SIST EN ISO 11296-4:2018/A1:2021

SLOVENSKI STANDARD
SIST EN ISO 11296-4:2018/A1:2021
01-julij-2021
Cevni sistemi iz polimernih materialov za obnovo podzemnih omrežij za
odvodnjavanje in kanalizacijo za obratovanje brez tlaka (vodi s prosto gladino) - 4.
del: Oblaganje s cevmi, utrjenimi na mestu vgradnje - Dopolnilo A1: Posodobljene
definicije, zahteve za označevanje in alternativno navajanje rezultatov upogibnega
preskusa (ISO 11296-4:2018/Amd 1:2021)
Plastics piping systems for renovation of underground non-pressure drainage and
sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated
definitions, marking requirements and procedure for alternative expression of flexural
test results (ISO 11296-4:2018/Amd 1:2021)
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten drucklosen
Entwässerungsnetzen (Freispiegelleitungen) - Teil 4: Vor Ort härtendes Schlauch-Lining
- Änderung 1: Aktualisierung von Begriffen, Anforderungen an Kennzeichnungen und
Verfahren für die alternative Angabe von Ergebnissen des Biegeversuchs (ISO 11296-
4:2018/Amd 1:2021)
Ta slovenski standard je istoveten z: EN ISO 11296-4:2018/A1:2021
ICS:
23.040.05 Cevovodi za zunanje Pipeline and its parts for
sisteme za odpadno vodo in external sewage systems
njihovi deli
91.140.80 Drenažni sistemi Drainage systems
93.030 Zunanji sistemi za odpadno External sewage systems
vodo
SIST EN ISO 11296-4:2018/A1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 11296-4:2018/A1:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 11296-4:2018/A1:2021


EN ISO 11296-4:2018/A1
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2021
EUROPÄISCHE NORM
ICS 23.040.20; 23.040.45; 91.140.80; 93.030
English Version

Plastics piping systems for renovation of underground
non-pressure drainage and sewerage networks - Part 4:
Lining with cured-in-place pipes - Amendment 1: Updated
definitions, marking requirements and procedure for
alternative expression of flexural test results (ISO 11296-
4:2018/Amd 1:2021)
Systèmes de canalisations en plastique pour la Kunststoff-Rohrleitungssysteme für die Renovierung
rénovation des réseaux de branchements et de von erdverlegten drucklosen Entwässerungsnetzen
collecteurs d'assainissement enterrés sans pression - (Freispiegelleitungen) - Teil 4: Vor Ort härtendes
Partie 4: Tubage continu par tubes polymérisés sur Schlauch-Lining - Änderung 1: Aktualisierung von
place - Amendement 1: Actualisation des définitions, Begriffen, Anforderungen an Kennzeichnungen und
des exigences de marquage, et de la procédure pour Verfahren für die alternative Angabe von Ergebnissen
une autre expression des propriétés de flexion (ISO des Biegeversuchs (ISO 11296-4:2018/Amd 1:2021)
11296-4:2018/Amd 1:2021)
This amendment A1 modifies the European Standard EN ISO 11296-4:2018; it was approved by CEN on 24 December 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11296-4:2018/A1:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 11296-4:2018/A1:2021
EN ISO 11296-4:2018/A1:2021 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 11296-4:2018/A1:2021
EN ISO 11296-4:2018/A1:2021 (E)
European foreword
This document (EN ISO 11296-4:2018/A1:2021) has been prepared by Technical Committee ISO/TC
138 "Plastics pipes, fittings and valves for the transport of fluids" in collaboration with Technical
Committee CEN/TC 155 “Plastics piping systems and ducting systems” the secretariat of which is held
by NEN.
This Amendment to the European Standard EN ISO 11296-4:2018 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by November 2021,
and conflicting national standards shall be withdrawn at the latest by November 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 11296-4:2018/Amd 1:2021 has been approved by CEN as EN ISO 11296-
4:2018/A1:2021 without any modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 11296-4:2018/A1:2021

---------------------- Page: 6 ----------------------
SIST EN ISO 11296-4:2018/A1:2021
INTERNATIONAL ISO
STANDARD 11296-4
Second edition
2018-02
AMENDMENT 1
2021-02
Plastics piping systems for renovation
of underground non-pressure
drainage and sewerage networks —
Part 4:
Lining with cured-in-place pipes
AMENDMENT 1: Updated definitions,
marking requirements and procedure
for alternative expression of flexural
test results
Systèmes de canalisations en plastique pour la rénovation des réseaux
de branchements et de collecteurs d'assainissement enterrés sans
pression —
Partie 4: Tubage continu par tubes polymérisés sur place
AMENDEMENT 1: Actualisation des définitions, des exigences
de marquage, et de la procédure pour une autre expression des
propriétés de flexion
Reference number
ISO 11296-4:2018/Amd.1:2021(E)
©
ISO 2021

---------------------- Page: 7 ----------------------
SIST EN ISO 11296-4:2018/A1:2021
ISO 11296-4:2018/Amd.1:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 11296-4:2018/A1:2021
ISO 11296-4:2018/Amd.1:2021(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 138, Plastics pipes, fittings and valves
for the transport of fluids, Subcommittee SC 8, Rehabilitation of pipeline systems, in collaboration with
the European Committee for Standardization (CEN) Technical Committee CEN/TC 155, Plastics piping
systems and ducting systems, in accordance with the Agreement on technical cooperation between ISO
and CEN (Vienna Agreement).
A list of all parts in the ISO 11296 series can be found on the ISO website.
Any feedback or questions on th
...