Railway applications - Wheel/Rail friction management - Part 2-3: Properties and Characteristics - Adhesion materials

This document specifies the requirements of adhesion materials intended to be applied to the interface between the wheel tread and the rail crown (active interface). It can be applied either directly or indirectly to the wheel tread or rail.
It outlines the information required for most approval procedures, the method of testing and routine control/monitoring of the material.
This document does not deal with Top of Rail materials. For Top of Rail materials see CEN/TS 15427-2-2:2021.

Bahnanwendungen - Reibungsmanagement zwischen Rad und Schiene - Teil 2-3: Eigenschaften und Merkmale - Kraftschlusserhöhende Materialien

Dieses Dokument legt die Anforderungen an kraftschlusserhöhende Materialien für die Anwendung auf der Kontaktfläche zwischen Radlauffläche und Fahrfläche der Schiene (aktive Kontaktfläche) fest. Diese können direkt oder indirekt auf die Radlauffläche oder die Schiene angewendet werden.
Es beschreibt die erforderlichen Informationen für die meisten Genehmigungsverfahren, das Prüfverfahren und die regelmäßige Kontrolle/Überwachung des Materials.
Dieses Dokument behandelt keine Kraftschlussmodifikatoren. Zu Kraftschlussmodifikatoren siehe CEN/TS 15427 2 2:2021.

Applications ferroviaires - Gestion des frottements roue/rail - Partie 2 3 : Propriétés et caractéristiques - Matériaux pour restauration d'adhérence

Železniške naprave - Trenje na stiku kolo-tirnica - 2-3. del: Lastnosti in karakteristike - Lepilni materiali

General Information

Status
Withdrawn
Publication Date
02-Mar-2021
Withdrawal Date
17-Oct-2023
Current Stage

Relations

Buy Standard

Technical specification
TS CEN/TS 15427-2-3:2021 - BARVE
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 15427-2-3:2021
01-maj-2021
Železniške naprave - Trenje na stiku kolo-tirnica - 2-3. del: Lastnosti in
karakteristike - Lepilni materiali
Railway applications - Wheel/Rail friction management - Part 2-3: Properties and
Characteristics - Adhesion materials
Bahnanwendungen - Reibungsmanagement zwischen Rad und Schiene - Teil 2-3:
Eigenschaften und Merkmale - Kraftschlussmaterialien
Applications ferroviaires - Gestion du frottement roue/rail - Parte 2-3: Propriétés et
Caractéristiques - Matériau d'Adhésion
Ta slovenski standard je istoveten z: CEN/TS 15427-2-3:2021
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
SIST-TS CEN/TS 15427-2-3:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 15427-2-3:2021

---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 15427-2-3:2021


CEN/TS 15427-2-3
TECHNICAL SPECIFICATION

SPÉCIFICATION TECHNIQUE

March 2021
TECHNISCHE SPEZIFIKATION
ICS 45.040
English Version

Railway applications - Wheel/Rail friction management -
Part 2-3: Properties and Characteristics - Adhesion
materials
Applications ferroviaires - Gestion du frottement Bahnanwendungen - Reibungsmanagement zwischen
roue/rail - Parte 2-3: Propriétés et Caractéristiques - Rad und Schiene - Teil 2-3: Eigenschaften und
Matériau d'Adhésion Merkmale - Kraftschlussmaterialien
This Technical Specification (CEN/TS) was approved by CEN on 27 December 2020 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15427-2-3:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 15427-2-3:2021
CEN/TS 15427-2-3:2021 (E)
Contents                                                        Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Adhesion material requirements . 6
5 General requirements . 6
5.1 Introduction . 6
5.2 Product specification . 6
5.3 Technical file . 7
6 Control and monitoring of product . 7
6.1 Manufacturing process . 7
6.2 Composition of material .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.