
    • Standard
      57 pages
      English and French language

IEC 60987:2021 provides requirements and recommendations for the hardware aspects of I&C systems whatever the technology and applies for all safety classes in a graded manner (as defined by IEC 61513). The requirements defined within this document guide, in particular, the selection of pre-existing components, hardware aspects of system detailed design and implementation and equipment manufacturing.
This third edition cancels and replaces the second edition published in 2007. This edition inclu...
view more

    • sale 15% off
    • Standard
      101 pages
      English and French language

IEC 61189-5-601:2021 specifies the reflow soldering ability test method for components mounted on organic rigid printed boards, the reflow heat resistance test method for organic rigid printed boards, and the reflow soldering ability test method for the lands of organic rigid printed boards in applications using solder alloys, which are eutectic or near-eutectic tin-lead (Pb), or lead-free alloys.
The printed boards materials for this organic rigid printed boards are epoxide woven E-glass lamin...
view more

    • sale 15% off
    • Standard
      80 pages
      English and French language

IEC TR 61850-90-13:2021(E), which is a Technical Report, provides information, use cases, and guidance on whether and how to use deterministic networking technologies. Furthermore, this document comprises technology descriptions, provides guidance how to achieve compatibility and interoperability with existing technologies, and lays out migration paths. It will separate the problem statement from the possible solutions.

    • sale 15% off
    • Technical report
      60 pages
      English language

IEC 62906-5-3:2021(E) specifies the standard measurement conditions and measuring methods for determining the parameters of image quality for full-frame laser projection displays integrating the projection devices and screens. The front and rear projection screens are included in this document. Other display devices, such as raster-scanned (flying spot) projection devices, are not included.

    • sale 15% off
    • Standard
      18 pages
      English language

IEC 62372:2021 is applicable to housed scintillators for registration and spectrometry of alpha-, beta-, gamma-, X-ray and neutron radiation. This document specifies the requirements for the testing equipment and test methods of the basic parameters, of housed scintillators, such as:
- the direct method is applicable to measure the light output of housed scintillators based on scintillation material. The housed scintillators certified by this method can be used as working standard of housed sci...
view more

    • sale 15% off
    • Standard
      19 pages
      English language

IEC 61189-5-502:2021 is used for evaluating the changes to the surface insulation resistance of a pre-selected material set on a representative test coupon and quantifies the deleterious effects of improperly used materials and processes that can lead to decreases in electrical resistance.

    • sale 15% off
    • Standard
      45 pages
      English and French language

IEC 61869-13:2021 is a product standard and covers only additional requirements for stand-alone merging units (SAMUs) used for AC applications having rated frequencies from 15 Hz to 100 Hz. The digital output format specification is not covered by this document; it is standardized in IEC 61869-9 as an application of IEC 61850, which specifies the power utility communication architecture.
This document covers SAMUs having standardized analogue inputs (for example: 1 A, 5 A, 3,25 V / √3 or 100 V ...
view more

    • sale 15% off
    • Standard
      141 pages
      English and French language

IEC 60079-47:2021(E), which is a technical specification, specifies requirements for the construction, marking and documenting of apparatus, systems and installations for use with the 2-Wire Intrinsically Safe Ethernet concept (2-WISE), such as the physical layer specification for 2-Wire Ethernet 10BASE-T1L as defined in IEEE 802.3cg.
2-WISE is a concept for an advanced physical layer (APL), designed to simplify the examination process for intrinsic safety parameters of components and cabling w...
view more

    • sale 15% off
    • Technical specification
      14 pages
      English language

IEC 60958-5:2021 enhances the consumer application of the interface for the interconnection of digital audio equipment defined in IEC 60958-1 and IEC 60958-3, introducing:
- multichannel;
- multi-stream;
- high-resolution;
- multimedia extension;
- related applications.

    • sale 15% off
    • Standard
      40 pages
      English and French language

IEC 62787:2021 specifies the minimum requirements for the qualification of concentrator photovoltaic (CPV) cells and Cell on Carrier (CoC) assemblies for incorporation into CPV receivers, modules and systems. The object of this qualification standard is to determine the optoelectronic, mechanical, thermal, and processing characteristics of CPV cells and CoCs to show that they are capable of withstanding assembly processes and CPV application environments. The qualification tests of this document...view more

    • sale 15% off
    • Standard
      70 pages
      English and French language

IEC 61760-3:2021 gives a reference set of requirements, process conditions and related test conditions to be used when compiling specifications of electronic components that are intended for usage in through-hole reflow soldering technology.
The object of this document is to ensure that components with leads intended for through-hole reflow and surface mounting components can be subjected to the same placement and mounting processes. Hereto, this document defines test and requirements that need...
view more

    • sale 15% off
    • Standard
      57 pages
      English and French language

IEC TS 61994-3:2021(E) gives the terms and definitions for piezoelectric, dielectric and electrostatic oscillators representing the state of the art, which are intended for use in the standards and documents of IEC TC 49.
The main changes with respect to the previous edition are as listed below:
- some definitions have been updated;
- the terminology given in IEC 60679-1:2017 has been taken into account;
- new terminologies are added.

    • sale 15% off
    • Technical specification
      19 pages
      English language

IEC 61083-1:2021 is applicable to digital recorders, including digital oscilloscopes, used for measurements during tests with high impulse voltages and high impulse currents. It specifies the measuring characteristics and calibrations required to meet the measuring uncertainties and procedures specified in IEC 60060-2 and IEC 62475.
This document
• defines the terms specifically related to digital recorders;
• specifies the necessary requirements for such instruments to ensure their complianc...
view more

    • sale 15% off
    • Standard
      50 pages
      English and French language

IEC 60794-3-12:2021 is available as IEC 60794-3-12:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60794-3-12:2021 is a detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling to ensure compatibility with ISO/IEC 11801-1. This document's requirements ensure that the ISO/IEC 11801-1 models work for generic cabling and system per...
view more

    • sale 15% off
    • Standard
      17 pages
      English and French language

IEC TS 62966-3:2021 defines the requirements for operational and personal safety of aisle containments for IT cabinets.
The aim is to provide physical security for the IT equipment installed in the containment using the criteria “availability” and “safety”.
The requirements apply to all operational, working and maintenance procedures.
This document does not apply to ordinary persons, when using installations and equipment.
The requirements described herein are also intended to ensure that it...
view more

    • sale 15% off
    • Technical specification
      20 pages
      English language

IEC TS 63105:2021(E) establishes terms and definitions in the field of lighting systems and related equipment.
Terminological literature for other fields of lighting is listed in the bibliography.

    • sale 15% off
    • Technical specification
      9 pages
      English language

IEC 61189-5-501:2021 is used to quantify the deleterious effects of flux residues on surface insulation resistance (SIR) in the presence of moisture.

    • sale 15% off
    • Standard
      37 pages
      English and French language

IEC TS 63058:2021 provides guidance to manufacturers of low-voltage switchgear and controlgear and their assemblies in evaluating and improving the environmental impact of their products, and in enabling effective communication using common references for environmental information throughout the supply chain.

    • sale 15% off
    • Technical specification
      112 pages
      English and French language

IEC 62899-302-3:2021(E) specifies in-flight imaging methods for the measurement of the direction of ink drops jetted from inkjet print-heads using drop watchers. It does not apply to holographic or other interference techniques, or to any method assessing deposited ink drops. It is specific to drop-on-demand type inkjet print-heads (used in printed electronics equipment).

    • sale 15% off
    • Standard
      20 pages
      English language