oSIST prEN ISO 15098:2023

SLOVENSKI STANDARD
oSIST prEN ISO 15098:2023
01-julij-2023
Zobozdravstvo - Dentalne pincete (ISO/DIS 15098:2023)
Dentistry - Dental tweezers (ISO/DIS 15098:2023)
Zahnheilkunde - Dentalpinzetten (ISO/DIS 15098:2023)
Médecine bucco-dentaire Précelles dentaires (ISO/DIS 15098:2023)
Ta slovenski standard je istoveten z: prEN ISO 15098
ICS:
11.060.20 Zobotehnična oprema Dental equipment
oSIST prEN ISO 15098:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 15098:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 15098:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 15098
ISO/TC 106/SC 4 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-05-08 2023-07-31
Dentistry — Dental tweezers
Médecine bucco-dentaire — Précelles dentaires
ICS: 11.060.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 15098:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 15098:2023
ISO/DIS 15098:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 15098
ISO/TC 106/SC 4 Secretariat: DIN
Voting begins on: Voting terminates on:

Dentistry — Dental tweezers
Médecine bucco-dentaire — Précelles dentaires
ICS: 11.060.20
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 15098:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 15098:2023
ISO/DIS 15098:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 2
5 Requirements . 2
5.1 Design and dimensions . 2
5.1.1 Length . 3
5.1.2 Working end . 7
5.1.3 Handle . 7
5.1.4 Guide pin . 7
5.2 Material . 7
5.3 Hardness (of working end) . 7
5.4 Surface finish . 7
5.4.1 All surfaces . 7
5.4.2 Satin finish . 8
5.5 Closing and opening forces . 8
5.6 Resistance to reprocessing . 8
6 Measurement and test methods .8
6.1 Visual inspection . 8
6.2 Dimensions . 8
6.3 Closing and opening forces . 8
6.4 Resistance to reprocessing . 9
7 Marking, labelling and instructions for use . 9
7.1 Marking on the dental tweezers . 9
7.2 Labelling on the package . 10
7.3 Instructions for use . 10
Bibliography .11
iii
© ISO 2023 – All rights reserved

---------------------- Page: 5 ----------------------
oSIST prEN ISO 15098:2023
ISO/DIS 15098:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 106, Dentistry, Subcommittee SC 4, Dental
instruments.
This second edition of ISO 15098 cancels and replaces ISO 15098:2020. The main changes are the
following:
— Replacing “?” with “12” in Table 1.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
  © ISO 2023 – All rights reserved

---------------------- Page: 6 ----------------------
oSIST prEN ISO 15098:2023
DRAFT INTERNATIONAL STANDARD ISO/DIS 15098:2023(E)
Dentistry — Dental tweezers
1 Scope
This document specifies general requirements and test methods for metallic dental tweezers of the
Meriam type and for College type.
This document is not applicable to anatomical tweezers and surgical tweezers.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited app
...