Aerospace series - Heat resisting nickel base alloy Ni Cr20Co3Fe3 - Rm ≥ 650 MPa - Sheets and strips, cold rolled - 0,25 mm < a ≤ 3 mm

This document specifies the requirements relating to:
Heat resisting nickel base alloy Ni Cr20Co3Fe3
Rm ≥ 650 MPa
Sheets and strips, cold rolled
0,25 mm < a ≤ 3 mm
for aerospace applications.

Luft- und Raumfahrt - Hochwarmfeste Nickellegierung Ni Cr20Co3Fe3 - Rm ≥ 650 MPa - Bleche und Bänder, kaltgewalzt - 0,25 mm < a ≤ 3 mm

Dieses Dokument legt die Anforderungen an:
Hochwarmfeste Nickellegierung NiCr20Co3Fe3
Rm ≥ 650 MPa
Bleche und Bänder, kaltgewalzt
0,25 mm < a ≤ 3 mm
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Alliage résistant à chaud à base de nickel Ni Cr20Co3Fe3 - Rm ≥ 650 MPa - Tôles et bandes, laminées à froid - 0,25 mm < a ≤ 3 mm

Le présent document spécifie les exigences relatives à :
Alliage résistant à chaud base nickel NiCr20Co3Fe3
Rm ≥ 650 MPa
Tôles et bandes, laminées à froid
0,25 mm < a ≤ 3 mm
pour les applications aérospatiales.

Aeronavtika - Toplotnoodporne zlitine na nikljevi osnovi Ni Cr20Co3Fe3 - Rm ≥ 650 MPa - Pločevina in trakovi, hladno valjani - 0,25 mm < a ≤ 3 mm

General Information

Status
Not Published
Public Enquiry End Date
14-Sep-2022
Technical Committee
Current Stage
5020 - Formal vote (FV) (Adopted Project)
Start Date
09-May-2023
Due Date
27-Jun-2023
Completion Date
15-May-2023

Buy Standard

Draft
prEN 2302:2022
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 2302:2022
01-september-2022
Aeronavtika - Toplotnoodporne zlitine na nikljevi osnovi Ni Cr20Co3Fe3 - Rm ≥ 650
MPa - Pločevina in trakovi, hladno valjani - 0,25 mm < a ≤ 3 mm
Aerospace series - Heat resisting nickel base alloy Ni Cr20Co3Fe3 - Rm ≥ 650 MPa -
Sheets and strips, cold rolled - 0,25 mm < a ≤ 3 mm
Luft- und Raumfahrt - Hochwarmfeste Nickellegierung Ni Cr20Co3Fe3 - Rm ≥ 650 MPa -
Bleche und Bänder, kaltgewalzt - 0,25 mm < a ≤ 3 mm
Série aérospatiale - Alliage résistant à chaud à base de nickel Ni Cr20Co3Fe3 - Rm ≥
650 MPa - Tôles et bandes, laminées à froid - 0,25 mm < a ≤ 3 mm
Ta slovenski standard je istoveten z: prEN 2302
ICS:
49.025.15 Neželezove zlitine na Non-ferrous alloys in general
splošno
77.120.40 Nikelj, krom in njune zlitine Nickel, chromium and their
alloys
oSIST prEN 2302:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 2302:2022

---------------------- Page: 2 ----------------------
oSIST prEN 2302:2022


DRAFT
EUROPEAN STANDARD
prEN 2302
NORME EUROPÉENNE

EUROPÄISCHE NORM

June 2022
ICS
English Version

Aerospace series - Heat resisting nickel base alloy Ni-
Cr20Co3Fe3 - Rm  650 MPa - Sheets and strips, cold
rolled - 0,25 mm < a  3 mm
Série aérospatiale - Alliage résistant à chaud à base de Luft- und Raumfahrt - Hochwarmfeste Nickellegierung
nickel Ni Cr20Co3Fe3 - Rm  650 MPa - Tôles et Ni Cr20Co3Fe3 - Rm  650 MPa - Bleche und Bänder,
bandes, laminées à froid - 0,25 mm < a  3 mm kaltgewalzt - 0,25 mm < a  3 mm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 2302:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 2302:2022
prEN 2302:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 8

2

---------------------- Page: 4 ----------------------
oSIST prEN 2302:2022
prEN 2302:2022 (E)
European foreword
This document (prEN 2302:2022) has been prepared by the Aerospace and Defence Industries
Associatio
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.