Rubber hoses and hose assemblies for use in oil burners - Specification (ISO/DIS 6806:2023)

ISO 6806:2017 specifies the minimum requirements for rubber hoses and hose assemblies for use in oil burners.
The following two types of hose assembly are specified.
- Type 1: Hose assemblies for flux and reflux, but not for insertion between the oil burner pump and the atomizing connection; maximum working pressure 1,0 MPa (10 bar); maximum oil temperature 100 °C.
- Type 2: Hose assemblies for insertion between the oil burner pump and the atomizing connection; maximum working pressure 4,0 MPa (40 bar); maximum oil temperature 100 °C.
The hose assemblies specified in this document are not intended to be used, without special assessment, for purposes other than oil burner installations.

Gummischläuche und Schlauchleitungen für den Einsatz in Ölbrennern - Anforderung (ISO/DIS 6806:2023)

Tuyaux et flexibles en caoutchouc pour brûleurs à fuel - Spécifications (ISO/DIS 6806:2023)

ISO 6806:2017 spécifie les exigences minimales pour les tuyaux et les flexibles en caoutchouc utilisés pour les brûleurs à fuel.
Les deux types suivants de flexibles sont spécifiés.
- Type 1: Flexibles pour le flux et le reflux, mais pas pour l'installation entre la pompe du brûleur et le système de pulvérisation; pression maximale de service 1,0 MPa (10 bar); température maximale du fuel 100 °C.
- Type 2: Flexibles pour installation entre la pompe du brûleur et le système de pulvérisation; pression maximale de service 4,0 MPa (40 bar); température maximale du fuel 100 °C.
Les flexibles spécifiés dans le présent document ne sont pas destinés à être utilisés, sans évaluation spéciale, pour d'autres applications que les installations de brûleurs à fuel.

Gumene cevi in cevni priključki za oljne gorilnike - Specifikacija (ISO/DIS 6806:2023)

General Information

Status
Not Published
Publication Date
24-Oct-2023
Current Stage
6055 - CEN Ratification completed (DOR) - Publishing
Start Date
25-Aug-2023
Completion Date
25-Aug-2023

Relations

Buy Standard

Draft
prEN ISO 6806:2023
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 6806:2023
01-julij-2023
Gumene cevi in cevni priključki za oljne gorilnike - Specifikacija (ISO/DIS
6806:2023)
Rubber hoses and hose assemblies for use in oil burners - Specification (ISO/DIS
6806:2023)
Gummischläuche und Schlauchleitungen für den Einsatz in Ölbrennern - Anforderung
(ISO/DIS 6806:2023)
Tuyaux et flexibles en caoutchouc pour brûleurs à fuel - Spécifications (ISO/DIS
6806:2023)
Ta slovenski standard je istoveten z: prEN ISO 6806
ICS:
27.060.10 Gorilniki na tekoče in trdo Liquid and solid fuel burners
gorivo
83.140.40 Gumene cevi Hoses
oSIST prEN ISO 6806:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 6806:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 6806:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 6806
ISO/TC 45/SC 1 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-05-01 2023-07-24
Rubber hoses and hose assemblies for use in oil burners —
Specification
Tuyaux et flexibles en caoutchouc pour brûleurs à fuel — Spécifications
ICS: 27.060.10; 83.140.40
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 6806:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 6806:2023
ISO/DIS 6806:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 6806
ISO/TC 45/SC 1 Secretariat: DIN
Voting begins on: Voting terminates on:

Rubber hoses and hose assemblies for use in oil burners —
Specification
Tuyaux et flexibles en caoutchouc pour brûleurs à fuel — Spécifications
ICS: 27.060.10; 83.140.40
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 6806:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 6806:2023
ISO/DIS 6806:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Construction .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.