25.040.30 - Industrial robots. Manipulators
Industrial robots. Manipulators
Industrieroboter. Handhabungsgerate
Robots industriels. Manipulateurs
Industrijski roboti. Manipulatorji
General Information
This document describes methods that can be used to test personal care robots in terms of safety requirements defined in ISO 13482. The target robots of this document are identical to those of ISO 13482. The manufacturer determines the required tests and appropriate testing parameters based on a risk assessment of the robot's design and usage. This risk assessment can determine that tests and test parameters other than those contained in this document are acceptable. Not all test methods are app...view more
- Technical report79 pagesEnglish language
sale 15% off
This document describes methods of specifying and evaluating the navigation performance of mobile service robots. Navigation performance in this document is measured by pose accuracy and repeatability, as well as the ability to detect and avoid obstacles. Other measures of navigation performance are available but are not covered in this document. The criteria and related test methods are applicable only to mobile platforms that are in contact with the travel surface. For evaluating the character...view more
- Standard17 pagesEnglish language
sale 15% off
This document provides guidance on the use of ISO 13482 and is intended to facilitate the design of personal care robots in conformity with ISO 13482. Additional guidance is provided for users with limited experience of risk assessment and risk reduction. This document provides clarification and guidance on new terms and safety requirements introduced to allow close human-robot interaction and human-robot contact in personal care robot applications, including mobile servant robots, physical assi...view more
- Technical report55 pagesEnglish language
sale 15% off
This document provides guidance on safety measures for the design and integration of end-effectors used for robot systems. The integration includes the following: — the manufacturing, design and integration of end-effectors; — the necessary information for use. This document provides additional safety guidance on the integration of robot systems, as described in ISO 10218‑2:2011.
- Technical report25 pagesEnglish language
sale 15% off
ISO/TR 20218-2:2017 is applicable to robot systems for manual load/unload applications in which a hazard zone is safeguarded by preventing access to it. For this type of application, it is important to consider the need for both access restrictions to hazard zones and for ergonomically suitable work places. ISO/TR 20218-2:2017 supplements ISO 10218-2:2011 and provides additional information and guidance on reducing the risk of intrusion into the hazard zones in the design and safeguarding of man...view more
- Technical report14 pagesEnglish language
sale 15% off
ISO 19649:2017 defines terms relating to mobile robots that travel on a solid surface and that operate in both industrial robot and service robot applications. It defines terms used for describing mobility, locomotion and other topics relating to the navigation of mobile robots.
- Standard10 pagesFrench language
sale 15% off- Standard10 pagesEnglish language
sale 15% off
ISO 18646-1:2016 describes methods for specifying and evaluating the locomotion performance of wheeled robots in indoor environments.
- Standard13 pagesFrench language
sale 15% off- Standard13 pagesFrench language
sale 15% off- Standard13 pagesEnglish language
sale 15% off
ISO/TS 15066:2016 specifies safety requirements for collaborative industrial robot systems and the work environment, and supplements the requirements and guidance on collaborative industrial robot operation given in ISO 10218‑1 and ISO 10218‑2. ISO/TS 15066:2016 applies to industrial robot systems as described in ISO 10218‑1 and ISO 10218‑2. It does not apply to non-industrial robots, although the safety principles presented can be useful to other areas of robotics. NOTE This Technical Specifica...view more
- Technical specification33 pagesEnglish language
sale 15% off
EN ISO 13482 specifies requirements and guidelines for the inherently safe design, protective measures, and information for use of personal care robots, in particular the following three types of personal care robots: - mobile servant robot; - physical assistant robot; - person carrier robot. These robots typically perform tasks to improve the quality of life of intended users, irrespective of age or capability. This International Standard describes hazards associated with the use of these robot...view more
- Standard89 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 13482:2014 specifies requirements and guidelines for the inherently safe design, protective measures, and information for use of personal care robots, in particular the following three types of personal care robots:
mobile servant robot;
physical assistant robot;
person carrier robot.
These robots typically perform tasks to improve the quality of life of intended users, irrespective of age or capability. ISO 13482:2014 describes hazards associated with the use of these robots, and pro...view more
- Standard89 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 13482:2014 specifies requirements and guidelines for the inherently safe design, protective measures, and information for use of personal care robots, in particular the following three types of personal care robots: mobile servant robot; physical assistant robot; person carrier robot. These robots typically perform tasks to improve the quality of life of intended users, irrespective of age or capability. ISO 13482:2014 describes hazards associated with the use of these robots, and provides r...view more
- Standard79 pagesEnglish language
sale 15% off- Standard93 pagesFrench language
sale 15% off
ISO 9787:2013 defines and specifies robot coordinate systems. It also provides nomenclature, including notations, for the basic robot motions. It is intended to aid in robot alignment, testing, and programming. ISO 9787:2013 applies to all robots and robotic devices as defined in ISO 8373.
- Standard12 pagesFrench language
sale 15% off- Standard12 pagesEnglish language
sale 15% off
This part of ISO 10218 specifies requirements and guidelines for the inherent safe design, protective measures and information for use of industrial robots. It describes basic hazards associated with robots and provides requirements to eliminate, or adequately reduce, the risks associated with these hazards. This part of ISO 10218 does not address the robot as a complete machine. Noise emission is generally not considered a significant hazard of the robot alone, and consequently noise is exclude...view more
- Standard52 pagesEnglish language
sale 10% off- e-Library read for1 day
This part of ISO 10218 specifies safety requirements for the integration of industrial robots and industrial robot systems as defined in ISO 10218-1, and industrial robot cell(s). The integration includes the following: a) the design, manufacturing, installation, operation, maintenance and decommissioning of the industrial robot system or cell; b) necessary information for the design, manufacturing, installation, operation, maintenance and decommissioning of the industrial robot system or cell; ...view more
- Standard82 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 10218-2:2011 specifies safety requirements for the integration of industrial robots and industrial robot systems as defined in ISO 10218-1, and industrial robot cell(s). The integration includes the following: the design, manufacturing, installation, operation, maintenance and decommissioning of the industrial robot system or cell; necessary information for the design, manufacturing, installation, operation, maintenance and decommissioning of the industrial robot system or cell; component de...view more
- Standard79 pagesFrench language
sale 15% off- Standard72 pagesEnglish language
sale 15% off
ISO 10218-1:2011 specifies requirements and guidelines for the inherent safe design, protective measures and information for use of industrial robots. It describes basic hazards associated with robots and provides requirements to eliminate, or adequately reduce, the risks associated with these hazards.
ISO 10218-1:2011 does not address the robot as a complete machine. Noise emission is generally not considered a significant hazard of the robot alone, and consequently noise is excluded from the ...view more
- Standard52 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 10218-2:2011 specifies safety requirements for the integration of industrial robots and industrial robot systems as defined in ISO 10218-1, and industrial robot cell(s). The integration includes the following:
the design, manufacturing, installation, operation, maintenance and decommissioning of the industrial robot system or cell;
necessary information for the design, manufacturing, installation, operation, maintenance and decommissioning of the industrial robot system or cell;
compone...view more
- Standard82 pagesEnglish language
sale 10% off- e-Library read for1 day
ISO 10218-1:2011 specifies requirements and guidelines for the inherent safe design, protective measures and information for use of industrial robots. It describes basic hazards associated with robots and provides requirements to eliminate, or adequately reduce, the risks associated with these hazards. ISO 10218-1:2011 does not address the robot as a complete machine. Noise emission is generally not considered a significant hazard of the robot alone, and consequently noise is excluded from the s...view more
- Standard45 pagesFrench language
sale 15% off- Standard43 pagesEnglish language
sale 15% off
IEC 60204-33:2009 applies to electrical and electronic equipment associated with semiconductor fabrication equipment for the manufacture, measurement, assembly, and test of semiconductors. It is applicable to the electrical equipment or parts of the electrical equipment that operate with nominal supply voltages not exceeding 1 000 V for alternating current (a.c.) and not exceeding 1 500 V for direct current (d.c.), and with nominal supply frequencies not exceeding 200 Hz. For higher voltages or ...view more
- Standard129 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC 60204-33:2009 applies to electrical and electronic equipment associated with semiconductor fabrication equipment for the manufacture, measurement, assembly, and test of semiconductors. It is applicable to the electrical equipment or parts of the electrical equipment that operate with nominal supply voltages not exceeding 1 000 V for alternating current (a.c.) and not exceeding 1 500 V for direct current (d.c.), and with nominal supply frequencies not exceeding 200 Hz. For higher voltages or ...view more
- Standard247 pagesEnglish and French language
sale 15% off