EN ISO 2692:2006
(Main)Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2006)
Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2006)
ISO 2692:2006 defines the maximum material requirement, the least material requirement and the reciprocity requirement, and specifies their applications.
These requirements are used to control specific functions of workpieces where size and geometry are interdependent, e.g. to fulfil the functions assembly of parts (for maximum material requirement) and minimum wall thickness (for least material requirement). However, the maximum material requirement and least material requirement are also used to fulfil other functional design requirements.
Geometrische Produktspezifikation (GPS) - Form- und Lagetolerierung - Maximum-Material-Bedingung (MMR), Minimum-Material-Bedingung (LMR) und Reziprozitätsbedingung (RPR) (ISO 2692:2006)
Diese Internationale Norm definiert die Maximum-Material-Bedingung, die Minimum-Material-Bedingung und die Reziprozitätsbedingung und legt ihre Anwendungen fest.
Diese Anforderungen dienen zur Steuerung bestimmter Funktionen von Werkstücken, bei denen eine Abhängigkeit von Maß und Geometrie vorhanden ist, z. B. zur Erfüllung der Funktionen zusammengebauter Teile (für die Maximum-Material-Bedingung) und zur Erfüllung der Funktion Mindest-Wandstärke (für Minimum-Material-Bedingung). Die Maximum-Material-Bedingung und die Minimum-Material-Bedingung werden jedoch auch zur Erfüllung anderer funktionaler Anforderungen genutzt.
Spécification géométrique des produits (GPS) - Tolérancement géométrique - Exigence du maximum de matière (MMR), exigence du minimum de matière (LMR) et exigence de réciprocité (RPR) (ISO 2692:2006)
L'ISO 2692:2006 définit l'exigence du maximum de matière, l'exigence du minimum de matière et l'exigence de réciprocité, et en précise les applications.
L'objectif de ces exigences est de contrôler les fonctions spécifiques de pièces où la taille et la géométrie sont interdépendantes, afin d'assurer, par exemple, l'assemblage des pièces (dans le cas de l'exigence du maximum de matière) et une épaisseur de paroi minimale (dans le cas de l'exigence du minimum de matière). Cependant, l'exigence du maximum de matière et l'exigence du minimum de matière peuvent être employées pour respecter d'autres exigences fonctionnelles de conception.
Specifikacija geometrijskih veličin izdelka – Toleriranje geometrijskih veličin – Zahteva po maksimalnem materialu, zahteva po minimalnem materialu in zahteva po materialni usklajenosti (ISO 2692:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 2692:2007
01-april-2007
6SHFLILNDFLMDJHRPHWULMVNLKYHOLþLQL]GHOND±7ROHULUDQMHJHRPHWULMVNLKYHOLþLQ±
=DKWHYDSRPDNVLPDOQHPPDWHULDOX]DKWHYDSRPLQLPDOQHPPDWHULDOXLQ]DKWHYD
SRPDWHULDOQLXVNODMHQRVWL ,62
Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material
requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
(ISO 2692:2006)
Geometrische Produktspezifikation (GPS) - Form- und Lagetolerierung - Maximum-
Material-Bedingung (MMR), Minimum-Material-Bedingung (LMR) und
Reziprozitätsbedingung (RPR) (ISO 2692:2006)
Spécification géométrique des produits (GPS) - Tolérancement géométrique - Exigence
du maximum de matiere (MMR), exigence du minimum de matiere (LMR) et exigence de
réciprocité (RPR) (ISO 2692:2006)
Ta slovenski standard je istoveten z: EN ISO 2692:2006
ICS:
01.100.20 Konstrukcijske risbe Mechanical engineering
drawings
SIST EN ISO 2692:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN ISO 2692
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2006
ICS 01.100.20
English Version
Geometrical product specifications (GPS) - Geometrical
tolerancing - Maximum material requirement (MMR), least
material requirement (LMR) and reciprocity requirement (RPR)
(ISO 2692:2006)
Spécification géométrique des produits (GPS) - Geometrische Produktspezifikation (GPS) - Form- und
Tolérancement géométrique - Exigence du maximum de Lagetolerierung - Maximum-Material-Bedingung (MMR),
matière (MMR), exigence du minimum de matière (LMR) et Minimum-Material-Bedingung (LMR) und
exigence de réciprocité (ISO 2692:2006) Reziprozitätsbedingung (RPR) (ISO 2692:2006)
This European Standard was approved by CEN on 25 November 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2692:2006: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN ISO 2692:2006 (E)
Foreword
This document (EN ISO 2692:2006) has been prepared by Technical Committee ISO/TC 213
"Dimensional and geometrical product specifications and verification" in collaboration with
Technical Committee CEN/TC 290 "Dimensional and geometrical product specification and
verification", the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by June 2007, and conflicting national
standards shall be withdrawn at the latest by June 2007.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 2692:2006 has been approved by CEN as EN ISO 2692:2006 without any
modifications.
2
---------------------- Page: 3 ----------------------
INTERNATIONAL ISO
STANDARD 2692
Second edition
2006-12-15
Geometrical product specifications
(GPS) — Geometrical tolerancing —
Maximum material requirement (MMR),
least material requirement (LMR) and
reciprocity requirement (RPR)
Spécification géométrique des produits (GPS) — Tolérancement
géométrique — Exigence du maximum de matière (MMR), exigence du
minimum de matière (LMR) et exigence de réciprocité (RPR)
Reference number
ISO 2692:2006(E)
©
ISO 2006
---------------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.