EN IEC 61400-27-2:2020
(Main)Wind energy generation systems - Part 27-2: Electrical simulation models - Model validation
Wind energy generation systems - Part 27-2: Electrical simulation models - Model validation
IEC 61400-27-2:2020 specifies procedures for validation of electrical simulation models for wind turbines and wind power plants, intended to be used in power system and grid stability analyses. The validation procedures are based on the tests specified in IEC 61400-21 (all parts). The validation procedures are applicable to the generic models specified in IEC 61400-27-1 and to other fundamental frequency wind power plant models and wind turbine models. The validation procedures for wind turbine models focus on fault ride through capability and control performance. The fault ride through capability includes response to balanced and unbalanced voltage dips as well as voltage swells. The control performance includes active power control, frequency control, synthetic inertia control and reactive power control. The validation procedures for wind turbine models refer to the tests specified in IEC 61400-21-1. The validation procedures for wind turbine models refer to the wind turbine terminals.
Windenergieanlagen - Teil 27-2: Elektrische Simulationsmodelle - Validierung der Modelle
Systèmes de génération d’énergie éolienne - Partie 27-2: Modèles de simulation électrique - Validation des modèles
IEC 61400-27-2:2020 spécifie des procédures de validation des modèles de simulation électrique pour les éoliennes et les centrales éoliennes, destinées à être utilisées dans des analyses de stabilité du réseau d'énergie électrique et du réseau de distribution. Les procédures de validation reposent sur les essais spécifiés dans l'IEC 61400-21 (toutes les parties). Les procédures de validation sont applicables aux modèles génériques spécifiés dans l’IEC 61400-27-1 et aux autres modèles de centrales éoliennes et d’éoliennes à fréquence fondamentale. Les procédures de validation des modèles d'éoliennes se concentrent sur la capacité d’alimentation continue par défaut et les performances de commande. La capacité d’alimentation continue par défaut comprend la réponse aux creux de tension équilibrés et déséquilibrés, ainsi qu’aux hausses de tension. Les performances de commande comprennent la commande de puissance active, la commande de fréquence, la commande d’inertie synthétique et la commande de puissance réactive. Les procédures de validation applicables aux modèles d’éoliennes se rapportent aux essais spécifiés dans l’IEC 61400‑21‑1. Les procédures de validation applicables aux modèles d’éoliennes se rapportent aux bornes de l'éolienne.
Sistemi za proizvodnjo energije na veter - 27-2. del: Električni simulacijski modeli - Validacija modela (IEC 61400-27-2:2020)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 61400-27-2:2020
01-december-2020
Sistemi za proizvodnjo energije na veter - 27-2. del: Električni simulacijski modeli -
Validacija modela (IEC 61400-27-2:2020)
Wind energy generation systems - Part 27-2: Electrical simulation models - Model
validation (IEC 61400-27-2:2020)
Windenergieanlagen - Teil 27-2: Elektrische Simulationsmodelle - Validierung der
Modelle (IEC 61400-27-2:2020)
Systèmes de génération d’énergie éolienne - Partie 27-2: Modèles de simulation
électrique - Validation des modèles (IEC 61400-27-2:2020)
Ta slovenski standard je istoveten z: EN IEC 61400-27-2:2020
ICS:
27.180 Vetrne elektrarne Wind turbine energy systems
SIST EN IEC 61400-27-2:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 61400-27-2:2020
---------------------- Page: 2 ----------------------
SIST EN IEC 61400-27-2:2020
EUROPEAN STANDARD EN IEC 61400-27-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2020
ICS 27.180
English Version
Wind energy generation systems - Part 27-2: Electrical
simulation models - Model validation
(IEC 61400-27-2:2020)
Systèmes de génération d'énergie éolienne - Partie 27-2: Windenergieanlagen - Teil 27-2: Elektrische
Modèles de simulation électrique - Validation des modèles Simulationsmodelle - Validierung der Modelle
(IEC 61400-27-2:2020) (IEC 61400-27-2:2020)
This European Standard was approved by CENELEC on 2020-08-18. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61400-27-2:2020 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61400-27-2:2020
EN IEC 61400-27-2:2020 (E)
European foreword
The text of document 88/763/FDIS, future edition 1 of IEC 61400-27-2, prepared by IEC/TC 88 "Wind
energy generation systems" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 61400-27-2:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-05-18
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-08-18
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61400-27-2:2020 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
1
IEC 61400-21-2 NOTE Harmonized as EN IEC 61400-21-2
IEC 61400-25 (series) NOTE Harmonized as EN 61400-25 (series)
1
To be published. Stage at the time of publication: prEN IEC 61400-21-2:2020.
2
---------------------- Page: 4 ----------------------
SIST EN IEC 61400-27-2:2020
EN IEC 61400-27-2:2020 (E)
Annex ZA
(normative)
Normative references to international publications with their
corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.