CEN/TR 10362:2014
(Main)Chemical analysis of ferrous materials - Determination of selenium in steels - Electrothermal atomic absorption spectrometric method
Chemical analysis of ferrous materials - Determination of selenium in steels - Electrothermal atomic absorption spectrometric method
This Technical Report specifies an electrothermal atomic absorption spectrometric method for the determination of selenium in steels.
The method is applicable to selenium contents between 0,000 4 % (m/m) and 0,02 % (m/m).
Chemische Analyse von Eisenwerkstoffen - Bestimmung von Selen in Stahl - Spektrometrisches Verfahren mit elektrothermischer Atomabsorption
Analyse chimique des produits ferreux - Détermination du sélénium dans les aciers - Méthode par spectrométrie d'absorption atomique électrothermique
Le présent Rapport Technique spécifie une méthode de détermination du sélénium dans les aciers, par spectrométrie d'absorption atomique électrothermique.
La méthode est applicable aux teneurs en sélénium comprises entre 0,000 4 % (m/m) et 0,02 % (m/m).
Kemijska analiza železovih zlitin - Določevanje selena v jeklih - Elektrotermična atomska absorpcijska spektrometrija
Ta tehnični standard določa elektrotermično atomsko absorpcijsko spektrometrijo za določevanje selena v jeklih.
Ta metoda se uporablja za vsebnosti selena med 0,0004 % (m/m) in 0,02 % (m/m).
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TP CEN/TR 10362:2015
01-februar-2015
.HPLMVNDDQDOL]DåHOH]RYLK]OLWLQ'RORþHYDQMHVHOHQDYMHNOLK(OHNWURWHUPLþQD
DWRPVNDDEVRUSFLMVNDVSHNWURPHWULMD
Chemical analysis of ferrous materials - Determination of selenium in steels -
Electrothermal atomic absorption spectrometric method
Chemische Analyse der Eisen und Stahlwerkstoffe - Bestimmung des Selengehaltes in
Stahl
Analyse chimique des produits ferreux - Détermination du sélénium dans les aciers -
Méthode par spéctrométrie d'absorption atomique éléctrothermique
Ta slovenski standard je istoveten z: CEN/TR 10362:2014
ICS:
77.040.30 Kemijska analiza kovin Chemical analysis of metals
77.080.20 Jekla Steels
SIST-TP CEN/TR 10362:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TP CEN/TR 10362:2015
---------------------- Page: 2 ----------------------
SIST-TP CEN/TR 10362:2015
TECHNICAL REPORT
CEN/TR 10362
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
November 2014
ICS 77.040.30; 77.080.20
English Version
Chemical analysis of ferrous materials - Determination of
selenium in steels - Electrothermal atomic absorption
spectrometric method
Analyse chimique des produits ferreux - Détermination du Chemische Analyse von Eisenwerkstoffen - Bestimmung
sélénium dans les aciers - Méthode par spectrométrie von Selen in Stahl - Spektrometrisches Verfahren mit
d'absorption atomique électrothermique elektrothermischer Atomabsorption
This Technical Report was approved by CEN on 10 May 2014. It has been drawn up by the Technical Committee ECISS/TC 102.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 10362:2014 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TP CEN/TR 10362:2015
CEN/TR 10362:2014 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Principle .4
4 Reagents .4
5 Apparatus .5
6 Sampling .5
7 Procedure .6
8 Measurements .7
9 Expression of results .7
10 Precision .8
11 Test report .8
Annex A (informative) Typical operating parameters .9
Annex B (informative) Instruments and the instrumental conditions used by the participants to
the precision test . 11
Annex C (informative) Composition of the samples used for the precision test . 12
Annex D (informative) Detai
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.