EN 60068-2-60:2015
(Main)Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test
Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test
IEC 60068-2-60:2015 is available as IEC 60068-2-60:2015 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 60068-2-60:2015 determines the corrosive influence of operating and storage indoor environments on electrotechnical products components, equipment and materials, particularly contacts and connections, considered separately, integrated into a subassembly or assembled as a complete equipment. This third edition cancels and replaces the second edition, published in 1995, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - updated IEC format; - updated normative references list; - addition of information of the working volume; - revision of the test procedure; - revision of the figures in Annex B.
Umgebungseinflüsse - Teil 2-60: Prüfungen - Prüfung Ke: Korrosionsprüfung mit strömendem Mischgas
Essais d'environnement - Partie 2-60: Essais - Essai Ke: Essai de corrosion dans un flux de mélange de gaz
L'IEC 60068-2-60:2015 est disponible sous forme de IEC 60068-2-60:2015 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente. L'IEC 60068-2-60:2015 établit l'influence corrosive de l'environnement sur des composants de produits électrotechniques, des équipements et des matériels, en fonctionnement ou stockés à l'intérieur de bâtiments, en particulier sur des contacts et des connexions, pris individuellement, intégrés dans un sous-ensemble ou faisant partie d'un équipement complet. Cette troisième édition annule et remplace la deuxième édition publiée en 1995. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - mise à jour du format de l'IEC; - mise à jour de la liste de références normatives; - ajout d'informations concernant le volume de travail; - révision de la procédure d'essai; - révision des figures dans l'Annexe B.
Okoljsko preskušanje - 2-60. del: Preskusi - Preskus Ke: Preskus korozije z zmesjo tekočih plinov
Ta del standarda IEC 60068-2 določa vpliv korozije v zaprtih prostorih, namenjenih izvajanju del in shranjevanju, na sestavne dele elektrotehniških izdelkov, opreme in materiala, zlasti na stike in priključke, ki se obravnavajo ločeno, integrirane v podsklop ali sestavljene v popolno opremo.
Zagotavlja preskusne metode, ki podajajo primerjalne informacije za pomoč pri izbiri materialov, proizvodnih postopkov in načrtovanja sestavnih delov glede na odpornost na korozijo. Vodnik izbirnih metod in trajanja preskusov je na voljo v dodatku C.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60068-2-60:2016
01-marec-2016
1DGRPHãþD
SIST EN 60068-2-60:2001
2NROMVNRSUHVNXãDQMHGHO 3UHVNXVL3UHVNXV.H 3UHVNXVNRUR]LMH]]PHVMR
WHNRþLKSOLQRY
Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test
Ta slovenski standard je istoveten z: EN 60068-2-60:2015
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
SIST EN 60068-2-60:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60068-2-60:2016
---------------------- Page: 2 ----------------------
SIST EN 60068-2-60:2016
EUROPEAN STANDARD EN 60068-2-60
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2015
ICS 19.040 Supersedes EN 60068-2-60:1996
English Version
Environmental testing - Part 2-60: Tests - Test Ke: Flowing
mixed gas corrosion test
(IEC 60068-2-60:2015)
Essais d'environnement - Partie 2-60: Essais - Essai Ke: Umweltprüfungen - Teil 2-60: Prüfungen - Prüfung Ke:
Essai de corrosion dans un flux de mélange de gaz Korrosionsprüfung mit strömendem Mischgas
(IEC 60068-2-60:2015) (IEC 60068-2-60:2015)
This European Standard was approved by CENELEC on 2015-07-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60068-2-60:2015 E
---------------------- Page: 3 ----------------------
SIST EN 60068-2-60:2016
EN 60068-2-60:2015 (E)
European foreword
The text of document 104/655/FDIS, future edition 3 of IEC 60068-2-60, prepared by IEC/TC 104
"Environmental conditions, classification and methods of test" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 60068-2-60:2015.
The following dates are fixed:
(dop) 2016-06-11
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2018-07-23
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60068-2-60:2015 was approved by CENELEC as a
European Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN 60068-2-60:2016
EN 60068-2-60:2015 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60512-2-1 - Connectors for electronic equipment - EN 60512-2-1 -
Tests and measurements -- Part 2-1:
Electrical continuity and contact resistance
tests - Test 2a: Contact resistance -
Millivolt level method
IEC 60512-3-1 - Connectors for electronic equipment - EN 60512-3-1 -
Te
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.