SIST EN 15016-1:2023
(Main)Railway applications - Technical documents - Part 1: General principles
Railway applications - Technical documents - Part 1: General principles
This document lays down requirements for the preparation, administration and reproduction of technical drawings for railway applications. It complies with the requirements of EN, ISO or IEC Standards for technical drawings. It applies to technical drawings for railways, irrespective of technology i.e. mechanical, pneumatic, hydraulic, electronic etc.
The document applies throughout the total life span of the drawings. It applies to all the railway organizations and parties concerned with technical drawings, and to suppliers preparing drawings for railway applications. This document does not apply to the technical contents of the document. Neither does the standard apply to building documentation.
Bahnanwendungen - Technische Dokumente - Teil 1: Allgemeine Grundsätze
Dieses Dokument legt die Anforderungen für die Anfertigung, Verwaltung und Reproduktion von technischen Zeichnungen für Bahnanwendungen fest. Sie steht in Übereinstimmung mit den Anforderungen von EN , ISO- bzw. IEC-Normen für technische Zeichnungen und gilt für technische Zeichnungen für Bahnanwendungen unabhängig von der angewandten, d. h. mechanischen, pneumatischen, hydraulischen, elektronischen oder sonstigen Technik.
Dieses Dokument gilt für die gesamte Nutzungsdauer der Zeichnungen und betrifft alle Bahnorganisationen und beteiligten Kreise, die mit technischen Zeichnungen befasst sind, sowie Zulieferer, die Zeichnungen für Bahnanwendungen anfertigen. Dieses Dokument gilt nicht für den technischen Inhalt der Dokumente und nicht für Dokumente von baulichen Anlagen.
Applications ferroviaires - Documents techniques - Partie 1 : Principes généraux
Le présent document définit les exigences d'exécution, de gestion et de reproduction des dessins techniques destinés à des applications ferroviaires. Elle se conforme aux exigences des normes EN, ISO ou IEC relatives aux dessins techniques. Elle s'applique aux dessins techniques pour le ferroviaire, indépendamment de la technologie employée, qu'elle soit mécanique, pneumatique, hydraulique, électronique, etc.
Le présent document s'applique pendant toute la durée de validité des dessins. Il s'applique à toutes les organisations ferroviaires et à toutes les parties concernées par les dessins techniques, ainsi qu'aux fournisseurs qui exécutent les dessins pour les applications ferroviaires. Le présent document ne s'applique pas aux contenus techniques du document. Il ne s'applique pas non plus à la documentation du bâtiment.
Železniške naprave - Tehnična dokumentacija - 1. del: Osnovna načela
Ta dokument določa zahteve za pripravo, uporabo in razmnoževanje tehničnih risb za železniške naprave. Upošteva zahteve standardov EN, ISO ali IEC za tehnične risbe. Uporablja se za tehnične risbe za železnice, ne glede na tehnologijo, tj. mehansko, pnevmatsko, hidravlično, elektronsko itd.
Dokument se uporablja vso življenjsko dobo risb. Uporablja se za vse železniške organizacije in stranke, ki se ukvarjajo s tehničnimi risbami, ter za dobavitelje, ki pripravljajo risbe za železniške naprave. Ta dokument se ne uporablja za tehnično vsebino dokumenta. Prav tako se standard ne uporablja za gradbeno dokumentacijo.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 15016-1:2023
01-oktober-2023
Železniške naprave - Tehnična dokumentacija - 1. del: Osnovna načela
Railway applications - Technical documents - Part 1: General principles
Bahnanwendungen - Technische Dokumente - Teil 1: Allgemeine Grundsätze
Applications ferroviaires - Documents techniques - Partie 1 : Principes généraux
Ta slovenski standard je istoveten z: EN 15016-1:2023
ICS:
01.110 Tehnična dokumentacija za Technical product
izdelke documentation
45.020 Železniška tehnika na Railway engineering in
splošno general
SIST EN 15016-1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 15016-1:2023
---------------------- Page: 2 ----------------------
SIST EN 15016-1:2023
EN 15016-1
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2023
EUROPÄISCHE NORM
ICS 01.100.01; 45.020 Supersedes EN 15016-1:2004
English Version
Railway applications - Technical documents - Part 1:
General principles
Applications ferroviaires - Documents techniques - Bahnanwendungen - Technische Dokumente - Teil 1:
Partie 1 : Principes généraux Allgemeine Grundsätze
This European Standard was approved by CEN on 9 July 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15016-1:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 15016-1:2023
EN 15016-1:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Symbols and abbreviated terms . 6
5 Preparation of drawings . 6
5.1 Layout . 6
5.1.1 Composition . 6
5.1.2 Special cases . 6
5.1.3 Applications . 6
5.1.4 Multiple sheets . 6
5.1.5 Avoiding duplicate indications . 7
5.2 Cha
...
SLOVENSKI STANDARD
oSIST prEN 15016-1:2022
01-junij-2022
Železniške naprave - Tehnična dokumentacija - 1. del: Osnovna načela
Railway applications - Technical documents - Part 1: General principles
Bahnanwendungen - Technische Dokumente - Teil 1: Allgemeine Grundsätze
Applications ferroviaires - Documents techniques - Partie 1 : Principes généraux
Ta slovenski standard je istoveten z: prEN 15016-1
ICS:
01.110 Tehnična dokumentacija za Technical product
izdelke documentation
45.020 Železniška tehnika na Railway engineering in
splošno general
oSIST prEN 15016-1:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 15016-1:2022
---------------------- Page: 2 ----------------------
oSIST prEN 15016-1:2022
DRAFT
EUROPEAN STANDARD
prEN 15016-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2022
ICS 01.100.01; 45.020 Will supersede EN 15016-1:2004
English Version
Railway applications - Technical documents - Part 1:
General principles
Applications ferroviaires - Documents techniques - Bahnanwendungen - Technische Dokumente - Teil 1:
Partie 1 : Principes généraux Allgemeine Grundsätze
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15016-1:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 15016-1:2022
prEN 15016-1:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Symbols and abbreviated terms . 6
5 Preparation of drawings . 6
5.1 Layout . 6
5.1.1 Composition . 6
5.1.2 Special cases . 6
5.1.3 Applications .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.