iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 60730-2-5:2013/COR1:2023

(Corrigendum)

Corrigendum 1 - Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems

Corrigendum 1 - Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems

Corrigendum 1 - Dispositifs de commande électrique automatiques - Partie 2-5: Exigences particulières pour les systèmes de commande électrique automatiques des brûleurs

General Information

Status
Published
Publication Date
15-Oct-2023
ICS
97.120 - Automatic controls for household use
Technical Committee
TC 72 - Automatic electrical controls
Current Stage
PPUB - Publication issued
Start Date
06-Dec-2023
Completion Date
16-Oct-2023
Ref Project

Relations

Corrects
IEC 60730-2-5:2013 - Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems
Effective Date
05-Sep-2023

Buy Standard

IEC 60730-2-5:2013/COR1:2023 - Corrigendum 1 - Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems Released:16. 10. 2023IEC 60730-2-5:2013/COR1:2023 - Corrigendum 1 - Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems Released:16. 10. 2023
PreviousNext
Standard
IEC 60730-2-5:2013/COR1:2023 - Corrigendum 1 - Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems Released:16. 10. 2023
English and French language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC 60730-2-5:2013/COR1:2023 – 1 –
© IEC 2023
INTERNATIONAL ELECTROTECHNICAL COMMISSION
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________

IEC 60730-2-5 IEC 60730-2-5
Edition 4.0  2013-11 Édition 4.0  2013-11


AUTOMATIC ELECTRICAL CONTROLS DISPOSITIFS DE COMMANDE ÉLECTRIQUE
AUTOMATIQUES

Partie 2-5: Exigences particulières pour les
Part 2-5: Particular requirements for automatic
systèmes de commande électrique automatiques
electrical burner control systems
des brûleurs


CO RRI G E NDUM 1



Corrections to the French version appear after the English text.
Les corrections à la version française sont données après le texte anglais.

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 60730-1:2022(Main)
Automatic electrical controls - Part 1: General requirements

IEC 60703-1:2022 applies to automatic electrical controls for use in, on, or in association with equipment for household appliance and similar use. This document applies to
- the inherent safety of automatic electrical controls, and
- functional safety of automatic electrical controls and safety related systems,
- controls where the performance (for example the effect of EMC phenomena) of the product can impair the overall safety and performance of the controlled system,
- the operating values, operating times, and operating sequences where such are associated with equipment safety.
This document specifies the requirements for construction, operation and testing of automatic electrical controls used in, on, or in association with an equipment.

  • Standard
    576 pages
    English and French language
    sale 15% off
IEC
IEC 60730-2-8:2018/AMD1:2021(Amendment)
Amendment 1 - Automatic electrical controls - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements
  • Standard
    12 pages
    English and French language
    sale 15% off
IEC
IEC 60730-2-14:2017/AMD2:2021(Amendment)
Amendment 2 - Automatic electrical controls - Part 2-14: Particular requirements for electric actuators
  • Standard
    14 pages
    English and French language
    sale 15% off
IEC
IEC 60730-2-5:2013/AMD2:2021(Amendment)
Amendment 2 - Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems
  • Standard
    21 pages
    English and French language
    sale 15% off
IEC
IEC 60730-2-9:2015/AMD2:2020(Amendment)
Amendment 2 - Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing control
  • Standard
    8 pages
    English and French language
    sale 15% off
IEC
IEC 60730-1:2013/AMD2:2020(Amendment)
Amendment 2 - Automatic electrical controls - Part 1: General requirements
  • Standard
    26 pages
    English and French language
    sale 15% off
IEC
IEC 60730-1:2013(Main)
Automatic electrical controls - Part 1: General requirements

IEC 60730-1:2013 applies to automatic electrical controls for use in, on, or in association with equipment for household and similar use. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This standard is applicable to controls for building automation within the scope of ISO 16484. This standard also applies to automatic electrical controls for equipment that may be used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications. This standard is also applicable to individual controls utilized as part of a control system or controls which are mechanically integral with multifunctional controls having non electrical outputs. This standard is also applicable to relays when used as controls for IEC 60335 appliances. Additional requirements for the safety and operating values of relays when used as controls for IEC 60335 appliances are contained in Annex U. This standard does not apply to automatic electrical controls intended exclusively for industrial process applications unless explicitly mentioned in the relevant part 2 or the equipment standard. This fifth edition cancels and replaces the fourth edition published in 2010. It constitutes a technical revision. The major changes with respect to the previous edition are as follows:
- modification of the title and scope;
- revisions to Clause H.26 based on changes in technology, applications, and to improve consistency and layout;
- modification to Table H.12 to align with CISPR 22;
- revisions to Annex J to correlate the fault modes of thermistors and to exempt thermistors used in conjunction with type 1 controls in SELV low power circuits from the tests specified in Annex J;
- new requirements covering battery-powered controls, and the use of batteries in controls;
- revision addressing the exclusion of relay faults;
- new/updated requirements in Clause 24, for switch mode power supplies;
- revisions covering the allowance of screwless-type clamping units complying with IEC 60999-1;
- new requirements addressing remotely actuated control functions;
- addition of a new/updated leakage current diagram to align the Annex E diagram with the diagram in IEC 60990 and updated requirements for temperature sensing controls. Key words: controls, electrical controls, automatic The contents of the corrigendum of September 2014 have been included in this copy.

  • Standard
    575 pages
    English and French language
    sale 15% off
IEC
IEC 60730-2-6:2015/AMD1:2019(Amendment)
Amendment 1 - Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
  • Standard
    8 pages
    English and French language
    sale 15% off
IEC
IEC 60730-2-6:2015(Main)
Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

IEC 60730-2-6:2015 applies to automatic electrical pressure sensing controls with a minimum gauge pressure rating of -60 kPa and a maximum gauge pressure rating of 4,2 MPa, for use in, on or in association with, equipment. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof. This standard is also applicable to individual pressure sensing controls utilized as part of a control system or pressure sensing controls which are mechanically integral with multi-functional controls having non-electrical outputs. Automatic electrical pressure sensing controls for equipment used by the public, such as equipment intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. This standard does not apply to pressure sensing controls intended exclusively for industrial process applications unless explicitly mentioned in the relevant equipment standard. This standard applies to inherent safety, operating values, operating sequences where such are associated with equipment protection, and to the testing of automatic electrical pressure sensing controls used in, on or in association with equipment. This standard is also applicable to the functional safety of low complexity safety related pressure sensing controls and systems. This standard is also applicable to pressure sensing controls for appliances within the scope of IEC 60335-1. This third edition cancels and replaces the second edition published in 2007. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- aligns the text with IEC 60730-1, Edition 5;
- modifies requirements for Class B control function (H.27.1.2.2);
- modifies requirements for Class C control function (H.27.1.2.3) and
- modifies requirements for faults during lock-out or safety- shut-down. Key words: sensing controls, control systems, pressure sensing
This publication is to be read in conjunction with IEC 60730-1:2013.

  • Standard
    66 pages
    English and French language
    sale 15% off
IEC
IEC 60730-2-11:2019(Main)
Automatic electrical controls - Part 2-11: Particular requirements for energy regulators

IEC 60730-2-11:2019 is available as IEC 60730-2-11:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60730-2-11:2019 applies to energy regulators for use in, on, or in association with equipment, including energy regulators for heating, air conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof.
This standard applies to the inherent safety, to the operating values, operating times and operating sequence where these are associated with equipment safety, and to the testing of automatic electrical energy regulator devices used in, or in association with, equipment.
This standard is also applicable to energy regulators for appliances within the scope of IEC 60335-1.
Throughout this standard the word “equipment” means “appliance and equipment”.
This standard also applies to automatic electrical energy regulators for equipment that may be used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications.
This standard does not apply to automatic electrical energy regulators designed exclusively for industrial process applications unless explicitly mentioned in the equipment standard.
This standard does not apply to equipment that are specifically within the scope of building automation equipment.
This standard is also applicable to individual energy regulators utilized as part of a control system or energy regulators which are mechanically integral with multi-functional controls having non-electrical outputs.
This standard applies to controls powered by primary or secondary batteries, requirements for which are contained within the standard, including Annex V
This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) revision to the title to remove “for household and similar use”;
b) changes to the scope and related modifications;
c) changes to definitions in Annex H.
This Part 2-11 is intended to be used in conjunction with IEC 60730 1. It was established on the basis of the fifth edition of that standard (2013) including Amendment 1 (2015). Consideration may be given to future editions of, or amendments to, IEC 60730-1.
Keywords: Automatic Controls, Energy Regulators, Control Systems

  • Standard
    30 pages
    English and French language
    sale 15% off