ISO 19697:2016
(Main)Ships and marine technology — Navigation and ship operations — Electronic inclinometers
Ships and marine technology — Navigation and ship operations — Electronic inclinometers
ISO 19697:2016 specifies the performance requirements, methods of testing and test results of electronic inclinometers required by the performance standard, IMO resolution MSC.363 (92), in addition to the general requirements contained in resolution A.694 (17) and is associated with IEC 60945. The electronic inclinometers provide information about actual heel angle, roll amplitude, roll period to support decision-making process on board in order to avoid dangerous situations, in stability (see Annex A for information), as well as to assist in maritime casualty investigation. The electronic inclinometers are mainly composed of a set of sensors, a signal processor, a display, an input device and an interface to other systems. It does not apply to the electronic inclinometers installed for purposes which are outside the scope of this document, e.g. monitoring of cargo status. Where a requirement in this document is different from IEC 60945, the requirement in this document takes precedence.
Navires et technologie maritime — Navigation et opérations maritimes — Inclinomètres électroniques
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 19697
First edition
2016-11-15
Ships and marine technology —
Navigation and ship operations —
Electronic inclinometers
Navires et technologie maritime — Navigation et opérations
maritimes — Inclinomètres électroniques
Reference number
ISO 19697:2016(E)
©
ISO 2016
---------------------- Page: 1 ----------------------
ISO 19697:2016(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 19697:2016(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Requirements . 3
4.1 General . 3
4.2 Functionality . 3
4.3 Information . 3
4.3.1 Actual heel angle and roll amplitude . 3
4.3.2 Roll period . 3
4.3.3 Roll peak hold value . 3
4.4 Display . 4
4.5 Alerts . 4
4.5.1 Operational alerts . 5
4.5.2 Functional alerts . 5
4.6 Interface . 6
4.7 Power supply . 6
5 Accuracy .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.