EN 61094-1:2000
(Main)Measurement microphones - Part 1: Specifications for laboratory standard microphones
Measurement microphones - Part 1: Specifications for laboratory standard microphones
Specifies mechanical dimensions and certain electroacoustic characteristics for condenser microphones used as laboratory standards for the realization of the unit of sound pressure and for sound pressure measurements of the highest attainable accuracy. The specifications are intended to ensure that primary calibration by the reciprocity method can be readily carried out. Establishes a system for classifying laboratory standard condenser microphones into a number of types according to their dimensions and properties.
Messmikrofone - Teil 1: Anforderungen an Laboratoriums-Normalmikrofone
Microphones de mesure - Partie 1: Spécifications des microphones étalons de laboratoire
Spécifie les dimensions mécaniques et certaines caractéristiques électroacoustiques des microphones à condensateur utilisés comme étalons de laboratoire pour la réalisation de l'unité de pression acoustique et pour les mesures de pression acoustique faites avec la meilleure exactitude possible. Les spécifications sont destinées à assurer que l'étalonnage primaire par la méthode de réciprocité puisse facilement être mis en oeuvre. Etablit un système de classement des microphones à condensateur utilisés comme étalons de laboratoire en un certain nombre de types, selon leurs dimensions et leurs propriétés.
Measurement microphones - Part 1: Specifications for laboratory standard microphnes (IEC 61094-1:2000)
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Measurement microphones - Part 1: Specifications for laboratory standard microphnes (IEC 61094-1:2000)Messmikrofone -- Teil 1: Anforderungen an Laboratoriums-NormalmikrofoneMicrophones de mesure -- Partie 1: Spécifications des microphones étalons de laboratoireMeasurement microphones -- Part 1: Specifications for laboratory standard microphones33.160.50PriborAccessories17.140.50ElektroakustikaElectroacousticsICS:Ta slovenski standard je istoveten z:EN 61094-1:2000SIST EN 61094-1:2001en01-september-2001SIST EN 61094-1:2001SLOVENSKI
STANDARD
SIST EN 61094-1:2001
SIST EN 61094-1:2001
SIST EN 61094-1:2001
SIST EN 61094-1:2001
SIST EN 61094-1:2001
NORMEINTERNATIONALECEIIECINTERNATIONALSTANDARD61094-1Deuxième éditionSecond edition2000-07Microphones de mesure –Partie 1:Spécifications des microphones étalonsde laboratoireMeasurement microphones –Part 1:Specifications for laboratory standardmicrophones Commission Electrotechnique Internationale International Electrotechnical CommissionPour prix, voir catalogue en vigueurFor price, see current catalogueÓ IEC 2000
Droits de reproduction réservés
¾
Copyright - all rights reservedAucune partie de cette publication ne peut être reproduite niutilisée sous quelque forme que ce soit et par aucun procédé,électronique ou mécanique, y compris la photocopie et lesmicrofilms, sans l'accord écrit de l'éditeur.No part of this publication may be reproduced or utilized inany form or by any means, electronic or mechanical,including photocopying and microfilm, without permission inwriting from the publisher.International Electrotechnical Commission3, rue de Varembé
Geneva, SwitzerlandTelefax: +41 22 919 0300e-mail: inmail@iec.ch IEC web site
http://www.iec.chCODE PRIXPRICE CODENSIST EN 61094-1:2001
61094-1 Ó IEC:2000– 3 –CONTENTSPageFOREWORD .5Clause1Scope.72Normative references.73Terms and definitions.74Reference environmental conditions.135Classification of laboratory standard microphone.135.1General.135.2Type designation.156Characteristics of laboratory standard microphones.156.1Sensitivity.156.2Acoustic impedance.156.2.1General.156.2.2Equivalent volume of a microphone.156.3Upper limit of the dynamic range of a microphone.176.4Static pressure dependence of microphone sensitivity.176.5Temperature dependence of microphone sensitivity.176.6Humidity dependence of microphone sensitivity.176.7Electrical insulation resistance.196.8Stability of microphone sensitivity.196.9Pressure-equalizing leakage.197Specifications.197.1Mechanical dimensions.197.2Ground shield reference configuration.237.3Electroacoustical specifications.257.4Identification markings.27SIST EN 61094-1:2001
61094-1 Ó IEC:2000– 5 –INTERNATIONAL ELECTROTECHNICAL COMMISSION____________MEASUREMENT MICROPHONES –Part 1: Specifications for laboratory standard microphonesFOREWORD1)The IEC (Inte
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.