oSIST prEN 14601:2023
(Main)Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe
Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe
This document is applicable to manually operated end cocks designed to cut-off the brake pipe and the main reservoir pipe of the air brake and compressed air system of rail vehicles, without taking the type of vehicles and track-gauge into consideration.
This document specifies requirements for the design, dimensions, testing and certification (qualification and/or homologation), and marking.
Bahnanwendungen - Gerade und abgewinkelte Luftabsperrhähne für die Hauptluftleitung und Hauptbehälterleitung
Dieses Dokument ist anwendbar für manuell bediente Luftabsperrhähne an den Enden der Hauptluft- und der Hauptbehälterleitung im Druckluft(brems )system von Schienenfahrzeugen, ohne Berücksichtigung der Bauart der Fahrzeuge und der Spurweite.
Dieses Dokument legt Anforderungen hinsichtlich der Gestaltung, der Abmessungen, der Prüfung und der Zertifizierung (Qualifizierung und/oder Typprüfung) und der Kennzeichnung fest.
Applications ferroviaires - Robinets d'arrêt droit ou coudé pour conduite générale de frein et conduite principale
Le présent document est applicable aux robinets d’arrêt manœuvrables manuellement, conçus pour interrompre la conduite générale et la conduite principale des systèmes de freinage par air comprimé des véhicules ferroviaires, sans considération du type des véhicules et de gabarit de la voie.
Le présent document donne les exigences à respecter pour la conception, les dimensions, les essais, la certification (qualification et / ou essai de type), et le marquage.
Železniške naprave - Ravne in kotne zaporne pipe za zavorne in glavne zračne vode
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 14601:2023
01-april-2023
Železniške naprave - Ravne in kotne zaporne pipe za zavorne in glavne zračne
vode
Railway applications - Straight and angled end cocks for brake pipe and main reservoir
pipe
Bahnanwendungen - Gerade und abgewinkelte Luftabsperrhähne für die Hauptluftleitung
und Hauptbehälterleitung
Applications ferroviaires - Robinets d'arrêt droit ou coudé pour conduite générale de frein
et conduite principale
Ta slovenski standard je istoveten z: prEN 14601
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
oSIST prEN 14601:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 14601:2023
---------------------- Page: 2 ----------------------
oSIST prEN 14601:2023
DRAFT
EUROPEAN STANDARD
prEN 14601
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2023
ICS 45.060.01 Will supersede EN 14601:2005+A2:2021
English Version
Railway applications - Straight and angled end cocks for
brake pipe and main reservoir pipe
Applications ferroviaires - Robinets d'arrêt droit ou Bahnanwendungen - Gerade und abgewinkelte
coudé pour conduite générale de frein et conduite Luftabsperrhähne für die Hauptluftleitung und
principale Hauptbehälterleitung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14601:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 14601:2023
prEN 14601:2023 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 10
4.1 Operating conditions . 10
4.2 Functional characteristics . 11
4.2.1 General. 11
4.2.2 Open and closed positions . 11
4.2.3 Lubrication . 11
4.2.4 Venting port .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.