iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 4266-2:2023

(Main)

Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 2: Measurement of level in marine vessels

Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 2: Measurement of level in marine vessels

This document gives guidance on the accuracy, installation, calibration and verification of automatic level gauges (ALGs), both intrusive and non-intrusive, for measuring the level of petroleum and liquid petroleum products having a Reid vapour pressure less than 100 kPa, transported aboard marine vessels (i.e. tankers and barges). This document gives guidance for buyers and sellers who mutually agree to use marine ALGs for either fiscal and/or custody transfer applications. This document is not applicable to the measurement of level in refrigerated cargo tanks. NOTE For information on the measurement of level in refrigerated cargo tanks, please see ISO 18132-1 and ISO 18132-3.

Pétrole et produits pétroliers liquides — Mesurage du niveau et de la température dans les réservoirs de stockage par des méthodes automatiques — Partie 2: Mesurage du niveau dans les citernes de navire

L'ISO 4266-2 constitue un guide relatif à la précision, à l'installation, à l'étalonnage et à la vérification des jaugeurs automatiques de mesure de niveau, qu'ils soient intrusifs ou non intrusifs. Ils sont utilisés pour le mesurage du niveau de pétrole et de produits pétroliers dont la tension de vapeur est inférieure à 100 kPa et qui sont transportés à bord de navires ( pétroliers et barges). L'ISO 4266-2 constitue un guide pour les acheteurs et les vendeurs qui ont passé un accord mutuel relatif à l'utilisation de jaugeurs de niveau d'application marine à des fins de transactions commerciales ou fiscales. L'ISO 4266-2 ne s'applique pas au mesurage de niveau à bord de navires à réservoirs réfrigérés.

General Information

Status
Published
Publication Date
29-Nov-2023
ICS
75.180.30 - Volumetric equipment and measurements
Technical Committee
ISO/TC 28/SC 2 - Measurement of petroleum and related products
Drafting Committee
ISO/TC 28/SC 2 - Measurement of petroleum and related products
Current Stage
6060 - International Standard published
Start Date
30-Nov-2023
Due Date
10-Aug-2025
Completion Date
30-Nov-2023
Ref Project

Relations

Revises
ISO 4266-2:2002 - Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 2: Measurement of level in marine vessels
Effective Date
13-Aug-2022

Buy Standard

ISO 4266-2:2023 - Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 2: Measurement of level in marine vessels Released:30. 11. 2023ISO 4266-2:2023 - Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 2: Measurement of level in marine vessels Released:30. 11. 2023
PreviousNext
Standard
ISO 4266-2:2023 - Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 2: Measurement of level in marine vessels Released:30. 11. 2023
English language
12 pages
sale 15% off
Preview
sale 15% off
Preview
ISO/PRF 4266-2 - Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 2: Measurement of level in marine vessels Released:5. 10. 2023ISO/PRF 4266-2 - Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 2: Measurement of level in marine vessels Released:5. 10. 2023
PreviousNext
Draft
ISO/PRF 4266-2 - Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 2: Measurement of level in marine vessels Released:5. 10. 2023
English language
12 pages
sale 15% off
Preview
sale 15% off
Preview
REDLINE ISO/PRF 4266-2 - Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 2: Measurement of level in marine vessels Released:5. 10. 2023REDLINE ISO/PRF 4266-2 - Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 2: Measurement of level in marine vessels Released:5. 10. 2023
PreviousNext
Draft
REDLINE ISO/PRF 4266-2 - Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 2: Measurement of level in marine vessels Released:5. 10. 2023
English language
12 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 4266-2
Second edition
2023-11
Petroleum and liquid petroleum
products — Measurement of level
and temperature in storage tanks by
automatic methods —
Part 2:
Measurement of level in marine
vessels
Pétrole et produits pétroliers liquides — Mesurage du niveau et de
la température dans les réservoirs de stockage par des méthodes
automatiques —
Partie 2: Mesurage du niveau dans les citernes de navire
Reference number
ISO 4266-2:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 4266-2:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 4266-2:2023(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Precautions . 3
4.1 Safety precautions . 3
4.1.1 General . 3
4.1.2 Equipment precautions . 3
4.2 General recommendations . 3
4.2.1 Accuracy and performance . 3
4.2.2 Speed of response . 3
4.2.3 Protection from mechanical damage . 4
4.2.4 Manual gauging . 4
4.2.5 Minimum measurable level . 4
4.2.6 Trim and list . 4
4.2.7 Product temperatures . 4
4.2.8 Compatibility . 4
4.2.9 Entrained air and vapour .
...

INTERNATIONAL ISO
STANDARD 4266-2
Second edition
2023-11
Petroleum and liquid petroleum
products — Measurement of level
and temperature in storage tanks by
automatic methods —
Part 2:
Measurement of level in marine
vessels
Pétrole et produits pétroliers liquides — Mesurage du niveau et de
la température dans les réservoirs de stockage par des méthodes
automatiques —
Partie 2: Mesurage du niveau dans les citernes de navire
PROOF/ÉPREUVE
Reference number
ISO 4266-2:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 4266-2:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
PROOF/ÉPREUVE © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 4266-2:2023(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Precautions . 3
4.1 Safety precautions . 3
4.1.1 General . 3
4.1.2 Equipment precautions . 3
4.2 General recommendations . 3
4.2.1 Accuracy and performance . 3
4.2.2 Speed of response . 3
4.2.3 Protection from mechanical damage . 4
4.2.4 Manual gauging . 4
4.2.5 Minimum measurable level . 4
4.2.6 Trim and list . 4
4.2.7 Product temperatures . 4
4.2.8 Compatibility . 4
4.2.9 Entrained air and vapour .
...

2023-08-10 Style Definition: Heading 1: Indent: Left: 0 pt, First
line: 0 pt, Tab stops: Not at 21.6 pt
ISO 4266-2:2023(E)
Style Definition: Heading 2: Font: Bold, Tab stops: Not
at 18 pt
ISO/TC 28/SC 2
Style Definition: Heading 3: Font: Bold
Style Definition: Heading 4: Font: Bold
DATE: 2023-xx
Style Definition: Heading 5: Font: Bold
Secretariat: BSI
Style Definition: Heading 6: Font: Bold
Style Definition: TOC Heading: Indent: Left: 0 pt, First
Petroleum and liquid petroleum products — Measurement of level and temperature in
line: 0 pt, Tab stops: Not at 21.6 pt
storage tanks by automatic methods —
Part 2: Measurement of level in marine vessels Style Definition: ANNEX
Style Definition: AMEND Terms Heading: Font: Bold
Pétrole et produits pétroliers liquides — Mesurage du niveau et de la température dans les
Style Definition: AMEND Heading 1 Unnumbered:
réservoirs de stockage par des méthodes automatiques —
Font: Bold
Partie 2: Mesurage du niveau dans les citernes de navire
Formatted: Font: Not Bold, Italic
Formatted: Font: Italic

---------------------- Page: 1 ----------------------
ISO 4266-2:2023(E)
© ISO 2023
Formatted: Pattern: Clear
Formatted: Pattern: Clear
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission
can be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.orgwww.iso.org
Published in Switzerland
ii © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 4266-2:2023(E)
Contents Page
Foreword Error! Bookmark not defined.
Introduction Error! Bookmark not defined.
1 Scope Error! Bookmark not defined.
2 Normative references Error! Bookmark not defined.
3 Terms and definitions Error! Bookmark not defined.
4 Precautions Error! Bookmark not defined.
4.1 Safety precautions Error! Bookmark not defined.
4.1.1 General Error! Bookmark not defined.
4.1.2 Equipment precautions Error! Bookmark not defined.
4.2 General precautions Error! Bookmark not defined.
4.2.1 Accuracy and performance Error! Bookmark not defined.
4.2.2 Speed of response Error! Bookmark not defined.
4.2.3 Protection from mechanical damage Error! Bookmark not defined.
4.2.4 Manual gauging Error! Bookmark not defined.
4.2.5 Minimum measurable level Error! Bookmark not defined.
4.2.6 Trim and list Error! Bookmark not defined.
4.2.7 Product temperatures Error! Bookmark not defined.
4.2.8 Compatibility Error! Bookmark not defined.
4.2.9 Entrained air and vapour Error! Bookmark not defined.
4.2.10 Vessel motion Error! Bookmark not defined.
4.3 Use of marine ALGs in fiscal/custody transfer Error! Bookmark not defined.
5 Accuracy Error! Bookmark not defined.
5.1 Intrinsic error of ALGs Error! Bookmark not defined.
5.2 Calibration prior to installation Error! Bookmark not defined.
5.3 Initial shipyard adjustment Error! Bookmark not defined.
5.4 Error caused by operating conditions Error! Bookmark not defined.
5.5 Overall accuracy Error! Bookmark not defined.
5.5.1 General Error! Bookmark not defined.
5.5.2 Use of ALGs for fiscal/custody transfer purposes Error! Bookmark not defined.
6 Installation of marine ALGs Error! Bookmark not defined.
6.1 General Error! Bookmark not defined.
6.2 Location of ALG Error! Bookmark not defined.
6.3 Location of manual calibration check point Error! Bookmark not defined.
6.4 Gauging of inerted tanks Error! Bookmark not defined.
7 Onboard verification of marine ALGs Error! Bookmark not defined.
7.1 General precautions Error! Bookmark not defined.
© ISO 2023 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 4266-2:2023(E)
7.1.1 Check for smooth operation of level-sensing elements— at the shipyard Error!
Bookmark not defined.
7.1.2 ALG technology-specific considerations Error! Bookmark not defined.
7.2 Verification by innage gauging or ullage gauging Error! Bookmark not defined.
7.3 Initial verification Error! Bookmark not defined.
7.4 Subsequent verification Error! Bookmark not defined.
7.4.1 General Error! Bookmark not defined.
7.4.2 Agreement between ALG reading and manual gauge readingError! Bookmark not
defined.
7.4.3 Use of average gauge readings Error! Bookmark not defined.
7.4.4 Adjustment of the ALG Error! Bookmark not defined.
7.5 Verification by alternate methods Error! Bookmark not defined.
7.6 Schedule for regular ALG verification Error! Bookmark not defined.
7.7 Record keeping Error! Bookmark not defined.
8 Data communication and receiving Error! Bookmark
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 4266-4:2023(Main)
Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 4: Measurement of temperature in atmospheric tanks

This document gives requirements and guidance on the selection, accuracy, installation, commissioning, calibration and verification of automatic tank thermometers (ATTs) in fiscal/custody transfer applications. The ATT is used for measuring the temperature of petroleum and liquid petroleum products having a Reid vapour pressure less than 100 kPa, stored in atmospheric storage tanks. This document is not applicable to the measurement of temperature in caverns or in refrigerated storage tanks.

  • Standard
    15 pages
    English language
    sale 15% off
ISO
ISO 4266-1:2023(Main)
Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 1: Measurement of level in atmospheric tanks

This document gives requirements and guidance on the accuracy, installation, commissioning, calibration and verification of automatic level gauges (ALGs). It applies to ALGs which are both intrusive and non-intrusive types, in fiscal/custody transfer applications for measuring the level of petroleum and petroleum products having a Reid vapour pressure less than 100 kPa, stored in atmospheric storage tanks. This document is not applicable to the measurement of level in refrigerated storage tanks with ALG equipment.

  • Standard
    19 pages
    English language
    sale 15% off
ISO
ISO 7278-2:2022(Main)
Petroleum measurement systems — Part 2: Pipe prover design, calibration and operation

This document provides descriptions of the different types of pipe provers, otherwise known as displacement provers, currently in use. These include sphere (ball) provers and piston provers operating in unidirectional and bidirectional forms. It applies to provers operated in conventional, reduced volume, and small volume modes. This document gives guidelines for: — the design of pipe provers of each type; — the calibration methods; — the installation and use of pipe provers of each type; — the interaction between pipe provers and different types of flowmeters; — the calculations used to derive the volumes of liquid measured (see Annex A); — the expected acceptance criteria for fiscal and custody transfer applications, given as guidance for both the calibration of pipe provers and when proving flowmeters (see Annex C). This document is applicable to the use of pipe provers for crude oils and light hydrocarbon products which are liquid at ambient conditions. The principles apply across applications for a wider range of liquids, including water. The principles also apply for low vapour pressure, chilled and cryogenic products, however use with these products can require additional guidance.

  • Standard
    109 pages
    English language
    sale 15% off
  • Standard
    118 pages
    French language
    sale 15% off
ISO
ISO 7507-2:2022(Main)
Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 2: Optical-reference-line method or electro-optical distance-ranging method
SIST ISO 7507-2:2023

This document specifies methods for the calibration of tanks above eight metres in diameter with cylindrical courses that are vertical. It provides two methods for determining the volumetric quantity of the liquid contained within a tank at gauged liquid levels. NOTE For optical-reference-line method, the optical (offset) measurements required to determine the circumferences can be taken internally or externally, provided that insulation is removed if tank is insulated. The methods are suitable for tilted tanks with up to 3 % deviation from the vertical provided that a correction is applied for the measurement tilt, as described in ISO 7507-1. These methods are alternatives to other methods such as strapping (ISO 7507-1) and the optical-triangulation method (ISO 7507-3).

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    28 pages
    English language
    sale 15% off
  • Standard
    30 pages
    French language
    sale 15% off
  • Draft
    28 pages
    English language
    sale 15% off
  • Draft
    30 pages
    French language
    sale 15% off
ISO
ISO 8222:2020/Amd 1:2022(Amendment)
Petroleum measurement systems — Calibration — Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials) — Amendment 1: Correction of two typographical errors
  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
  • Draft
    1 page
    English language
    sale 15% off
  • Draft
    1 page
    French language
    sale 15% off
ISO
ISO 22192:2021(Main)
Bunkering of marine fuel using the Coriolis mass flow meter (MFM) system

This document specifies procedures and requirements for the transfer of bunkers to vessels by bunker tankers using the Coriolis mass flow meter (MFM) system. It encompasses the process leading to the approval of the MFM system as installed on bunker tankers and post-approval bunkering operation. It covers terminology, specifications, requirements and procedures on metrology, system integrity, metering system selection and installation, MFM system verification, bunker delivery and dispute handling. NOTE Local and international regulations, such as the International Convention for the Prevention of Pollution from Ships (MARPOL) can apply.

  • Standard
    49 pages
    English language
    sale 15% off
  • Draft
    51 pages
    English language
    sale 15% off
ISO
ISO/TS 21354:2020(Main)
Measurement of multiphase fluid flow

This document establishes a common basis for, and assistance in, the classification of applications and multiphase meters, as well as guidance and recommendations for the implementation and use of such meters. The so-called in-line multiphase flow meters (MPFMs) that directly measure the oil, water and gas flow rates, as well as the partial- and full-separation MPFMs are the main focus of this document. Conventional two- or three-phase separators are not included in this document. Only limited reference is made to wet-gas meters, since although wet-gas flow is a subset of multiphase flow, wet-gas measurement is covered by ISO/TR 11583 and ISO/TR 12748.

  • Technical specification
    98 pages
    English language
    sale 15% off
  • Draft
    98 pages
    English language
    sale 15% off
ISO
ISO 8222:2020(Main)
Petroleum measurement systems — Calibration — Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials)

This document describes the design, use and calibration of volumetric measures (capacity measures) which are intended for use in fixed locations in a laboratory or in the field. This document gives guidance on both standard and non-standard measures. It also covers portable and mobile measures. This document is applicable to the petroleum industry; however, it may be applied more widely to other applications. This document excludes measures for cryogenic liquids and pressurized measures as used for liquid petroleum gas (LPG) and liquefied natural gas (LNG). Volumetric measures are classified as test measures or prover tanks depending on capacity and design. Measures described in this document are primarily designed, calibrated and used to measure volumes from a measure which is wetted and drained for a specified time before use and designated to deliver. Many of the provisions, however, apply equally to measures which are used to measure a volume using a clean and dry measure and designated to contain. Guidance is given regarding commonly expected uncertainties and calibration specifications. The document also provides, in Annex A, reference formulae describing the properties of water and other fluids and materials used in volumetric measurement more generally.

  • Standard
    70 pages
    English language
    sale 15% off
  • Standard
    78 pages
    French language
    sale 15% off
ISO
ISO 13739:2020(Main)
Petroleum products — Procedures for the transfer of bunkers to vessels

This document specifies procedures and requirements for the transfer of bunkers to vessels involving bunker tankers, road tankers and shore pipelines. It is applicable to pre-delivery, delivery and post-delivery checks and documentation.

  • Standard
    45 pages
    English language
    sale 15% off
ISO
ISO 2714:2017(Main)
Liquid hydrocarbons — Volumetric measurement by displacement meter

ISO 2714:2017 describes and discusses the characteristics of displacement flowmeters. Attention is given to the factors to be considered in the application of positive displacement meters to liquid metering. These include the properties and nature of the liquid to be metered, the correct installation and operation of the meter, environmental effects, and the wide choice of secondary and ancillary equipment. Aspects of meter proving and maintenance are also discussed. ISO 2714:2017 is applicable to the metering of any appropriate liquid. Guidance is given on the use of positive displacement meters in the metering of two-component mixtures of the same phase such as water and oil. It is not applicable to two-phase flow when gases or solids are present under metering conditions (i.e. two-phase flow). It can be applied to the many and varied liquids encountered in industry for liquid metering only. It is not restricted to hydrocarbons. Guidance on the performance expected for fiscal/custody transfer applications for hydrocarbons is outlined. ISO 2714:2017 is not applicable to cryogenic liquids such as liquefied natural gas (LNG) and refrigerated petroleum gas. It does not cover potable water and fuel dispenser applications.

  • Standard
    36 pages
    English language
    sale 15% off