iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN IEC 63193:2021

(Main)

Lead-acid batteries for propulsion power of lightweight vehicles - General requirements and methods of test

Lead-acid batteries for propulsion power of lightweight vehicles - General requirements and methods of test

IEC 63193:2020 is applicable to lead-acid batteries powering electric two-wheelers (mopeds) and three-wheelers (e-rickshaws and delivery vehicles), and also to golf cars and similar light utility and multi-passenger vehicles. The document specifies methods of tests tailored to batteries destined for the above‑referenced types of vehicles so as to ensure satisfactory and safe battery performance in the intended application. This document does not apply for example to lead-acid cells and batteries used for: vehicle engine starting applications (IEC 60095 series); traction applications (IEC 60254 series); stationary applications (IEC 60896 series); general purpose applications (IEC 61056 series); or to motorized wheelchairs and similar personal assist vehicles

Bleibatterien für den Antrieb von Leichtkraftfahrzeugen - Allgemeine Anforderungen und Prüfverfahren

Batteries au plomb pour la puissance de propulsion des véhicules légers - Exigences générales et méthodes d'essai

L'IEC 63193:2020 applique aux batteries au plomb qui alimentent les véhicules à deux roues (cyclomoteurs) et à trois roues (cyclopousses électriques et véhicules de livraison) ainsi que les voiturettes de golf et véhicules industriels et multipassagers légers similaires. Le document spécifie les méthodes d'essai adaptées aux batteries destinées aux types de véhicules mentionnés ci-dessus. Il s'agit d'assurer les performances satisfaisantes et sûres de la batterie dans l'application prévue. Le présent document ne s'applique pas, par exemple, aux éléments et batteries au plomb utilisés pour: le démarrage du moteur d'un véhicule (série IEC 60095); la traction (série IEC 60254); les applications stationnaires (série IEC 60896); les applications générales (série IEC 61056); ou les fauteuils roulants motorisés et véhicules d'aide à la personne similaires.

Svinčeno-kislinske baterije za pogon in obratovanje lahkih vozil in opreme - Splošne zahteve in preskusne metode

General Information

Status
Published
Publication Date
07-Jan-2021
ICS
29.220.20 - Acid secondary cells and batteries
Technical Committee
CLC/TC 21X - Secondary cells and batteries
Drafting Committee
IEC/TC 21 - IEC_TC_21
Current Stage
6060 - Document made available - Publishing
Start Date
08-Jan-2021
Completion Date
08-Jan-2021
Ref Project
SIST EN IEC 63193:2021 - Lead-acid batteries for propulsion and operation of lightweight vehicles and equipment - General requirements and methods of test

Buy Standard

EN IEC 63193:2021EN IEC 63193:2021
PreviousNext
Standard
EN IEC 63193:2021
English language
59 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 63193:2021
01-februar-2021
Svinčeno-kislinske baterije za pogon in obratovanje lahkih vozil in opreme -
Splošne zahteve in preskusne metode
Lead-acid batteries for propulsion and operation of lightweight vehicles and equipment -
General requirements and methods of test
Batteries d'accumulateurs au plomb pour la propulsion et le fonctionnement de véhicules
et équipements légers - Prescriptions générales et méthodes d'essai
Ta slovenski standard je istoveten z: EN IEC 63193:2021
ICS:
29.220.20 Kislinski sekundarni členi in Acid secondary cells and
baterije batteries
SIST EN IEC 63193:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 63193:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 63193:2021


EUROPEAN STANDARD EN IEC 63193

NORME EUROPÉENNE

EUROPÄISCHE NORM
January 2021
ICS 29.220.20

English Version
Lead-acid batteries for propulsion power of lightweight vehicles -
General requirements and methods of test
(IEC 63193:2020)
Batteries au plomb pour la puissance de propulsion des Bleibatterien für den Antrieb von Leichtkraftfahrzeugen -
véhicules légers - Exigences générales et méthodes d'essai Allgemeine Anforderungen und Prüfverfahren
(IEC 63193:2020) (IEC 63193:2020)
This European Standard was approved by CENELEC on 2020-12-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 63193:2021 E

---------------------- Page: 3 ----------------------
SIST EN IEC 63193:2021
EN IEC 63193:2021 (E)
European foreword
The text of document 21/1056/FDIS, future edition 1 of IEC 63193, prepared by IEC/TC 21
"Secondary cells and batteries" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 63193:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-09-23
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-12-23
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 63193:2020 was approved by CENELEC as a European
Standard without any modification.
2

---------------------- Page: 4 ----------------------
SIST EN IEC 63193:2021
EN IEC 63193:2021 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60695-11-4 2011 Fire hazard testing - Part 11-4: Test flames - EN 60695-11-4 2011
50 W flame - Apparatus and confirmational
test method
IEC 60695-11-10 2013 Fire hazard
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 62877-1:2023(Main)
Electrolyte and water for vented lead acid accumulators - Part 1: Requirements for electrolyte
SIST EN IEC 62877-1:2024

IEC 62877-1:2023 is available as IEC 62877-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62877-1:2023 applies to electrolytes and their components used for filling vented lead acid batteries with dry-charged cells and for electrolyte replenishment, replacement or electrolyte density adjustment of batteries in operation. This document defines the composition, purity and properties of electrolyte, for application where specific instructions from the battery manufacturer are not available. This second edition cancels and replaces the first edition published in 2016. This edition includes the following significant technical changes with respect to the previous edition: - Addition of the concentration values of halogens in Table 4.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62485-5:2021/AC:2022-07(Corrigendum)
Safety requirements for secondary batteries and battery installations - Part 5: Safe operation of stationary lithium ion batteries
SIST EN IEC 62485-5:2021/AC:2022

IEC Corrected version

  • Corrigendum
    4 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62660-3:2022(Main)
Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 3: Safety requirements
SIST EN IEC 62660-3:2022

This part of IEC 62660 specifies test procedures and acceptance criteria for safety performance of secondary lithium-ion cells and cell blocks used for propulsion of electric vehicles (EV) including battery electric vehicles (BEV) and hybrid electric vehicles (HEV). This document determines the basic safety performance of cells used in a battery pack and system under intended use and reasonably foreseeable misuse or incident, during the normal operation of the EV. The safety requirements of the cell in this document are based on the premise that the cells are properly used in a battery pack and system within the limits for voltage, current and temperature as specified by the cell manufacturer (cell operating region). The evaluation of the safety of cells during transport and storage is not covered by this document. NOTE 1 The safety performance requirements for lithium-ion battery packs and systems are defined in ISO 6469‑1. The specifications and safety requirements for lithium-ion battery packs and systems of electrically propelled mopeds and motorcycles are defined in ISO 18243. IEC 62619 covers the safety requirements for the lithium-ion cells and batteries for industrial applications, including, for example, forklift trucks, golf carts, and automated guided vehicles. NOTE 2 Lithium cells, modules, battery packs, and battery systems are regulated by International Air Transport Association (IATA) and International Maritime Organization (IMO) for air and sea transport, and, regionally, by other authorities, mainly for land transport. Refer to IEC 62281 for additional information.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50342-1:2015/A2:2021(Amendment)
Lead-acid starter batteries - Part 1: General requirements and methods of test
SIST EN 50342-1:2016/A2:2021

TC21X working group 3 has been agree to implement following changes to EN 50342-1:2015/1:2018 - Deletion of high current discharge after water consumption test. This is not needed as a dedicated corrosion test is available in the document. - Limitation of the maximum discharge time in cranking performance test. Batteries with high power capability might be damaged if discharge until the cut off voltage of 6,0 V is reached. To prevent this the maximum discharge time of the second step of the cranking performance test has been limited to 180 s.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62485-6:2021(Main)
Safety requirements for secondary batteries and battery installations - Part 6: Safe operation of lithium-ion batteries in traction applications
SIST EN IEC 62485-6:2021

IEC 62485-6:2021 applies to battery installations used for electric off-road vehicles; it does not cover the design of such vehicles. Examples of the main applications are: - industrial • cleaning machines, • trucks for material handling, for example, lift trucks, tow trucks, automatic guided vehicles, • electrically propulsed lifting platforms; - other applications • electric powered boats and ships.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62485-5:2021(Main)
Safety requirements for secondary batteries and battery installations - Part 5: Safe operation of stationary lithium ion batteries
SIST EN IEC 62485-5:2021

IEC 62485-5:2020 applies to the installation of one or more stationary secondary batteries having a maximum aggregate DC voltage of 1 500 V to any DC part of the power network, and describes the principal measures for protections during normal operation or under expected fault conditions against hazards generated from: – electricity, – short-circuits, – electrolyte, – gas emission, – fire, – explosion. This document provides requirements on safety aspects associated with the installation, use, inspection, and maintenance and disposal of lithium ion batteries used in stationary applications.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50342-4:2020(Main)
Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy vehicles
SIST EN 50342-4:2021

This document is applicable to lead-acid batteries used for heavy vehicles. The object of this document is to specify the European requirements of the main dimensions of starter batteries. For new and future developments of the above applications, it is expected that only batteries from the “Preferred Types” series be used. Batteries of the series of “Other Types” exist under several national standards. They have been transferred from the previous standard EN 60095 4. The preferred types A, B and C are newly introduced and correspond closely to the types D4, D5 and D6 with some differences in tolerances and dimensions.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62984-3:2020(Main)
High-temperature secondary batteries - Part 3: Sodium-based batteries - Performance requirements and tests
SIST EN IEC 62984-3:2020

IEC 62984-3:2020 specifies performance requirements and test procedures for high­-temperature batteries based on sodium for mobile and/or stationary use and whose rated voltage does not exceed 1 500 V. Sodium based batteries include sodium-sulphur batteries and sodium-nickel chloride batteries; both are high-temperature batteries and use a solid, sodium conducting electrolyte. Additional information on sodium-based batteries technology, their chemistries and construction are given in Annex B. This document does not cover aircraft batteries, covered by IEC 60952 (all parts), and batteries for the propulsion of electric road vehicles, covered by IEC 61982 (all parts).

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62984-1:2020(Main)
High-temperature secondary batteries - Part 1: General requirements
SIST EN IEC 62984-1:2021

IEC 62984-1:2020 specifies general aspects, definitions and tests for high-temperature secondary batteries for mobile and/or stationary use and whose nominal voltage does not exceed 1 500 V. This document does not cover aircraft batteries, which are covered by IEC 60952 (all parts), or batteries for the propulsion of electric road vehicles, covered by IEC 61982 (all parts).

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62984-2:2020(Main)
High-temperature secondary batteries - Part 2: Safety requirements and tests
SIST EN IEC 62984-2:2021

IEC 62984-2:2020 specifies safety requirements and test procedures for high-temperature batteries for mobile and/or stationary use and whose rated voltage does not exceed 1 500 V. This document does not cover aircraft batteries, which are covered by IEC 60952 (all parts), and batteries for the propulsion of electric road vehicles, covered by IEC 61982 (all parts).

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day