35.200 - Interface and interconnection equipment

ISO/IEC 14763-4:2021(E) specifies the measurement of two- and four-pair balanced cabling of a) end-to-end (E2E) link Class D, E and EA; b) modular plug terminated links (MPTLs) of Class D, E, EA, F, FA and of Class I and II; c) direct attach cabling of Class D, E, EA, F, FA and of Class I and II. The free connectors which terminate two and four pairs in field and laboratory conditions are included. This second edition cancels and replaces the first edition published in 2018. This edition constit...view more

ISO/IEC 14763-4:2021 (E) specifies the measurement of two- and four-pair balanced cabling of
a) end-to-end (E2E) link Class D, E and EA;
b) modular plug terminated links (MPTLs) of Class D, E, EA, F, FA and of Class I and II;
c) direct attach cabling of Class D, E, EA, F, FA and of Class I and II.
The free connectors which terminate two and four pairs in field and laboratory conditions are included.
This second edition cancels and replaces the first edition published in 2018. This edition c...view more

ISO/IEC 11801-9903:2021 (E) establishes a matrix-model for formulating limits for mixed mode parameters within and between two pairs of balanced cabling. This is for the purpose of supporting new, improved balanced cabling channel and link specifications.

ISO/IEC 11801-9903:2021 establishes a matrix-model for formulating limits for mixed mode parameters within and between two pairs of balanced cabling. This is for the purpose of supporting new, improved balanced cabling channel and link specifications.

IEC 62680-1-2:2021 defines a power delivery system covering all elements of a USB system including: Hosts, Devices, Hubs, Chargers and cable assemblies. This specification describes the architecture, protocols, power supply behavior, connectors and cabling necessary for managing power delivery over USB at up to 100W. This specification is intended to be fully compatible and extend the existing USB infrastructure. It is intended that this specification will allow system OEMs, power supply and per...view more

IEC 63245-1:2021 specifies requirements for spatial wireless power transfer based on multiple magnetic resonances (SWPT-MMR), which is a non-radiative wireless power transfer (WPT). This document contains two categories of requirements: general requirements and functional requirements. The general requirements cover charging procedures and charging zones. The functional requirements cover each component of a SWPT-MMR system, such as transmitter coils.

IEC 62680-1-3:2021 defines the USB Type-C™ receptacles, plug and cables.
The USB Type-C Cable and Connector Specification defines a new receptacle, plug, cable and detection mechanisms that are compatible with existing USB interface electrical and functional specifications. This specification covers the following aspects that are needed to produce and use this new USB cable/connector solution in newer platforms and devices, and that interoperate with existing platforms and devices:
- USB Type-...view more

This standard describes the physical interface portions of high performance optical link variants that support the higher level Fibre Channel protocols including FC-FS-4 (reference [1]) and FC-FS-5 (reference [2]). FC-PI-7 specifies 64GFC. 32GFC and 128GFC are described in FC-PI-6 (reference [3]) and FC-PI- 6P (reference [4]), respectively.16GFC, 8GFC and 4GFC are described in FC-PI-5 (reference [5]).

This part of IEC 62656 specifies a web service interface to exchange data parcel(s)
conformant to IEC 62656-1, between a parcel server and a parcel client or between parcel
servers. This interface comprises three basic services: a registration service, resolution
service and subscription service.
This document includes the following:
– holistic use scenario;
– detailed specification of the three basic services;
– JSON [1] and XML [5] notation schemas for data parcel(s).
The following ite...view more

The scope of this part of IEC 61968 is the description of a set of functions that are needed for
enterprise integration of DERMS functions. These exchanges are most likely between a DERMS
and a DMS. However, since this is an enterprise integration standard which may leverage
IEC 61968-100:2013 for application integration (using web services or JMS) or other looselycoupled
implementations, there are no technical limitations for systems with which a DERMS
might exchange information. Also, it ...view more

The common information model (CIM) is an abstract model that represents all the major objects
in an electric utility enterprise typically involved in utility operations. By providing a standard
way of representing power system resources as object classes and attributes, along with their
relationships, the CIM facilitates the integration and interoperability of network applications
developed independently by different vendors, between entire systems running network
applications developed ind...view more

ISO/IEC TR 15067-3-8:2020(E), which is a Technical Report, provides a conceptual framework for developing architectures and designing solutions related to transactive energy (TE). Transactive energy allows electricity generated locally by consumers using wind, solar, storage, etc., at homes or buildings to be sold into a competitive market. This document provides guidance for enhancing interoperability among distributed energy resources involved in energy management systems at homes and building...view more

This document, which is a Technical Report, explains the organization and structure of the transactive energy systems research, development, and deployment roadmap.

ISO/IEC TR 15067-3-8:2020 (E), which is a Technical Report, provides a conceptual framework for developing architectures and designing solutions related to transactive energy (TE). Transactive energy allows electricity generated locally by consumers using wind, solar, storage, etc., at homes or buildings to be sold into a competitive market. This document provides guidance for enhancing interoperability among distributed energy resources involved in energy management systems at homes and buildin...view more

ISO/IEC TR 15067-3-7:2020 (E), which is a Technical Report, explains the organization and structure of the transactive energy systems research, development, and deployment roadmap.

This specification is intended as an extension to the existing [USB 2.0], [USB 3.2], [USB Type-C
1.3] and [USBBC 1.2] specifications. It addresses only the elements required to implement
USB Power Delivery. It is targeted at power supply vendors, manufacturers of [USB 2.0], [USB
3.2], [USB Type-C 1.3] and [USBBC 1.2] Platforms, Devices and cable assemblies.
Normative information is provided to allow interoperability of components designed to this
specification. Informative information, when...view more

The present document is based on requirements from ETSI TS 102 656 [2].
The present document contains handover requirements and a handover specification for the data that is identified in
national legislations on Retained Data.
The present document considers both the requesting of retained data and the delivery of the results.
The present document defines an electronic interface. An informative annex describes how this interface may be
adapted for manual techniques. Apart from in annex I, t...view more

The present document defines an information model and protocol for generalized reconfigurable radio frequency
interface for reconfigurable REs except for reconfigurable mobile devices which are covered in [i.7] to [i.12]. The work
is based on the Use Cases defined in ETSI TR 103 585 [i.1], on the system requirements defined in ETSI
EN 303 641 [1] and on the radio reconfiguration related architecture for reconfigurable RE defined in ETSI
EN 303 648 [i.2].
The present document will be based o...view more

The present document defines an information model and protocol for multiradio interface for reconfigurable RE except
for reconfigurable mobile devices which are covered in [i.6] to [i.11]. The work is based on the Use Cases defined in
ETSI TR 103 585 [i.1], on the system requirements defined in ETSI EN 303 641 [1] and on the radio reconfiguration
related architecture for reconfigurable RE defined in ETSI EN 303 648 [i.2].
The present document is based on ETSI EN 303 146-1 [i.8] and provide a...view more

The scope of the present document is to define an information model and protocol for unified radio application interface
for radio equipment reconfiguration except for reconfigurable mobile devices which are covered in [i.6] to [i.11]. The
work is based on the Use Cases defined in ETSI TR 103 585 [i.1], on the system requirements defined in ETSI
EN 303 641 [1] and on the radio reconfiguration related architecture for reconfigurable RE defined in ETSI
EN 303 648 [i.2].
The present document w...view more

The scope of the present document is to define the generalized Radio Programming Interface (gRPI) for radio
equipment reconfiguration except for reconfigurable mobile devices which are covered in [i.4] to [i.9]. The work is
based on the Use Cases defined in ETSI TR 103 585 [i.1], on the system requirements defined in ETSI EN 303 641 [1]
and on the radio reconfiguration related architecture for radio equipment defined in ETSI EN 303 648 [i.2].
The present document will be based on ETSI EN 303...view more

This part of IEC 61968 is the first in a series that, taken as a whole, defines interfaces for the
major elements of an interface architecture for power system management and associated
information exchange.
This document identifies and establishes recommendations for standard interfaces based on
an Interface Reference Model (IRM). Subsequent clauses of this document are based on each
interface identified in the IRM. This set of standards is limited to the definition of interfaces.
They pr...view more

ISO/IEC TR 11801-9909:2020, which is a Technical Report, covers evaluation and recommendations for achieving extended reach, greater than 30 m, for 25 Gbit/s applications over balanced cabling channels. This document covers channel reference implementations, based on Category 8.1 and Category 8.2, 2 000 MHz, components. The channel and component category specifications covered in this document are not intended to be normative.

ISO/IEC TR 11801-9910:2020, which is a Technical Report, provides definitions for, and examples of, modular plug terminated link configurations. This document provides performance specifications for Classes D, E, EA, F, FA, I and II modular plug terminated links. Test methods are provided in Clause 8 and are specified in ISO/IEC 14763-4

ISO/IEC TR 11801-9910:2020, which is a Technical Report, provides definitions for, and examples of, modular plug terminated link configurations.
This document provides performance specifications for Classes D, E, EA, F, FA, I and II modular plug terminated links.
Test methods are provided in Clause 8 and are specified in ISO/IEC 14763-4

ISO/IEC TR 11801-9909:2020, which is a Technical Report, covers evaluation and recommendations for achieving extended reach, greater than 30 m, for 25 Gbit/s applications over balanced cabling channels.
This document covers channel reference implementations, based on Category 8.1 and Category 8.2, 2 000 MHz, components.
The channel and component category specifications covered in this document are not intended to be normative.

The Audio Device Class Definition applies to all devices or functions embedded in composite devices that are
used to manipulate audio, voice, and sound-related functionality. This includes both audio data (analog and
digital) and the functionality that is used to directly control the audio environment, such as Volume and Tone
Control. The Audio Device Class does not include functionality to operate transport mechanisms that are
related to the reproduction of audio data, such as tape transpor...view more

This document is the Release 3.0 of this device class definition.

The intention of this document is to describe in detail all the Audio Data Formats that are supported by the
Audio Device Class. This document is considered an integral part of the Audio Device Class Specification,
although subsequent revisions of this document are independent of the revision evolution of the main USB
Audio Specification. This is to easily accommodate the addition of new Audio Data Formats without impeding
the core USB Audio Specification.

The USB Audio Device Class Definition for Basic Audio Functions applies to all USB Audio Functions that are
based on the Universal Serial Bus Device Class Definition for Audio Devices Release 3.0. It defines baseline audio
functionality for all ADC 3.0 compliant Hosts and Devices.

The present document is based on requirements from ETSI TS 102 656 [2].
The present document contains handover requirements and a handover specification for the data that is identified in national legislations on Retained Data.
The present document considers both the requesting of retained data and the delivery of the results.
The present document defines an electronic interface. An informative annex describes how this interface may be adapted for manual techniques. Apart from in annex I, the...view more

This standard specifies interchange and arithmetic formats and methods for binary and decimal floating-point arithmetic in computer programming environments. This standard specifies exception conditions and their default handling. An implementation of a floating-point system conforming to this standard may be realized entirely in software, entirely in hardware, or in any combination of software and hardware. For operations specified in the normative part of this standard, numerical results and e...view more

IEC 62386-105:2020 applies to control gear and control devices. Typically, a bus unit according to IEC 62386 (all parts) contains firmware. There are circumstances where it might be necessary to change the firmware after production or shipping of the product. For example if the bus unit does not operate as intended. In such a case, a firmware update of a bus unit via the interface is beneficial. This firmware update process is primarily designed to be a bug fix process, not a feature extension p...view more

ISO/IEC TR 11801-9908:2020 (E) which is a Technical Report, provides a listing of the data centre application options currently available or in process of standardization utilizing duplex and parallel optical fibre channels. It also identifies migration considerations when upgrading to higher speed applications.

ISO/IEC TR 11801-9908:2020 (E) which is a Technical Report, provides a listing of the data centre application options currently available or in process of standardization utilizing duplex and parallel optical fibre channels. It also identifies migration considerations when upgrading to higher speed applications.

ISO/IEC 60559:2020(E) specifies formats and methods for floating-point arithmetic in computer systems - standard and extended functions with single, double, extended, and extendable precision - and recommends formats for data interchange. Exception conditions are defined and standard handling of these conditions is specified. It provides a method for computation with floating-point numbers that will yield the same result whether the processing is done in hardware, software, or a combination of t...view more

IEC 62680-1-2:2019 defines a power delivery system covering all elements of a USB system including: Hosts, Devices, Hubs, Chargers and cable assemblies. This specification describes the architecture, protocols, power supply behavior, connectors and cabling necessary for managing power delivery over USB at up to 100W. This specification is intended to be fully compatible and extend the existing USB infrastructure. It is intended that this specification will allow system OEMs, power supply and per...view more

ISO/IEC TR 11801-9906:2020(E) covers channel specifications, for channels constructed from balanced 1 pair cabling components, primarily intended for use in industrial automation and process control applications. The channel specifications are consistent with corresponding IEEE 802.3 single-pair Ethernet (SPE) applications and are referenced from link segment specifications in the following IEEE SPE physical layer specifications: • ISO/IEC/IEEE 8802-3:2017/AMD4, 1 000 Mb/s: 1000BASE T1 Type A, =...view more

ISO/IEC 14543-5-102:2020(E) specifies the system architecture and communication protocols of remote universal management profile to achieve intelligent grouping, resource sharing and service collaboration among different devices and controllers. The protocol features are: a) remote universal device discovery and management framework that includes connection methods and network architecture, device configuration interfaces, management message formats and message exchange flows; b) request/respons...view more

The present document is based on requirements from ETSI TS 102 656 [2].
The present document contains handover requirements and a handover specification for the data that is identified in
national legislations on Retained Data.
The present document considers both the requesting of retained data and the delivery of the results.
The present document defines an electronic interface. An informative annex describes how this interface may be
adapted for manual techniques. Apart from in annex I, t...view more

ISO/IEC TR 11801-9906:2020(E) covers channel specifications, for channels constructed from balanced 1 pair cabling components, primarily intended for use in industrial automation and process control applications.
The channel specifications are consistent with corresponding IEEE 802.3 single-pair Ethernet (SPE) applications and are referenced from link segment specifications in the following IEEE SPE physical layer specifications:
• ISO/IEC/IEEE 8802-3:2017/AMD4, 1 000 Mb/s: 1000BASE T1 Type A,...view more

This standard describes a communication interface between a channel and I/O control units that utilize the Single-Byte Command Code Sets (SBCCS) as implemented in a wide range of data processing systems. It employs information formats and signaling protocols that provide a uniform means for communicating with various types of I/O control units, facilitating a high bandwidth, high performance, and long distance information exchange environment. The signaling protocols and information exchanges ar...view more

This standard defines PHY and MAC specifications for high data rate wireless connectivity (typically over 200 Mbps) with fixed, portable, and moving devices. Data rates are high enough to satisfy a set of consumer multimedia industry needs, as well as to support emerging wireless switched point-to-point and high rate close proximity point-to-point applications.

ISO/IEC 14763-2:2019 specifies requirements for the planning, installation and operation of telecommunications cabling and cabling infrastructures including cabling, pathways, spaces and telecommunications bonds (other than that specified in ISO/IEC 30129) in support of generic cabling standards and associated documents. The following aspects are addressed: a) specification of the installation; b) quality assurance; c) installation planning; d) installation practice; e) documentation; f) adminis...view more