ISO 20035:2019
(Main)Intelligent transport systems — Cooperative adaptive cruise control systems (CACC) — Performance requirements and test procedures
Intelligent transport systems — Cooperative adaptive cruise control systems (CACC) — Performance requirements and test procedures
Cooperative Adaptive Cruise Control (CACC) system is an expansion to existing Adaptive Cruise Control (ACC) control strategy by using wireless communication with preceding vehicles (V2V) and/or the infrastructure (I2V). Both multi vehicle V2V data and I2V infrastructure data are within the scope of this document. When V2V data is used CACC can enable shorter time gaps and more accurate gap control, which can help increase traffic throughput and reduce fuel consumption. It can also receive data from the infrastructure, such as recommended speed and time gap setting, to improve traffic flow and safety. This document addresses two types of Cooperative Adaptive Cruise Control (CACC): V2V, and I2V. Both types of CACC system require active sensing using for example radar, lidar, or camera systems. The combined V2V and I2V CACC is not addressed in this document. The following requirements are addressed in this document: — classification of the types of CACC; — definition of the performance requirements for each CACC type; — CACC state transitions diagram; — minimum set of wireless data requirements; — test procedures. CACC: — does only longitudinal vehicle speed control; — uses time gap control strategy similar to ACC; — has similar engagement criteria as ACC. Coordinated strategies to control groups of vehicles, such as platooning, in which vehicle controllers base their control actions on how they affect other vehicles, and may have a very short following clearance gap are not within the scope of this document. CACC system operates under driver responsibility and supervision. This document is applicable to motor vehicles including light vehicles and heavy vehicles.
Systèmes de transport intelligents — Systèmes coopératifs et adaptatifs de régulation de vitesse (CACC) — Exigences de performance et procédures d'essai
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 20035
First edition
2019-01
Intelligent transport systems —
Cooperative adaptive cruise control
systems (CACC) — Performance
requirements and test procedures
Reference number
ISO 20035:2019(E)
©
ISO 2019
---------------------- Page: 1 ----------------------
ISO 20035:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 20035:2019(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Symbols and abbreviated terms . 3
5 Classification . 4
5.1 Type of CACC systems . 4
5.2 Curve capabilities . 4
5.3 Classes of on-board V2X devices . 4
6 Requirements . 5
6.1 V2V CACC . 5
6.1.1 V2V CACC response . 5
6.1.2 Region of interest . 5
6.1.3 Potential Vehicle of Interest (PVOI) . 5
6.1.4 State transition diagram . 6
6.1.5 Control operation strategy . 7
6.1.6 V2V CACC data requirements . 9
6.2 I2V CACC .10
6.2.1 Control Operation Strategy .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.