iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 62862-3-1:2022

(Main)

Solar thermal electric plants - Part 3-1: Systems and components - General requirements for the design of parabolic-trough solar thermal power plants

Solar thermal electric plants - Part 3-1: Systems and components - General requirements for the design of parabolic-trough solar thermal power plants

IEC 62862-3-1:2022 specifies the general requirements for the design of parabolic-trough solar thermal power plants. It includes requirements for the electric power system, solar resource assessment, site selection, overall planning, collector system, heat transfer system, thermal energy storage system, steam generation system, steam turbine system, layout of solar field, layout of power block, electrical equipment and system, water treatment system, instrumentation and control, auxiliary system and ancillary facilities, as well as considerations concerning health and safety.
This document is applicable to the design of new, expanded or rebuilt parabolic-trough solar thermal power plants using a steam turbine.

General Information

Status
Published
Publication Date
26-Jan-2022
ICS
27.160 - Solar energy engineering
Technical Committee
TC 117 - Solar thermal electric plants
Drafting Committee
PT 62862-3-1 - TC 117/PT 62862-3-1
Current Stage
PPUB - Publication issued
Start Date
18-Feb-2022
Completion Date
27-Jan-2022
Ref Project

Buy Standard

IEC 62862-3-1:2022 - Solar thermal electric plants - Part 3-1: Systems and components - General requirements for the design of parabolic-trough solar thermal power plantsIEC 62862-3-1:2022 - Solar thermal electric plants - Part 3-1: Systems and components - General requirements for the design of parabolic-trough solar thermal power plants
PreviousNext
Standard
IEC 62862-3-1:2022 - Solar thermal electric plants - Part 3-1: Systems and components - General requirements for the design of parabolic-trough solar thermal power plants
English language
44 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC 62862-3-1
®

Edition 1.0 2022-01
INTERNATIONAL
STANDARD



Solar thermal electric plants –
Part 3-1: Systems and components – General requirements for the design of
parabolic-trough solar thermal power plants
IEC 62862-3-1:2022-01(en)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2022 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.


IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.

Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 19 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc

If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.

---------------------- Page: 2 ----------------------
IEC 62862-3-1

®


Edition 1.0 2022-01




INTERNATIONAL



STANDARD



















Solar thermal electric plants –

Part 3-1: Systems and components – General requirements for the design of

parabolic-trough solar thermal power plants

























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 27.160 ISBN 978-2-8322-1069-7




  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 3 ----------------------
– 2 – IEC 62862-3-1:2022 © IEC 2022
CONTENTS
FOREWORD . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 General requirements . 9
5 Electric power system requirements . 9
5.1 General . 9
5.2 Grid-connection . 9
5.3 Relay protection and automatic safety devices . 10
5.4 Dispatching automation . 10
5.5 Electric power system communication . 10
5.6 Electric energy metering . 10
6 Solar resource assessment .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 62862-4-1:2022(Main)
Solar thermal electric plants - Part 4-1: General requirements for the design of solar power tower plants

IEC 62862-4-1:2022 specifies the general requirements for the design of solar power tower plants and covers the electric power system requirements, the solar resource assessment, the site selection, the overall planning, the layout of the heliostat field and the receiver tower, the layout of the power block, the collector system, the heat transfer, the thermal energy storage and steam generation system, the steam turbine system, the water treatment system, the information system, instrumentation and control, the electrical equipment and system, occupational safety and occupational health. This document is applicable to the design requirements of newly built, expanded or rebuilt solar power tower plants employing steam turbines with molten salt or water-steam as heat transfer fluid.

  • Standard
    30 pages
    English language
    sale 15% off
IEC
IEC 62862-5-2:2022(Main)
Solar thermal electric plants - Part 5-2: Systems and components - General requirements and test methods for large-size linear Fresnel collectors

IEC 62862-5-2:2022 specifies the requirements and the test methods for the characterization of a large-size linear Fresnel collector.
This document covers the determination of optical and thermal performance of linear Fresnel collectors, and the tracking accuracy of the collector one-axis tracking system. This test method is for outdoor testing only.
This document applies to linear Fresnel collectors according to Annex A equipped with the manufacturer-supplied sun tracking mechanism.
This document applies to the whole collector field in-situ or as a minimum unit to be tested to an individual collector string (loop) connected to the main piping (flow, return flow) to and from a heat sink, covering the full temperature range of the field.

  • Standard
    37 pages
    English language
    sale 15% off
IEC
IEC TS 62862-2-1:2021(Main)
Solar thermal electric plants - Part 2-1: Thermal energy storage systems - Characterization of active, sensible systems for direct and indirect configurations

IEC TS 62862-2-1:2021 defines the requirements and the test methods for the characterization of thermal energy storage (TES) systems. This document contains the information necessary for determining the performance and functional characteristics of active direct and indirect thermal energy storage systems based on sensible heat in solar thermal power plants using parabolic-trough collector, Fresnel collector or tower central receiver technology with liquid storage media.
This document includes characterization procedures for testing energy storage system charge and discharge, as well as reporting the results. Test performance requirements are given and the instrumentation necessary for them, as well as data acquisition and processing methods and methods for calculating the results and their uncertainties.

  • Technical specification
    48 pages
    English language
    sale 15% off
IEC
IEC TS 62862-3-3:2020(Main)
Solar thermal electric plants - Part 3-3: Systems and components - General requirements and test methods for solar receivers

IEC TS 62862-3-3:2020 specifies the technical requirements, tests, durability and technical performance parameters of solar thermal receivers for absorbing concentrated solar radiation and transferring the heat to a fluid used in concentrated solar thermal power plants with linear-focus solar collectors. The receivers addressed consist of an absorber tube and an insulating glass envelope tube.
This document includes the definitions of technical properties and characterization of geometry and performance parameters as well as the test methods for optical characterization, heat loss, and durability. For the sake of clarity, it is stated here that the thermal loss tests described in this document do not deliver the thermal loss of the receiver tubes when they are installed in commercial solar fields.

  • Technical specification
    55 pages
    English language
    sale 15% off
IEC
IEC 62862-3-2:2018(Main)
Solar thermal electric plants - Part 3-2: Systems and components - General requirements and test methods for large-size parabolic-trough collectors

IEC 62862-3-2:2018 specifies the requirements and the test methods for the characterization of a large-size parabolic-trough collector. This document covers the determination of optical and thermal performance of parabolic-trough collectors, and the tracking accuracy of the collector one-axis tracking system. This test method is for outdoor testing only. This document applies to parabolic-trough collectors equipped with the manufacturer-supplied sun tracking mechanism.

  • Standard
    48 pages
    English and French language
    sale 15% off
IEC
IEC TS 62862-1-1:2018(Main)
Solar thermal electric plants - Part 1-1: Terminology

IEC TS 62862-1-1:2018(E) contains the main terms and definitions used by the solar thermal electric (STE) industry and intends to be a reference for users of industry documents. Since the components and configurations of STE plants depend on the concentrating solar thermal technology used (i.e., central receiver, parabolic-trough collector, parabolic-dish or linear Fresnel concentrator), some terms are not applicable to all types of STE plants and notes have been introduced in their definitions for clarification.

  • Technical specification
    36 pages
    English language
    sale 15% off
IEC
IEC TS 62862-1-2:2017(Main)
Solar thermal electric plants - Part 1-2: General - Creation of annual solar radiation data set for solar thermal electric (STE) plant simulation

IEC TS 62862-1-2:2017(E) defines the procedures for the creation of annual solar radiation data sets (ASR) for solar thermal electricity (STE) plant simulation. This document defines procedures needed for the ASR construction as well as its components and parameters. The scope of application of this document refers to the needs associated with solar thermal power plant projects and mainly related to the simulation of an annual period with a solar radiation sum close to a normal annual value (from among an estimation of all possible annual values).

  • Technical specification
    27 pages
    English language
    sale 15% off
IEC
IEC TS 62862-1-3:2017(Main)
Solar thermal electric plants - Part 1-3: General - Data format for meteorological data sets

IEC TS 62862-1-3:2017(E) defines a data format for meteorological data sets. The goal of this document is to reduce efforts for data exchange and to avoid errors caused by misunderstandings due to the application of various different and at times unclear formats.

  • Technical specification
    19 pages
    English language
    sale 15% off
IEC
IEC 61730-1:2023 ED3(Main)
Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction

IEC 61730-1:2023 specifies and describes the fundamental construction requirements for photovoltaic (PV) modules in order to provide safe electrical and mechanical operation. Specific topics are provided to assess the prevention of electrical shock, fire hazards, and personal injury due to mechanical and environmental stresses. This document pertains to the particular requirements of construction. IEC 61730-2 defines the requirements for testing. Modules with modified construction are qualified as described in IEC TS 62915.
This document lays down requirements for terrestrial PV modules suitable for long-term operation in open-air climates with 98th percentile module operating temperatures of 70 °C or less. Guidelines for modules to be used at higher operating temperatures are described in IEC TS 63126.
This document is intended to apply to all terrestrial flat plate module materials, such as crystalline silicon module types as well as thin-film modules.
This document defines the basic requirements for various applications of PV modules, but it cannot be considered to encompass all national or regional codes.

  • Standard
    143 pages
    English and French language
    sale 15% off
IEC
IEC 61730-2:2023 ED3(Main)
Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing

IEC 61730-2:2023 is available as IEC 61730-2:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61730-2:2023 lists the tests a PV module is required to fulfil for safety qualification. This document applies for safety qualification only in conjunction with IEC 61730-1. The objective of this document is to provide the testing sequence intended to verify the safety of PV modules whose construction has been assessed by IEC 61730-1. The test sequence and pass criteria are designed to detect the potential breakdown of internal and external components of PV modules that would result in fire, electric shock, and/or personal injury. This document defines the basic safety test requirements and additional tests that are a function of the PV module end-use applications. The additional testing requirements outlined in relevant ISO documents, or the national or local codes which govern the installation and use of these PV modules in their intended locations, are considered in addition to the requirements contained within this document.

  • Standard
    134 pages
    English and French language
    sale 15% off