Photography — Digital cameras — Measuring low-light performance

This document specifies a protocol to measure the low-light performance of a camera. It is applicable to the measurement of digital cameras including camera phones and other mobile devices. The performance aspects defined in this document are intended to all be tested. Picking one or some of them by the tester is out of scope of the usage of this document.

Photographie — Caméras numériques — Mesurage des performances dans des conditions de faible luminosité

General Information

Status
Published
Publication Date
04-Sep-2018
Current Stage
9093 - International Standard confirmed
Completion Date
20-Dec-2023
Ref Project

Relations

Buy Standard

Standard
ISO 19093:2018 - Photography -- Digital cameras -- Measuring low-light performance
English language
19 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 19093
First edition
2018-08
Photography — Digital cameras —
Measuring low-light performance
Photographie — Caméras numériques — Mesurage des performances
dans des conditions de faible luminosité
Reference number
ISO 19093:2018(E)
©
ISO 2018

---------------------- Page: 1 ----------------------
ISO 19093:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 19093:2018(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Test conditions and setup . 2
4.1 Test chart. 2
4.1.1 Test chart and illumination . 2
4.2 Camera settings . 3
4.2.1 General. 3
4.2.2 Test lenses . 4
4.2.3 Auto focus . 4
4.2.4 Quality and file type . 4
4.2.5 ISO sensitivity setting . 4
4.2.6 White balance . 4
4.2.7 Flash . 5
4.2.8 Noise reduction . 5
4.2.9 Exposure mode . 5
4.2.10 Scene and capture modes . 5
4.3 Capturing a reference image .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.