EN 12350-10:2010
(Main)Testing fresh concrete - Part 10: Self-compacting concrete - L box test
Testing fresh concrete - Part 10: Self-compacting concrete - L box test
This European Standard specifies the procedure for determining the passing ability ratio for self-compacting concrete using the L box test.
Prüfung von Frischbeton - Teil 10: Selbstverdichtender Beton - L-Kasten-Versuch
Diese Europäische Norm legt das Verfahren zur Bestimmung des Fließvermögens von selbstverdichtendem
Beton unter Verwendung des L-Kasten-Versuchs fest.
Essai pour béton frais - Partie 10: Béton auto-plaçant - Essai à la boîte en L
La présente Norme européenne spécifie la méthode de détermination du taux de remplissage, à l'aide de l'essai à la boîte en L, pour le béton auto-plaçant.
Preskušanje svežega betona - 10. del: Samozgoščevalni beton - Preskus z L-zabojem
Ta evropski standard določa postopek za ugotavljanje stopnje zmožnosti prehodnosti za samozgoščevalni beton z uporabo L-zaboja.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.]DERMHPPrüfung von Frischbeton - Teil 10: Selbstverdichtender Beton - L-Kasten-VersuchEssai pour béton frais - Partie 10: Béton auto-plaçant - Essai à la boîte en LTesting fresh concrete - Part 10: Self-compacting concrete - L box test91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:Ta slovenski standard je istoveten z:EN 12350-10:2010SIST EN 12350-10:2010en,fr,de01-december-2010SIST EN 12350-10:2010SLOVENSKI
STANDARD
SIST EN 12350-10:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12350-10
July 2010 ICS 91.100.30 English Version
Testing fresh concrete - Part 10: Self-compacting concrete - L box test
Essai pour béton frais - Partie 10: Béton auto-plaçant - Essai à la boîte en L
Prüfung von Frischbeton - Teil 10: Selbstverdichtender Beton - L-Kasten-Versuch This European Standard was approved by CEN on 20 June 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12350-10:2010: ESIST EN 12350-10:2010
EN 12350-10:2010 (E) 2 Contents Page Foreword .31Scope .52Normative references .53Principle .54Apparatus .55Test sample .76Test procedure .77Test result .88Test report .89Repeatability and reproducibility .8Bibliography . 10 SIST EN 12350-10:2010
EN 12350-10:2010 (E) 3 Foreword This document (EN 12350-10:2010) has been prepared by Technical Committee CEN/TC 104 “Concrete and related products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2011, and conflicting national standards shall be withdrawn at the latest by January 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). This standard is based on the results from the EU-project "Testing-SCC" under the 5th Frame
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.