Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-5: Examinations and measurements - Wavelength dependence of attenuation

Aims at measuring the wavelength dependence of the attenuation of a single mode fibre optic device. Can also be used to measure the wavelength dependence of the coupling ratio.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Meßverfahren - Teil 3-5: Untersuchungen und Messungen - Wellenlängenabhängigkeit von Dämpfung

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 3-5: Examens et mesures - Affaiblissement en fonction de la longueur d'onde

Aims at measuring the wavelength dependence of the attenuation of a single mode fibre optic device. Can also be used to measure the wavelength dependence of the coupling ratio.

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-5: Examinations and measurements - Wavelenght dependence of attenuation (IEC 61300-3-5:2000)

General Information

Status
Withdrawn
Publication Date
01-Feb-2001
Withdrawal Date
31-Dec-2003
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
07-Dec-2012
Completion Date
07-Dec-2012

Relations

Buy Standard

Standard
EN 61300-3-5:2002
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61300-3-5:2002
01-september-2002
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 3-5: Examinations and measurements -
Wavelenght dependence of attenuation (IEC 61300-3-5:2000)
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures -- Part 3-5: Examinations and measurements - Wavelength
dependence of attenuation
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Meßverfahren -- Teil 3-5: Untersuchungen und Messungen - Wellenlängenabhängigkeit
von Dämpfung
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures -- Partie 3-5: Examens et mesures -
Affaiblissement en fonction de la longueur d'onde
Ta slovenski standard je istoveten z: EN 61300-3-5:2001
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-3-5:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61300-3-5:2002

---------------------- Page: 2 ----------------------

SIST EN 61300-3-5:2002
EUROPEAN STANDARD EN 61300-3-5
NORME EUROPÉENNE
EUROPÄISCHE NORM February 2001
ICS 33.180.20
English version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures
Part 3-5: Examinations and measurements -
Wavelength dependence of attenuation
(IEC 61300-3-5:2000)
Dispositifs d'interconnexion et Lichtwellenleiter - Verbindungselemente
composants passifs à fibres optiques - und passive Bauteile - Grundlegende
Méthodes fondamentales d'essais et Prüf- und Meßverfahren
de mesures Teil 3-5: Untersuchungen und Messungen -
Partie 3-5: Examens et mesures - Wellenlängenabhängigkeit von Dämpfung
Affaiblissement en fonction de la (IEC 61300-3-5:2000)
longueur d'onde
(CEI 61300-3-5:2000)
This European Standard was approved by CENELEC on 2001-01-01. CENELEC members are bound
to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-3-5:2001 E

---------------------- Page: 3 ----------------------

SIST EN 61300-3-5:2002
EN 61300-3-5:2001 - 2 -
Foreword
The text of document 86B/1385/FDIS, future edition 1 of IEC 61300-3-5, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to
the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-3-5 on 2001-01-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2001-10-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2004-01-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-3-5:2000 was approved by CENELEC as a
European Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 61300-3-5:2002
- 3 - EN 61300-3-5:2001
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated re
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.