EN ISO 17708:2003
(Main)Footwear - Test methods for whole shoe - Upper sole adhesion (ISO 17708:2003)
Footwear - Test methods for whole shoe - Upper sole adhesion (ISO 17708:2003)
ISO 17708:2003 describes a test method for the determination of the resistance to separation of the upper from the outsole or the resistance to separation of adjacent layers of the outsole or resistance to tear failure of the upper or the sole. It also defines conditions of ageing that can be used for production control.
It applies to all types of footwear (produced by cementing, vulcanization, injection moulding, etc.) for which evaluation of adhesion of the sole to the upper is needed and where the upper is continuously assembled (closed shoes).
Schuhe - Prüfverfahren für den ganzen Schuh - Sohlenhaftung (ISO 17708:2003)
Dieser Normentwurf legt ein Verfahren für die Bestimmung des Trennwiderstandes der Sohle vom Schuhoberteil fest. Das Verfahren gilt für alle Schuhtypen (mit geklebten, vulkanisierten, gespritzten, geformten usw. Laufsohlen), für die eine Bewertung des Haftvermögens der Sohle am Schuh erforderlich ist und bei denen der obere Schuhteil durchgehend befestigt ist (geschlossener Schuh).
Chaussures - Méthodes d'essai applicables à la chaussure entière - Liaison tige semelle (ISO 17708:2003)
L'ISO 17708:2003 décrit une méthode d'essai visant à déterminer la résistance au pelage de l'assemblage tige-semelle, la résistance au pelage de couches adjacentes de la semelle d'usure ou la résistance à la déchirure de la tige ou de la semelle. Elle définit également les conditions de vieillissement utilisables pour le contrôle de production.
Elle s'applique à tous les types d'articles chaussants (collage, vulcanisation, moulage par injection, etc.) pour lesquels il est nécessaire d'évaluer l'adhérence de la semelle à la tige et dont la tige présente une marge d'assemblage continue (chaussures fermées).
Footwear - Test methods for whole shoe - Upper sole adhesion (ISO 17708:2003)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 17708:2004
01-januar-2004
Footwear - Test methods for whole shoe - Upper sole adhesion (ISO 17708:2003)
Footwear - Test methods for whole shoe - Upper sole adhesion (ISO 17708:2003)
Schuhe - Prüfverfahren für den ganzen Schuh - Sohlenhaftung (ISO 17708:2003)
Chaussures - Méthodes d'essai applicables a la chaussure entiere - Liaison tige semelle
(ISO 17708:2003)
Ta slovenski standard je istoveten z: EN ISO 17708:2003
ICS:
61.060 Obuvala Footwear
SIST EN ISO 17708:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 17708:2004
---------------------- Page: 2 ----------------------
SIST EN ISO 17708:2004
EUROPEAN STANDARD
EN ISO 17708
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2003
ICS 61.060
English version
Footwear - Test methods for whole shoe - Upper sole adhesion
(ISO 17708:2003)
Chaussures - Méthodes d'essai applicables à toute la Schuhe - Prüfverfahren für den ganzen Schuh -
chaussure entière - Liaison tige semelle (ISO 17708:2003) Sohlenhaftung (ISO 17708:2003)
This European Standard was approved by CEN on 28 February 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17708:2003 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 17708:2004
EN ISO 17708:2003 (E)
Contents
page
Foreword. 3
1 Scope. 4
2 Normative references . 4
3 Term and definition. 4
4 Apparatus and material . 4
4.1 Sharpness tool . 4
4.2 Tensile testing machine . 4
4.3 Vernier callipers . 4
5 Sampling and conditioning. 5
5.1 Footwear conditioning. 5
5.2 Samples number . 5
5.3 Preparation of test pieces . 5
5.3.1 Upper-sole adhesion: construction type a (see Figure 1). 5
5.3.2 Upper-sole adhesion: construction types b, c, d and e (see Figure 1). 5
5.3.3 Sole-interlayer adhesion: construction types f and g (see Figure 1) . 5
6 Test method.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.