CEN/TR 15226:2006
(Main)Building products - Treatment of acoustics in product technical specifications
Building products - Treatment of acoustics in product technical specifications
This document specifies the technical requirements relating to acoustics for a product standard, European Technical Approval Guidelines (ETAG) or European Technical Approval (ETA) for a specific building product or equipment, or a family of building products or equipment. In particular, it gives advice on how to write requirements in response to the mandated characteristics on acoustics under the Construction Products Directive.
NOTE 1 In the remainder of this document, the terms used relate to CEN and product standards. The concepts are, however, equally applicable to the European Organisation for Technical Approvals (EOTA).
The purpose of this document is to assist the product Technical Committees in preparing acoustic clauses to ensure that such product standards:
- are as homogeneous as possible, with each individual product standard having the same basic structure;
- are in full accordance with the standards for the measurement of acoustic properties;
- reflect the latest technical knowledge of methods of determining the acoustical properties from the specific family of building products or equipment under consideration.
NOTE 2 Clause 2 lists the European and International Standards to be used in the drafting of acoustic provisions standard. Annex A contains an outline of a typical acoustic product standard summarizing the information that is required. Annex B contains guidance on choosing appropriate properties. Annex C describes the relevant measured acoustic properties for common products.
Bauprodukte - Behandlung der Akustik in technischen Produktspezifikationen
Gradbeni proizvodi - Podajanje akustičnih lastnosti v tehničnih specifikacijah proizvodov
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TP CEN/TR 15226:2006
01-julij-2006
*UDGEHQLSURL]YRGL3RGDMDQMHDNXVWLþQLKODVWQRVWLYWHKQLþQLKVSHFLILNDFLMDK
SURL]YRGRY
Building products - Treatment of acoustics in product technical specifications
Bauprodukte - Behandlung der Akustik in technischen Produktspezifikationen
Ta slovenski standard je istoveten z: CEN/TR 15226:2006
ICS:
01.110 7HKQLþQDGRNXPHQWDFLMD]D Technical product
L]GHONH documentation
91.120.20 $NXVWLNDYVWDYEDK=YRþQD Acoustics in building. Sound
L]RODFLMD insulation
SIST-TP CEN/TR 15226:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TP CEN/TR 15226:2006
---------------------- Page: 2 ----------------------
SIST-TP CEN/TR 15226:2006
TECHNICAL REPORT
CEN/TR 15226
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
March 2006
ICS 03.120.10; 11.020
English Version
Building products - Treatment of acoustics in product technical
specifications
Bauprodukte - Behandlung der Akustik in technischen
Produktspezifikationen
This Technical Report was approved by CEN on 22 October 2005. It has been drawn up by the Technical Committee CEN/TC 126.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 15226:2006: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TP CEN/TR 15226:2006
CEN/TR 15226:2006 (E)
Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .5
4 Requirements for the contents of a product standard .14
5 Extension rules for the declaration of acoustic properties.20
Annex A (informative) Items to be covered in a product standard .24
Annex B (informative) Choosing appropriate properties .25
Annex C (normative) Relevant measured acoustic properties for some common products .27
Annex D (informative) Examples of rules for direct and extended application of test results.33
Bibliography .34
2
---------------------- Page: 4 ----------------------
SIST-TP CEN/TR 15226:2006
CEN/TR 15226:2006 (E)
Foreword
This Technical Report (CEN/TR 15226:2006) has been prepared by Technical Committee CEN/TC 126
“Acoustic properties of building products and of buildings”, the secretariat of which is held by AFNOR.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
In addition to using this document, it is recommended that product Technical Committees contact
CEN/TC 126 for advice on acoustic issues relating to the treatment of acoustics in technical specifications.
3
---------------------- Page: 5 ----------------------
SIST-TP CEN/TR 15226:2006
CEN/TR 15226:2006 (E)
1 Scope
This document specifies the technical requirements relating to acoustics for a product standard, European
Technical Approval Guidelines (ETAG) or European Technical Approval (ETA) for a specific building product
or equipment, or a family of building products or equipment. In particular, it gives advice on how to write
requirements in response to the mandated characteristics on acoustics under the Construction Products
Directive.
NOTE 1 In the remainder of this document, the terms used relate to CEN and product standards. The concepts are,
however, equally applicable to the European Organisation for
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.