IEC 60068-2-38:2021 is available as IEC 60068-2-38:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60068-2-38:2021 specifies a composite test procedure, primarily intended for component type specimens, to determine, in an accelerated manner, the resistance of specimens to the deteriorative effects of high temperature/humidity and cold conditions. This test standard does not apply to spe...
view more

    • sale 15% off
    • Standard
      45 pages
      English and French language

IEC 60068-2-11:2021 specifies a test method for assessing the corrosion resistance of electrotechnical products components, equipment and materials in a salt mist environment. Its objective is to verify that the comparative quality of a metallic material, with or without corrosion protection, is maintained when exposed to salt mist.
This test method is useful for evaluating the quality and the uniformity of coatings applied to protect metals against corrosion. It is particularly useful for dete...
view more

    • sale 15% off
    • Standard
      33 pages
      English and French language

IEC 60068-2-13:2021 specifies methods of test applicable to specimens which, during transportation, storage or in service, can be subjected to low air pressure.
This fifth edition cancels and replaces the fourth edition, published in 1983. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) alignment with recently revised parts of IEC 60068-2;
b) Clause 5: severities aligned with IEC 60721-2...
view more

    • sale 15% off
    • Standard
      21 pages
      English and French language

REN/EE-0257

    • sale 15% off
    • Standard
      44 pages
      English language
    • sale 10% off
    • Standard
      44 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      44 pages
      English language

This document provides a series of standard testing methods to determine the resistance of flat or curved surfaces against abrasion, scratch or punch under high dynamics as may occur for example by manually operating actuators or due to impacts of materials like shoes, cases, bags and other common objects of everyday’s usage inside an aircraft cabin. The method is also suitable to test the resistance of a surface against all other high dynamic strains.

    • sale 10% off
    • Standard
      11 pages
      English language
    • e-Library read for
      1 day

The present document specifies test severities and methods for the verification of the required resistibility of equipment
according to the relevant environmental class.
The tests in the present document apply to stationary use of equipment at weatherprotected locations covering the
environmental conditions stated in ETSI EN 300 019-1-3 [1].

    • sale 15% off
    • Standard
      37 pages
      English language
    • sale 10% off
    • Standard
      37 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      37 pages
      English language

This part of IEC 60068 specifies a uniform and reproducible method of confirming that
temperature test chambers conform to the requirements specified in the climatic test procedures
of IEC 60068-2-1 and IEC 60068-2-2, when loaded with either heat-dissipating or non heatdissipating
specimens under conditions which take into account air circulation inside the
working space of the chamber. This document is intended primarily for users when conducting
regular chamber performance monitoring.

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day

This part of IEC 60721 provides guidance on the use of all parts of IEC 60721-3. It contains
background information including information on the application and limitation of the classes
given in various parts of IEC 60721-3 which can be used in the design, limitation of conditions
and protection of equipment.
Reference to IEC 60721-3-0 is important in order to avoid misuse of the classes defined in the
other parts of IEC 60721-3.

    • sale 10% off
    • Standard
      11 pages
      English language
    • e-Library read for
      1 day

IEC 60068-3-7:2020 is available as IEC 60068-3-7:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60068-3-7:2020 specifies a uniform and reproducible method of confirming that temperature test chambers conform to the requirements specified in the climatic test procedures of IEC 60068-2-1 and IEC 60068-2-2, when loaded with either heat-dissipating or non heat-dissipating specimens under...
view more

    • sale 15% off
    • Standard
      24 pages
      English and French language

The present document proposes an evolved version of the Green Abstraction Layer formulation capable of operating within ETSI NFV environments.

    • sale 15% off
    • Standard
      71 pages
      English language
    • sale 15% off
    • Standard
      71 pages
      English language
    • sale 10% off
    • Standardization document
      71 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standardization document
      71 pages
      English language
    • e-Library read for
      1 day

IEC 60721-3-0:2020 provides guidance on the use of all parts of IEC 60721-3. It contains background information including information on the application and limitation of the classes given in various parts of IEC 60721-3 which can be used in the design, limitation of conditions and protection of equipment.
This second edition cancels and replaces the first edition published in 1984 and Amendment 1:1987. This edition constitutes a technical revision.
This edition includes the following signific...
view more

    • sale 15% off
    • Standard
      17 pages
      English and French language

IEC TR 63212:2020 provides a feasibility assessment to determine if harmonization of environmental performance criteria is possible and would benefit the electrotechnical industry.
This document is intended as a feasibility study report rather than a standard. It reports the possibility/opportunity to harmonize environmental performance criteria and, with it, the feasibility for future development of an international standard on environmental performance criteria. The learnings and recommendati...
view more

    • sale 15% off
    • Technical report
      34 pages
      English language

IEC 62131-7:2020(E), reviews the available dynamic data relating to the transportation of electrotechnical equipment by rotorcraft (helicopters). The intent is that from all the available data an environmental description will be generated and compared to that set out in IEC 60721 (all parts).

    • sale 15% off
    • Technical report
      51 pages
      English language

IEC TR 63141:2020(E) describes a new test method to control the volume of air injected into a conventional HAST chamber filled with water vapour. This document provides an overview of the conventional HAST chamber, an overview of the air-HAST equipment where air is incorporated into the HAST chamber, an example of an air-HAST test apparatus, and application examples of air-HAST.

    • sale 15% off
    • Technical report
      56 pages
      English language

The present document specifies test methods and severities for verification of the required resistibility of equipment
according to the relevant environmental class.
The tests defined in the present document apply to stationary use at underground locations covering the environmental
conditions stated in ETSI EN 300 019-1-8 [1].

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      15 pages
      English language
    • sale 15% off
    • Standard
      15 pages
      English language
    • sale 10% off
    • Amendment
      12 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      12 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      12 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      12 pages
      English language
    • e-Library read for
      1 day

This document applies primarily to electro-technical equipment but its application can be extended to other equipment and to components. In addition, if some type of analysis is always performed when making a seismic qualification, for example for the choice of the representative sample to be tested or for the extension of the seismic qualification from the tested specimen to similar specimens, the verification of the performance of an equipment by analysis or by a combination of testing and ana...view more

    • sale 10% off
    • Standard
      50 pages
      English language
    • e-Library read for
      1 day

IEC 60068-3-3:2019 applies primarily to electro-technical equipment but its application can be extended to other equipment and to components. In addition, if some type of analysis is always performed when making a seismic qualification, for example for the choice of the representative sample to be tested or for the extension of the seismic qualification from the tested specimen to similar specimens, the verification of the performance of an equipment by analysis or by a combination of testing an...view more

    • sale 10% off
    • Standard
      50 pages
      English language
    • e-Library read for
      1 day

ISO 35103:2017 gives requirements, specifications and guidelines to ensure that environmental monitoring in the offshore Arctic region is fit for purpose. The Arctic region includes the territory lying to the North of the Arctic Circle (Latitude 66°33′45.8″). This document can be applied to sub-Arctic locations which experience Arctic-like conditions and contain relevant components of a cold-climate ecosystem.
ISO 35103:2017 is applicable to all Arctic oil and gas operations from licence block ...
view more

    • sale 10% off
    • Standard
      37 pages
      English language
    • e-Library read for
      1 day

This document applies to the three main methods for measuring oxygen by its paramagnetic property, which are outlined in the introduction. It considers essential ancillary units and applies to analyzers installed indoors and outdoors. Safety-critical applications can require additional requirements from system and analyzer specifications not covered in this document. This document is intended - to specify terminology and definitions related to the functional performance of paramagnetic gas analy...view more

    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day

Provides a standard test procedure for the purpose of evaluating the resistance of small electrotechnical products, primarily non-hermetically sealed components, to the deteriorative effect of damp heat. Is not intended to evaluate external effects such as corrosion and deformation.

    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day

This document demonstrates the adequacy of specimens to resist dynamic loads without unacceptable degradation of its functional and/or structural integrity when subjected to the specified vibration test requirements as defined by a time history (long time history replication). These can either be recorded in measurement exercises or generated artificially. In both cases, this method allows for generating a test tailored to very specific applications. Typical applications are tests in which very ...view more

    • sale 10% off
    • Standard
      24 pages
      English language
    • e-Library read for
      1 day

Provides a standard test procedure for the purpose of evaluating the resistance of small electrotechnical products, primarily non-hermetically sealed components, to the deteriorative effect of damp heat. Is not intended to evaluate external effects such as corrosion and deformation.

    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day

IEC 61207-3:2019 is available as IEC 61207-3:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 61207-3:2019 applies to the three main methods for measuring oxygen by its paramagnetic property, which are outlined in the introduction. It considers essential ancillary units and applies to analyzers installed indoors and outdoors. Safety-critical applications can require additional requiremen...view more

    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day

IEC 60068-3-3:2019 applies primarily to electro-technical equipment but its application can be extended to other equipment and to components. In addition, if some type of analysis is always performed when making a seismic qualification, for example for the choice of the representative sample to be tested or for the extension of the seismic qualification from the tested specimen to similar specimens, the verification of the performance of an equipment by analysis or by a combination of testing an...view more

    • sale 15% off
    • Standard
      95 pages
      English and French language

IEC 60068-2-85:2019 demonstrates the adequacy of specimens to resist dynamic loads without unacceptable degradation of its functional and/or structural integrity when subjected to the specified vibration test requirements as defined by a time history (long time history replication). These can either be recorded in measurement exercises or generated artificially. In both cases, this method allows for generating a test tailored to very specific applications.

    • sale 10% off
    • Standard
      24 pages
      English language
    • e-Library read for
      1 day

This part of IEC 60721 classifies groups of environmental parameters and their severities to
which products are subjected when installed for stationary use at non-weatherprotected
locations. Weatherprotected locations where products can be mounted for stationary use
permanently or temporarily are addressed in IEC 60721-3-3.
The environmental conditions specified in this document are limited to those which can
directly affect the performance of products. Only environmental conditions as such...
view more

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This part of IEC 60721 classifies groups of environmental parameters and their severities to
which products are subjected when installed for stationary use at weatherprotected locations.
The environmental conditions specified in this document are limited to those which can directly
affect the performance of products. Only environmental conditions as such are considered. No
special description of the effects of these conditions on the products is provided.
Environmental conditions directly r...
view more

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

This part of IEC 60068 specifies tests for the whiskering propensity of surface finishes of
electric or electronic components and mechanical parts such as punched/stamped parts (for
example, jumpers, electrostatic discharge protection shields, mechanical fixations, press-fit
pins and other mechanical parts used in electronic assemblies) representing the finished
stage, with tin or tin-alloy finish. Changes of the physical dimensions of mould compounds,
plastics and the like during the requi...
view more

    • sale 10% off
    • Standard
      35 pages
      English language
    • e-Library read for
      1 day

IEC 60721-3-3:2019 classifies groups of environmental parameters and their severities to which products are subjected when installed for stationary use at weatherprotected locations. This third edition cancels and replaces the second edition published in 1994, Amendment 1: 1995 and Amendment 2:1996. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) Clause 3: definitions aligned with IEC 60721-...view more

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

IEC 60721-3-4:2019 classifies groups of environmental parameters and their severities to which products are subjected when installed for stationary use at non-weatherprotected locations. Weatherprotected locations where products can be mounted for stationary use permanently or temporarily are addressed in IEC 60721-3-3. This third edition cancels and replaces the second edition published in 1995 and Amendment 1:1996. This edition constitutes a technical revision. This edition includes the follow...view more

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

IEC 60068-2-82:2019 specifies tests for the whiskering propensity of surface finishes of electric or electronic components and mechanical parts such as punched/stamped parts (for example, jumpers, electrostatic discharge protection shields, mechanical fixations, press‑fit pins and other mechanical parts used in electronic assemblies) representing the finished stage, with tin or tin-alloy finish. Changes of the physical dimensions of mould compounds, plastics and the like during the required test...view more

    • sale 10% off
    • Standard
      35 pages
      English language
    • e-Library read for
      1 day

IEC 61207-3:2019 is available as IEC 61207-3:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61207-3:2019 applies to the three main methods for measuring oxygen by its paramagnetic property, which are outlined in the introduction. It considers essential ancillary units and applies to analyzers installed indoors and outdoors. Safety-critical applications can require additional requireme...
view more

    • sale 15% off
    • Standard
      58 pages
      English and French language

IEC 60068-2-85:2019 demonstrates the adequacy of specimens to resist dynamic loads without unacceptable degradation of its functional and/or structural integrity when subjected to the specified vibration test requirements as defined by a time history (long time history replication). These can either be recorded in measurement exercises or generated artificially. In both cases, this method allows for generating a test tailored to very specific applications.

    • sale 15% off
    • Standard
      43 pages
      English and French language

IEC 60721-3-3:2019 classifies groups of environmental parameters and their severities to which products are subjected when installed for stationary use at weatherprotected locations.
This third edition cancels and replaces the second edition published in 1994, Amendment 1: 1995 and Amendment 2:1996. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) Clause 3: definitions aligned with IEC 607...
view more

    • sale 15% off
    • Standard
      29 pages
      English and French language

IEC 60721-3-4:2019 classifies groups of environmental parameters and their severities to which products are subjected when installed for stationary use at non-weatherprotected locations. Weatherprotected locations where products can be mounted for stationary use permanently or temporarily are addressed in IEC 60721-3-3.
This third edition cancels and replaces the second edition published in 1995 and Amendment 1:1996. This edition constitutes a technical revision.
This edition includes the foll...
view more

    • sale 15% off
    • Standard
      32 pages
      English and French language

The present document contains requirements and measurements methods for the physical interface "A" that is situated
between the power supply system(s) and the power consuming ICT equipment.
The nominal voltage at power interface "A" of ICT equipment defined in the present document is DC voltage -48 V.
The DC power can be supplied by a DC output power system (e.g. based on AC rectifiers on grid or DC/DC converters on
solar system, fuel cell, DC engine or fuel cell generator) and also directly...
view more

    • sale 15% off
    • Standard
      37 pages
      English language
    • sale 10% off
    • Standard
      37 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      37 pages
      English language

IEC 60068-2-82:2019 specifies tests for the whiskering propensity of surface finishes of electric or electronic components and mechanical parts such as punched/stamped parts (for example, jumpers, electrostatic discharge protection shields, mechanical fixations, press‑fit pins and other mechanical parts used in electronic assemblies) representing the finished stage, with tin or tin-alloy finish. Changes of the physical dimensions of mould compounds, plastics and the like during the required test...view more

    • sale 15% off
    • Standard
      68 pages
      English and French language

The present document contains requirements for:
• the output of the power supply feeding interface A1;
• the input of the ICT equipment connected to interface A1.
The voltage at interface A1 defined in the present document is single phase and three phase AC.
The following voltage range categories are covered:
• Narrow single phase A1n-1p and narrow three phase A1n-3p AC voltage range defined to comply with nominal
European AC voltages [i.2].
• Wide single phase A1w-1p and wide three phase...
view more

    • sale 15% off
    • Standard
      29 pages
      English language
    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      29 pages
      English language
    • sale 15% off
    • Standard
      31 pages
      English language

The present document defines measurement and monitoring of power, energy and environmental parameters for ICT equipment in telecommunications or datacenter or customer premises.
It defines the power, energy and environmental parameters monitoring interface of ICT equipment based on generic ETSI ES 202 336-1 [1] interface so that correlations can be made with ICT equipment parameters (traffic, flowrate, number of connected lines, radio setting, QoS KPI, etc.) in the network management system.
C...
view more

    • sale 15% off
    • Standard
      42 pages
      English language
    • sale 15% off
    • Standard
      42 pages
      English language
    • sale 10% off
    • Standardization document
      42 pages
      English language
    • e-Library read for
      1 day

The present document specifies the method and metrics to determine the energy efficiency of operational Network
Function Virtualisation (NFV) applications and their associated infrastructure when that infrastructure is implemented
outside the boundaries of the access fixed, cable and mobile networks which they serve.
The present document:
• Extends the Objective KPIs of ETSI EN 305 200-2-2 [i.2] (fixed access networks) and ETSI
EN 305 200-2-3 [i.3] (mobile access networks) to assess the imp...
view more

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      20 pages
      English language
    • sale 15% off
    • Standard
      20 pages
      English language