This document: — provides risk management elaborations for the processes described in ISO/IEC/IEEE 15288 and ISO/IEC/IEEE 12207, — provides the users of ISO/IEC/IEEE 15288, ISO/IEC/IEEE 12207 and their associated elaboration standards with common terminology and specialized guidance for performing risk management within the context of systems and software engineering projects, — specifies the required information items that are to be produced through the implementation of risk management process...view more

    • sale 15% off
    • Standard
      47 pages
      English language
    • sale 15% off
    • Draft
      47 pages
      English language
    • sale 15% off
    • Draft
      50 pages
      English language

This document defines the capabilities of issue management tools and is used to select the most appropriate one from many issue management tools. The evaluation and selection of the issue management tools is performed in accordance with ISO/IEC 20741 which defines the general evaluation selection process and evaluation characteristics. Issue management is based on the tasks described in several activities in their processes (e.g. project assessment and control, decision management, and system/so...view more

    • sale 15% off
    • Draft
      36 pages
      English language
    • sale 15% off
    • Standard
      36 pages
      English language
    • sale 15% off
    • Draft
      33 pages
      English language

This document provides an introduction to AI-based systems. These systems are typically complex (e.g. deep neural nets), are sometimes based on big data, can be poorly specified and can be non-deterministic, which creates new challenges and opportunities for testing them. This document explains those characteristics which are specific to AI-based systems and explains the corresponding difficulties of specifying the acceptance criteria for such systems. This document presents the challenges of te...view more

    • sale 15% off
    • Draft
      52 pages
      English language
    • sale 15% off
    • Technical report
      52 pages
      English language

This document provides the mapping expressing corresponding relations between software life cycle processes in ISO/IEC/IEEE 12207:2017 and the processes in ISO/IEC 12207:2008. These relations are demonstrated by means of mapping tables that show relationships between activities and tasks, and process outcomes. This mapping assists users of ISO/IEC 12207:2008 to transition to using ISO/IEC/IEEE 12207:2017. This document will help users understand the differences between the reference processes an...view more

    • sale 15% off
    • Draft
      270 pages
      English language
    • sale 15% off
    • Standard
      267 pages
      English language

This document is a guideline for the application of ISO/IEC/IEEE 12207:2017. This document establishes guidance to implement a common framework for software life cycle processes, with well-defined terminology, that can be referenced by the software industry. This document provides guidance on defining, controlling, and improving software life cycle processes within an organization or a project. This document recommends methods and approaches suitable for a variety of life cycle models. The guida...view more

    • sale 15% off
    • Standard
      66 pages
      English language
    • sale 15% off
    • Draft
      69 pages
      English language

This document specifies the capabilities of a tool to support review work. The evaluation and selection of the review tools are performed in accordance with ISO/IEC 20741 which defines the general evaluation selection process and evaluation characteristics. This document defines capabilities specific to review tools in the process. By using these two standards together, it is possible to derive objective and reasonable results of the evaluation and selection of review tools. The review work is b...view more

    • sale 15% off
    • Standard
      31 pages
      English language
    • sale 15% off
    • Draft
      31 pages
      English language

This document specifies requirements for the vendors and gives guidelines for both the users and the developers of software safety and security verification tools. The users of such tools include, but are not limited to, bodies performing verification and software developers who need to be aware and pay attention to safety and/or security of software. This document guides the verification tool vendors to provide as high-quality products as possible and helps the users to understand the capabilit...view more

    • sale 15% off
    • Standard
      30 pages
      English language
    • sale 15% off
    • Standard
      30 pages
      English language

This document defines a process reference model for the domain of service management. The model specifies a process architecture for the domain and comprises a set of processes. Each process is described in terms of process purpose and outcomes. The process reference model in this document is directed at assessment sponsors and competent assessors who wish to select a model, and associated documented process method, for assessment (for either capability determination or process improvement).

    • sale 15% off
    • Technical specification
      73 pages
      English language
    • sale 15% off
    • Technical specification
      73 pages
      English language

This document: — defines a process assessment model that relies on the process reference model published as ISO/IEC TS 33054 that meets the requirements of ISO/IEC 33004 and that supports the performance of an assessment by providing indicators for guidance on the interpretation of the process purposes and outcomes and the process attributes as defined in ISO/IEC 33020; — provides guidance, by example, on the definition, selection and use of assessment indicators. A process assessment model comp...view more

    • sale 15% off
    • Technical specification
      273 pages
      English language
    • sale 15% off
    • Technical specification
      273 pages
      English language

This document defines the process assessment guidelines needed to meet the purpose of defined VSE profiles. It is applicable to all VSE profiles and is compatible with ISO/IEC 33002. The possible uses of this document are as follows. a) Assessment to evaluate the process capabilities. Use when an organization wants an assessment of profile conformance (basic, etc.) of the implemented processes. b) Supplier's capability assessment. Use when a customer asks for a third party to conduct an assessme...view more

    • sale 15% off
    • Technical report
      99 pages
      English language

This document defines a process assessment model for system life cycle processes, conformant with the requirements of ISO/IEC 33004, for use in performing a conformant assessment in accordance with the requirements of ISO/IEC 33002.

    • sale 15% off
    • Technical specification
      66 pages
      English language

This document defines requirements, guidelines, formats and approaches for use when producing a mapping document that defines how industry practices map to/from the ISO/IEC 19770 series. This edition is focused solely on mappings to/from both the second edition of ISO/IEC 19770-1 that was published in 2012, or the third edition of ISO/IEC 19770-1 that was published in 2017. However, the title of this document is deliberately more general as it is expected that future editions of this document al...view more

    • sale 15% off
    • Standard
      17 pages
      English language

1.1 Purpose This document is intended to aid project managers in managing to successful conclusion those projects concerned with systems, including software systems. This document specifies the required content of the project management plan (PMP). This document also quotes the extracted purpose and outcome statements from the technical management processes of ISO/IEC/IEEE 15288 and ISO/IEC/IEEE 12207, and adds detailed guidance for managing projects that use these processes for systems, includi...view more

    • sale 15% off
    • Standard
      29 pages
      English language

This document provides guidance on the application of processes in ISO/IEC/IEEE 15288 to systems of systems (SoS). The scope of this document is the same as ISO/IEC/IEEE 15288, which addresses more than systems engineering activities. NOTE 1 Throughout the document, there is mixed use of "system of systems" and "systems of systems". "SoS" could refer to a system of systems or systems of systems. Similarly, "CS" could refer to a constituent system or constituent systems. This document provides ge...view more

    • sale 15% off
    • Standard
      58 pages
      English language

This document defines a process reference model for the domain of quality management. The model specifies a process architecture for the domain and comprises a set of processes. Each process is described in terms of process purpose and outcomes. NOTE Users of this document can freely reproduce the detailed descriptions contained in this process reference model as part of any tool or other material to support the performance of process assessments, so that it can be used for its intended purpose.

    • sale 15% off
    • Technical specification
      57 pages
      English language

This document, within the context of methods and tools for supporting the transitioning the organization's current development approach to software and systems product line engineering: — defines processes for product line transition management. Those processes are described in terms of purpose, inputs, tasks and outcomes; — defines method capabilities to support the defined tasks of each process; — defines tool capabilities that automate or semi-automate tasks and methods. This document does no...view more

    • sale 15% off
    • Standard
      35 pages
      English language

This document, within the context of methods and tools for supporting the diagnosis of the organization's capability to adopt or improve software and systems product line engineering: — defines processes for product line technical probe; those processes are described in terms of purpose, inputs, tasks and outcomes; — defines method capabilities to support the defined tasks of each process; and — defines tool capabilities that automate or semi-automate tasks and methods. This document does not co...view more

    • sale 15% off
    • Standard
      39 pages
      English language

This document defines a process measurement framework that supports the assessment of process capability, in accordance with the requirements of ISO/IEC 33003. The process measurement framework provides a schema that can be used to construct a process assessment model conformant with ISO/IEC 33004 which can be used in the performance of assessment of process capability according to the requirements of ISO/IEC 33002. In the context of this document and related standards, process capability is a p...view more

    • sale 15% off
    • Standard
      42 pages
      English language

1.1 Fields of application This document provides management and engineering guidance within the Intermediate profile for the Business Management, Project Management, System Definition and Realisation and Acquisition Management processes. This document is applicable to Very Small Entities (VSEs). VSEs are enterprises, organisations, departments or projects having up to 25 people. The lifecycle processes described in the ISO/IEC 29110 series are not intended to preclude or discourage their use by ...view more

    • sale 15% off
    • Technical report
      92 pages
      English language

This document provides guidance on the relationship between ISO/IEC 16350:2015 and a commonly used application management framework, ASL. It can be used by any organization or person wishing to understand how ASL can be used with ISO/IEC 16350:2015, including: a) an internal or external application management organization that has demonstrated or intends to demonstrate conformity to the requirements specified in ISO/IEC 16350:2015 and is seeking guidance on the use of ASL to establish and improv...view more

    • sale 15% off
    • Technical report
      8 pages
      English language

This document provides the framework for quality requirements for systems, software products and data, which includes concept of the quality requirements, and requirements and recommendations for the processes and methods to elicit, define, use and govern them. Intended readers of this document include, but are not limited to: — acquirers: evaluate if the system/software products/data fulfills their value proposition, i.e., meets the expected quality, — developers: design, implement and test the...view more

    • sale 15% off
    • Standard
      46 pages
      English language

This document defines a Petri net modeling language or technique, called high-level Petri nets, including its syntax and semantics. It provides a reference definition that can be used both within and between organizations, to ensure a common understanding of the technique and of the specifications written using the technique. This document also facilitates the development and interoperability of Petri net computer support tools. This document is applicable to a wide variety of concurrent discret...view more

    • sale 15% off
    • Standard
      29 pages
      English language

This document provides guidance on the application of the results of a process assessment for process risk determination. The guidance provided does not presume specific organizational structures, management philosophies, life cycle models or development methods. In relation to process risk determination, this guidance is applicable within any customer?supplier relationship, and to any organization wishing to perform a process risk determination of its processes.

    • sale 15% off
    • Technical report
      34 pages
      English language

This document specifies the means to organize and record architecture evaluations for enterprise, systems and software fields of application. The aim of this document is to enable architecture evaluations that are used to: a) validate that architectures address the concerns of stakeholders; b) assess the quality of architectures with respect to their intended purpose; c) assess the value of architectures to their stakeholders; d) determine whether architecture entities address their intended pur...view more

    • sale 15% off
    • Standard
      77 pages
      English language

This document defines a normalized taxonomy for systems of systems (SoS) to facilitate communications among stakeholders. It also briefly explains what a taxonomy is and how it applies to the SoS to aid in understanding and communication.

    • sale 15% off
    • Standard
      8 pages
      English language

This document specifies the purpose and content of all identified systems and software life‐cycle and service management information items (documentation). The information item contents are defined according to generic document types, as presented in Clause 7, and the specific purpose of the document, as presented in Clause 10. This document assumes an organization is performing life‐cycle processes, or delivering system or software engineering services, using either or both of the following: — ...view more

    • sale 15% off
    • Standard
      73 pages
      English language

1.1 Purpose This document provides a set of critical system of systems (SoS) considerations to be addressed at key points in the life cycle of the system of interest (SoI). This document refers to considerations that apply to an SoI that is a constituent system that interacts in an SoS. The considerations and life cycle model align with those which are already defined in ISO/IEC/IEEE 15288 and ISO/IEC/IEEE 24748-1. Selected subsets of these considerations can be applied throughout the life of sy...view more

    • sale 15% off
    • Standard
      31 pages
      English language

This document establishes a set of process descriptions for the governance and management of a collection of architectures and the architecting of entities. This document also establishes an enablement process description that provides support to these other architecture processes. The processes defined in this document are applicable for a single project, as well as for an organization performing multiple projects. These processes are applicable throughout the life of an architecture or a colle...view more

    • sale 15% off
    • Standard
      110 pages
      English language

This document provides a framework for developing quality measurement. The contents of this document are as follows: — quality measurement reference model; — relationships among different types of quality measures; — guidelines for selecting quality measures; — guidelines for constructing quality measures; — guidelines for planning and performing measurements; — guidelines for the application of measurement results. It includes considerations for selecting quality measures and quality measure el...view more

    • sale 15% off
    • Standard
      27 pages
      English language

This document provides general and specific guidance for the competency of assessors performing assessments in accordance with the ISO/IEC 330xx family of standards.

    • sale 15% off
    • Technical report
      5 pages
      English language

This document provides a framework and consistent terminology for specifying user requirements. It specifies the common industry format (CIF) for a user requirement specification including the content elements and the format for stating those requirements. NOTE 1 A user requirements specification is the formal documentation of a set of user requirements, which aids in the development and evaluation of usable interactive systems. In this document, user requirements refers to: a) user-system inter...view more

    • sale 15% off
    • Standard
      21 pages
      French language
    • sale 15% off
    • Standard
      20 pages
      English language

This document, within the context of methods and tools for product line product management: — defines product line-specific processes and their subprocesses for product management of software and systems product lines. Those processes are described in terms of purpose, inputs, tasks and outcomes; — defines method capabilities to support the defined tasks of each process; — defines tool capabilities to automate/semi-automate tasks or defined method capabilities. This document does not concern pro...view more

    • sale 15% off
    • Standard
      48 pages
      English language

This document, within the context of methods and tools for architecture design for software and systems product lines: — defines processes and their subprocesses performed during domain and application architecture design. Those processes are described in terms of purpose, inputs, tasks and outcomes; — defines method capabilities to support the defined tasks of each process; — defines tool capabilities to automate/semi-automate tasks or defined method capabilities. This document does not concern...view more

    • sale 15% off
    • Standard
      61 pages
      English language

This document is part one of the ISO/IEC 24773 series. It contains the requirements which will be common to all other parts of the ISO/IEC 24773 series, for certifications (schemes and bodies) in the domain of software and systems engineering.

    • sale 15% off
    • Standard
      11 pages
      English language

This document defines assurance-related terms and establishes an organized set of concepts and relationships to form a basis for shared understanding across user communities for assurance. It provides information to users of the other parts of ISO/IEC/IEEE 15026 including the combined use of multiple parts. The essential concept introduced by ISO/IEC/IEEE 15026 (all parts) is the statement of claims in an assurance case and the support of those claims through argumentation and evidence. These cl...view more

    • sale 15% off
    • Standard
      27 pages
      English language

This document establishes the requirements for systems engineering activities to be performed on projects of the United States (US) Department of Defense (DoD) and other defense agencies across the entire system life cycle, including the planning, acquisition, modification, and sustainment of defense systems. It provides the foundation for systems engineering within the context of ISO/IEC/IEEE 152881 and the acquisition environment of DoD and other defense agencies at all levels of system hierar...view more

    • sale 15% off
    • Standard
      51 pages
      English language

This recommended practice describes a set of useful quality considerations that can be selected and applied during one or more steps in a software acquisition process. The recommended practices can be applied to software that runs on any computer system regardless of the size, complexity, or criticality of the software. The software supply chain may include integration of commercial-off-the-shelf (COTS), custom, or free and open source software (FOSS). Each organization or individual using this ...view more

    • sale 15% off
    • Standard
      56 pages
      English language

This document establishes the requirements for technical reviews and audits to be performed throughout the acquisition life cycle for the US Department of Defense (DoD) and other defense agencies. This document provides the definition, description, and intent, as well as the entry, exit and success criteria, for each technical review and audit. It is to be used to establish agreement between acquirers and suppliers on the technical reviews and audits that are needed for the project, as well as t...view more

    • sale 15% off
    • Standard
      154 pages
      English language

This document supports the interest of information developers and associated roles responsible for producing information for users of software and systems developed within an agile environment. This document takes a process standard approach to specify the way in which information for users can be developed in agile development projects. This document provides requirements of information management and information development processes appropriate for software projects that are using agile devel...view more

    • sale 15% off
    • Standard
      22 pages
      English language

This document is a guideline for the application of ISO/IEC/IEEE 15288:2015. It addresses system, life cycle, organizational, project, and process, concept application, principally through reference to ISO/IEC/IEEE 24748‑1 and ISO/IEC/IEEE 15288:2015. It gives guidance on applying ISO/IEC/IEEE 15288:2015 from the aspects of strategy, planning, application in organizations, and application on projects. It also provides comparison of the differences between ISO/IEC/IEEE 15288:2015 and the prior ve...view more

    • sale 15% off
    • Standard
      64 pages
      English language

This document supports the needs of users for consistent, complete, accurate, and usable information. It provides requirements for strategy, planning, managing, staffing, translation, production, and quality and process-maturity assessment for managers of information for users. It specifies processes and procedures for managing information for users throughout the product- or systems-development life cycle. It also includes requirements for key documents produced for managing information for use...view more

    • sale 15% off
    • Standard
      77 pages
      English language

This document provides guidance for organizations in the application of ISO 9001:2015 to the acquisition, supply, development, operation and maintenance of computer software and related support services. It does not add to or otherwise change the requirements of ISO 9001:2015. Annex A provides a table pointing to additional guidance on the implementation of ISO 9001:2015, available in ISO/IEC JTC 1/SC 7, ISO/IEC JTC 1/SC 27 and ISO/TC 176 International Standards. The guidelines provided in this ...view more

    • sale 15% off
    • Standard
      69 pages
      English language

This document: — specifies the required processes implemented in the engineering activities that result in requirements for systems and software products (including services) throughout the life cycle; — provides guidelines for applying the requirements and requirements-related processes described in ISO/IEC/IEEE 15288 and ISO/IEC/IEEE 12207; — specifies the required information items produced through the implementation of the requirements processes; — specifies the required contents of the requ...view more

    • sale 15% off
    • Standard
      92 pages
      English language

This document, within the methods and tools of testing for software and systems product lines: — provides the terms and definitions specific to testing for software and systems product lines; — defines processes performed during product line testing (those processes are described in terms of purpose, inputs, tasks and outcomes); — defines method capabilities to support the defined tasks of each process; and — defines tool capabilities to automate/semi-automate tasks or defined method capabilitie...view more

    • sale 15% off
    • Standard
      55 pages
      English language

This document, within the methods and tools of organizational management for software and systems product lines: — enables the users of this document to holistically understand, adopt and enact the processes, tools and methods for product line organizational management; — helps the users evaluate and select relevant tools and methods based on business and user-related criteria; — helps make product line engineers, developers and tool vendors informed about capabilities of tools and methods that ...view more

    • sale 15% off
    • Standard
      65 pages
      English language

This document, within the context of tools and methods of detailed design and implementation for software and system product lines: — provides the terms and definitions specific to realization for software and systems product lines; — defines processes performed during product line realization (those processes are described in terms of purpose, inputs, tasks and outcomes); — defines method capabilities to support the defined tasks of each process; and — defines tool capabilities to automate/semi...view more

    • sale 15% off
    • Standard
      61 pages
      English language

This document provides guidelines for the life cycle management of systems and software, complementing the processes described in ISO/IEC/IEEE 15288 and ISO/IEC/IEEE 12207. This document: — addresses systems concepts and life cycle concepts, models, stages, processes, process application, key points of view, adaptation and use in various domains and by various disciplines; — establishes a common framework for describing life cycles, including their individual stages, for the management of projec...view more

    • sale 15% off
    • Standard
      72 pages
      English language

This document is applicable to Very Small Entities (VSEs). A VSE is an enterprise, an organization, a department or a project having up to 25 people. The purpose of this document is to provide a set of auditable requirements based on multiple standards (i.e., ISO/IEC/IEEE 15288, ISO/IEC/IEEE 15289, ISO 9000, ISO 9001, ISO 31000, ISO/IEC 38500, ISO 10004, ISO 10007, ISO/IEC 20000, ISO/IEC 27035) that supports the delivery of services by a VSE. Services can be delivered to internal or external cus...view more

    • sale 15% off
    • Standard
      67 pages
      English language

This document supports the interest of system users in having consistent, complete, accurate, and usable information. It addresses both available approaches to standardization: a) process standards, which specify the way that information products are to be acquired and supplied; and b) information product standards, which specify the characteristics and functional requirements of the information. As defined in ISO/IEC/IEEE 12207 and ISO/IEC/IEEE 15288:2015, the acquisition and supply activities ...view more

    • sale 15% off
    • Standard
      37 pages
      English language

This document is applicable to Very Small Entities (VSEs). VSEs are enterprises, organisations, departments or projects having up to 25 people. The life cycle processes described in the set of International Standards (IS) and Technical Reports (TR) are not intended to preclude or discourage their use by organisations bigger than VSEs. The Advanced profile is the fourth profile of a four-profile software engineering roadmap (i.e. Entry, Basic, Intermediate and Advanced). This document describes p...view more

    • sale 15% off
    • Technical report
      95 pages
      English language