iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST-TP CEN/TR 17996:2024

(Main)

Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Guidelines for Pipelines Installation

Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Guidelines for Pipelines Installation

This European Standard is a complementary document for the installation of ductile iron pipes, fittings, accessories and their joints, covered by EN 598:2009 harmonized standard. It is intended to describe, in a wider perspective, installation technologies, tools and pipelines particular examples, applicable for the construction, outside buildings, of:
-   Drainage pipeline systems;
-   Raw water pipeline systems;
-   Sewage pipeline systems;
-   Pipeline systems conveying surface water (e.g. rainwater), domestic waste water and/or certain types of industrial effluents, either in separate systems or in combined systems;
-   Operating without pressure (gravity sewers) or with positive or negative pressure;
-   Below or above ground installation types.
It also gives some site operation/site instructions for the application of fittings, intended to be used for the connection of ductile iron drains and sewers to other materials as plastic, concrete, vitrified clay, etc.
This European Standard is not intended to cover:
-   Hydraulic design of drains and sewers systems outside buildings. For this purpose, EN 16933-2 applies.
-   Construction and site testing of drains and sewers. For this purpose, EN 1610 applies.
-   Trenchless construction and testing of drains and sewers. For this purpose, EN 12889:2000 applies

Rohre, Formstücke, Zubehörteile aus duktilem Gusseisen und ihre Verbindungen für Wasserleitungen - Richtlinien für die Installation von Rohrleitungen

Cevi, fitingi, pribor in spoji iz duktilne železove litine za kanalizacijo - Smernice za vgradnjo cevovodov

Ta evropski standard je dopolnilni dokument za nameščanje cevi, fitingov, pribora in spojev iz duktilne železove litine, ki so zajeti v usklajeni standard EN 598:2009. Namenjen je širšemu opisu tehnologij nameščanja, orodja in določenih primerov cevovodov, ki se uporabljajo za gradnjo, zunanje stavbe:
– drenažni cevovodni sistemi;
– cevovodni sistemi za neobdelano vodo;
– komunalni cevovodni sistemi;
– cevovodni sistemi za odvod površinske vode (npr. padavinske vode), odpadne vode iz gospodinjstev in/ali določenih vrst industrijskih odplak, v ločene ali združene sisteme;
– delovanje brez tlaka (gravitacijska kanalizacija) ali z nadtlakom ali podtlakom;
– za podzemno ali nadzemno nameščanje.
Prav tako podaja nekaj navodil za upravljanje delovišča v zvezi z uporabo fitingov, ki so namenjeni za povezovanje odvodov in kanalizacije iz duktilne železove litine z drugimi materiali, kot so plastika, beton, keramika itd.
Ta evropski standard ne zajema:
– hidravlične zasnove sistemov odvodov odpadne vode in kanalizacije zunaj stavb. Za ta namen se uporablja standard EN 16933- 2.
– gradnje in preskušanja odvodov odpadne vode in kanalizacije na mestu samem. Za ta namen se uporablja standard EN 1610.
– Izvedbe in preskušanja odvodov odpadne vode in kanalizacije brez izkopa. Za ta namen se uporablja standard EN 12889:2000.

General Information

Status
Published
Public Enquiry End Date
01-Jan-2024
Publication Date
15-Apr-2024
ICS
23.040.10 - Iron and steel pipes
23.040.40 - Metal fittings
Technical Committee
TLP - Pressure vessels
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
12-Mar-2024
Due Date
17-May-2024
Completion Date
16-Apr-2024
Ref Project
CEN/TR 17996:2024 - Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Guidelines for Pipelines Installation

Buy Standard

TP CEN/TR 17996:2024 - BARVETP CEN/TR 17996:2024 - BARVE
PreviousNext
Technical report
TP CEN/TR 17996:2024 - BARVE
English language
56 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
kTP FprCEN/TR 17996:2023 - BARVEkTP FprCEN/TR 17996:2023 - BARVE
PreviousNext
Draft
kTP FprCEN/TR 17996:2023 - BARVE
English language
56 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN/TR 17996:2024
01-maj-2024
Cevi, fitingi, pribor in spoji iz duktilne železove litine za kanalizacijo - Smernice za
vgradnjo cevovodov
Ductile iron pipes, fittings, accessories and their joints for sewerage applications -
Guidelines for Pipelines Installation
Rohre, Formstücke, Zubehörteile aus duktilem Gusseisen und ihre Verbindungen für
Wasserleitungen - Richtlinien für die Installation von Rohrleitungen
Ta slovenski standard je istoveten z: CEN/TR 17996:2024
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
23.040.40 Kovinski fitingi Metal fittings
SIST-TP CEN/TR 17996:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TP CEN/TR 17996:2024

---------------------- Page: 2 ----------------------
SIST-TP CEN/TR 17996:2024


CEN/TR 17996
TECHNICAL REPORT

RAPPORT TECHNIQUE

February 2024
TECHNISCHER REPORT
ICS 23.040.10; 23.040.40
English Version

Ductile iron pipes, fittings, accessories and their joints for
sewerage applications - Guidelines for Pipelines
Installation
 Rohre, Formstücke, Zubehörteile aus duktilem
Gusseisen und ihre Verbindungen für Wasserleitungen
- Richtlinien für die Installation von Rohrleitungen


This Technical Report was approved by CEN on 12 February 2024. It has been drawn up by the Technical Committee CEN/TC
203.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 17996:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST-TP CEN/TR 17996:2024
CEN/TR 17996:2024 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Assembling methods for pipes and fittings . 12
4.1 General. 12
4.2 Crowbar method . 12
4.3 Rope winches/Lever hoists method . 13
4.4 Devices with lever/Jointing tackle method . 15
4.5 Trench excavator method . 16
5 Laying in trench . 16
5.1 General. 16
5.2 Safety rules . 17
5.3 Laying in the presence of excavation shoring . 18
5.3.1 Obligations . 18
5.3.2 Deployment . 18
5.4 Laying on instable soils (low bearing capacity soils) .
...

SLOVENSKI STANDARD
kSIST-TP FprCEN/TR 17996:2023
01-december-2023
Cevi, fitingi, pribor in spoji iz duktilne železove litine za kanalizacijo - Smernice za
vgradnjo cevovodov
Ductile iron pipes, fittings, accessories and their joints for sewerage applications -
Guidelines for Pipelines Installation
Rohre, Formstücke, Zubehörteile aus duktilem Gusseisen und ihre Verbindungen für
Wasserleitungen - Richtlinien für die Installation von Rohrleitungen
Ta slovenski standard je istoveten z: FprCEN/TR 17996
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
kSIST-TP FprCEN/TR 17996:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST-TP FprCEN/TR 17996:2023

---------------------- Page: 2 ----------------------
kSIST-TP FprCEN/TR 17996:2023


FINAL DRAFT
TECHNICAL REPORT
FprCEN/TR 17996
RAPPORT TECHNIQUE

TECHNISCHER REPORT

June 2023
ICS
English Version

Ductile iron pipes, fittings, accessories and their joints for
sewerage applications - Guidelines for Pipelines
Installation
 Rohre, Formstücke, Zubehörteile aus duktilem
Gusseisen und ihre Verbindungen für Wasserleitungen
- Richtlinien für die Installation von Rohrleitungen


This draft Technical Report is submitted to CEN members for Vote. It has been drawn up by the Technical Committee CEN/TC
203.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a Technical Report. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a Technical Report.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TR 17996:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
kSIST-TP FprCEN/TR 17996:2023
FprCEN/TR 17996:2023 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Assembling methods for pipes and fittings . 12
4.1 General. 12
4.2 Crowbar method . 12
4.3 Rope winches/Lever hoists method . 13
4.4 Devices with lever/Jointing tackle method . 15
4.5 Trench excavator method . 16
5 Laying in trench . 16
5.1 General. 16
5.2 Safety rules . 17
5.3 Laying in the presence of excavation shoring . 18
5.3.1 Obligations .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 877:2022(Main)
Cast iron pipe systems and their components for the evacuation of water from works - Characteristics and test methods
EN 877:2021

This document specifies product characteristics, test/assessment methods and of how to express test/assessment results. Cast iron pipelines kits are usually composed by cast iron pipes, fittings, joints and accessories.
This document covers the range of nominal diameter from DN /40 to DN 600 inclusive.
The cast iron includes grey cast iron and ductile cast iron.
The roof gullies used for siphonic systems are outside the scope of this standard.
Sewerage applications are outside the scope of this standard.
It is intended to be used for the construction of gravity or vacuum discharge pressurized or unpressurised networks installed inside and/or outside Works, above and/or below ground, in construction works.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15655-2:2021(Main)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 2: Thermoplastic Modified Polyolefin (TMPO) lining of pipes
EN 15655-2:2020

This European Standard defines the requirements and test methods for thermoplastic modified polyolefin (TMPO) lining of pipes and fittings.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14628-1:2020(Main)
Ductile iron pipes, fittings and accessories - Requirements and test methods - Part 1: PE coatings
EN 14628-1:2020

This European Standard defines the requirements and test methods applicable to factory applied extruded polyethylene coatings for the external corrosion protection of ductile iron pipes conforming to EN 545, EN 598 and EN 969 for use at operating temperatures up to 50 °C.
This European Standard does not cover ductile iron pipes protected with thin PE sleeve. Special works at site like drilling, tapping etc. may influence the corrosion protection properties. Those job steps shall be included in the instructions of pipe saddle and accessory manufacturers and all other essential installation instructions. These instructions are not part of this European Standard.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14901-1:2014+A1:2020(Main)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1: Epoxy coating (heavy duty)
EN 14901-1:2014+A1:2019

This European Standard defines the requirements and test methods for factory applied epoxy coatings (fusion bonded powder or liquid two-pack) used for the corrosion protection of ductile iron fittings and accessories conforming to EN 545, EN 598, EN 969, EN 12842, EN 14525, for:
-   conveying water (e.g. potable water) at operating temperature up to 50 °C excluding frost; or
-   conveying waste water at operating temperature up to 45 °C excluding frost; or
-   conveying gas at operating temperature up to 50 °C;
-   suitable for external environments, i.e. soils, waters and atmospheres of all common corrosion loads, characterized in EN 545:2010, D.2.3.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14901-2:2020(Main)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 2: Thermoplastic acid modified polyolefin coating (TMPO)
EN 14901-2:2019

To allow ductile iron pipe manufacturers and users of the product to apply TMPO linings and thereby comply with the relevant requirements of EN 545, EN 545, EN 969. This demonstrates innovation according to Annex I, by the use of non-traditional coating systems offering environmental and economic benefits. The TMPO linings meet the criteria expressed in EN 14901, except for those pertinent to fusion bonded epoxy chemistry. The linings are being used in other parts of the world eg Australia and New Zealand and have been incorporated in the recent AWWA C116/A21.16-15 publication. The current status for TMPO linings in EU amounts to a barrier to trade and does not support SME’s involved in the manufacture, lining and application of the material that offers human health benefits, as highlighted in the Annex I and II.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15655-1:2019(Main)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 1: Polyurethane lining of pipes and fittings
EN 15655-1:2018

This European Standard defines the requirements and test methods applicable to factory applied internal polyurethane high duty corrosion protection of buried ductile iron pipes and fittings conforming to EN 545, EN 598 and EN 969 for use at permanent operating temperatures up to 45 °C

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 545:2011(Main)
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
EN 545:2010

This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of pipelines outside buildings: - to convey different types of water (e.g. raw water, treated water, re-used water) for all types of applications (e.g. water intended for human consumption, for fire protection, for snow making, for irrigation, for hydro-electricity etc.); - with or without pressure; - to be installed below or above ground. This European Standard is applicable to pipes, fittings and accessories which are: - manufactured with socketed, flanged or spigot ends; - supplied externally and internally coated; - suitable for fluid temperatures between 0 °C and 50 °C, excluding frost; - not intended for use in areas subject to reaction to fire regulations. This does not preclude special arrangements for the products to be used at higher temperatures. This European Standard covers pipes and fittings cast by any type of foundry process or manufactured by fabrication of cast components, as well as corresponding joints and accessories, in a size range extending from DN 40 to DN 2 000, inclusive. This European Standard specifies requirements for materials, dimensions and tolerances, mechanical properties and standard coatings of ductile iron pipes and fittings. It also gives performance requirements for all components including joints. Joint design and gasket shapes are outside the scope of this standard. In addition, reference is made to the minimum performance requirements of couplings, flange adaptors and saddles manufactured for use with ductile iron pipes and fittings.

  • Standard
    93 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard + National Annex and/or Foreword
    96 pages
    Foreword and/or annex in Slovenian language, body of the standard in English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 16017:2010(Main)
Guide to the use of EN 598
CEN/TR 16017:2010

EN 598 specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of drains and sewers outside buildings:
- operating without pressure (gravity sewerage), or with positive or negative pressure;
- to be installed below or above ground;
- to convey surface water, domestic waste water and certain types of industrial effluents, either in separate systems or in combined systems.
This technical report:
- explains in more detail the process of testing for the performance tests;
- explains in more detail the benefits of high alumina cement lining;
- explains in more detail the definitions of the different types/levels of attestation to enable customers to ensure their requirements are fulfilled;
- explains in more detail the ways of certification of conformity with EN 598 for a reliable evaluation of the performance of products;
- explains in more detail CE marking and its relevance i.e. the CE mark is not a mark of conformity with a standard but only a self-declaration concerning the CPD essential requirements.
In order to make the use of this Technical Report easier, the clauses of this document refer to the
corresponding clause numbers in EN 598.

  • Technical report
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 598:2008+A1:2009(Main)
Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods
EN 598:2007+A1:2009

This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of drains and sewers outside buildings:
-   operating without pressure (gravity sewerage), or with positive or negative pressure (see Table 5);
-   to be installed below or above ground;
-   to convey surface water, domestic waste water and certain types of industrial effluents, either in separate systems or in combined systems.
This European Standard applies to pipes, fittings and accessories which are:
-   manufactured with socketed, flanged or spigot ends;
-   normally delivered externally and internally coated;
-   suitable for continuous fluid temperatures between 0 °C excluding frost, and 45 °C for DN - 200 or 35 °C for
DN - 200, according to EN 476;
-   not intended for use in areas subject to reaction to fire regulations.
NOTE 1   This does not preclude special arrangements for the products to be used at higher temperatures.
This European Standard covers pipes, fittings and accessories cast by any type of foundry process or manufactured by fabrication of cast components, as well as corresponding joints, of a size range extending from DN 80 to DN 2000 inclusive.
This European Standard specifies requirements for materials, dimensions and tolerances, mechanical properties and standard coatings of ductile iron pipes and fittings. It also gives performance requirements for all components including joints. Joint design and gasket shapes are outside the scope of this European Standard.
NOTE 2   In this European Standard, all pressures are relative pressures, expressed in bars (100 kPa = 1 bar).

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15542:2008
Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods
EN 15542:2008

Specification of an external coating made from fiber reinforced cement, to be applied to ductile iron pipes intended for underground use in contact with corrosive soils

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day