ISO 4484-2:2023
(Main)Textiles and textile products — Microplastics from textile sources — Part 2: Qualitative and quantitative analysis of microplastics
Textiles and textile products — Microplastics from textile sources — Part 2: Qualitative and quantitative analysis of microplastics
This document establishes a qualitative-quantitative analytical evaluation (i.e. determination) of microplastics to be able to define their: — particle number; — morphology (morphological characteristics); — dimensional distribution; — the type, chemical origin or nature of polymers and their colour, if present. This document is applicable to the determination of microplastics (from the textile sector) collected in various matrices (for example textile process wastewater, clothes washing water, textile process air emissions, textile process solid waste). This document specifies expression of results in terms of estimated surface area and mass of microplastics (MPs) per unit sample. It enables the expression of the results of the quantification of microplastics (MPs) from various sources, including samples related to the production, processing, treatment and use of textiles (raw material, manufacturing process, sample like wastewater from washing clothes, air, and industrial process water). This document applies to textile sector samples of matrices of different physical states (solid, liquid or aeriform), for example: — solid samples from textile production processes; — water samples from the textile production process and/or from the washing of clothing (e.g. garments or other textiles, ISO 4484-1 or ISO 4484-3 can be applied in order to prepare a liquid to be tested); — air samples to test the air quality in the workplace of textile companies. This document, being able to provide information such as size, shape, surface and mass (estimated), enables the transfer of useful information for ecotoxicological assessments to specialists.
Textiles et produits textiles — Microplastiques d'origines textiles — Partie 2: Analyse qualitative et quantitative des microplastiques
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 4484-2
First edition
2023-09
Textiles and textile products —
Microplastics from textile sources —
Part 2:
Qualitative and quantitative analysis
of microplastics
Textiles et produits textiles — Microplastiques d'origines textiles —
Partie 2: Analyse qualitative et quantitative des microplastiques
Reference number
ISO 4484-2:2023(E)
© ISO 2023
---------------------- Page: 1 ----------------------
ISO 4484-2:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2023 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 4484-2:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Principle . 3
5 Reagents . 4
6 Apparatus . 5
7 Cleaning procedure .7
7.1 Cleaning of the materials and the test environment . 7
7.2 Blank test to evaluate environmental contamination . 8
7.3 Cleaning procedure for filters . 8
8 Sample preparation .9
8.1 Solid matrices (fibre, textile or any derivates) . 9
8.2 Liquid matrices (aqueous) . 9
8.3 Air matrices . 9
8.4 Preliminary checking of sample and pre-treatment. 10
8.4.1 Liquid sample property checking and requirements . 10
8.4.2 Pre-treatment if required . . 10
8.4.3 Test sample homogeniz
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.