EN ISO 5467-2:2022
(Main)Dentistry - Mobile dental units and dental patient chairs - Part 2: Air, water, suction and wastewater systems (ISO 5467-2:2022)
Dentistry - Mobile dental units and dental patient chairs - Part 2: Air, water, suction and wastewater systems (ISO 5467-2:2022)
This document specifies the requirements and test methods for mobile dental units concerning:
a) the properties of mobile dental unit connections to the compressed air supply, water supply, suction supply, and wastewater drain plumbing,
b) the materials, design, and construction of the compressed air and water system within the mobile dental unit,
c) the quality for incoming water and air,
d) the performance of mobile dental unit suction system, and
e) the air, water, suction and wastewater properties of mobile dental unit connections to the interfaces to dental handpieces.
This document also specifies requirements for instructions for use and a technical description.
This document is only applicable to mobile dental units that are not used for oral surgery treatment requiring sterile air and water supplies. Amalgam separators are not included in this document.
Zahnheilkunde - Mobile dentale Behandlungseinheiten und dentale Patientenliegen - Teil 2: Luft, Wasser, Absaugung und Abwasser (ISO 5467-2:2022)
Dieses Dokument legt Anforderungen und Prüfverfahren für mobile dentale Behandlungseinheiten fest für
a) die Eigenschaften der Anschlüsse der mobilen dentalen Behandlungseinheiten zur Druckluftversorgung, Wasserversorgung, Absaugung und zu den Abwasserrohrleitungen,
b) die Materialien, Gestaltung und Bauweise der Druckluft- und Wasserversorgung innerhalb der mobilen dentalen Behandlungseinheit,
c) die Qualität des einströmenden Wassers und der einströmenden Luft,
d) die Leistungsfähigkeit des Absaugsystems in der mobilen dentalen Behandlungseinheit und
e) die Luft-, Wasser-, Absaugungs- und Abwassereigenschaften von mobilen dentalen Behandlungseinheiten an den Schnittstellen zu dentalen Handstücken.
Dieses Dokument legt auch Anforderungen an die Gebrauchsanweisung und an die technische Beschreibung fest.
Dieses Dokument beschränkt sich auf mobile dentale Behandlungseinheiten, die nicht für kieferchirurgische Behandlungen eingesetzt werden, die eine sterile Luft- und Wasserversorgung erfordern. Amalgamabscheider sind in diesem Dokument nicht enthalten.
Médecine bucco-dentaire - Units dentaires et fauteuils dentaires patient mobiles - Partie 2: Systèmes d'alimentation en air et en eau, d'aspiration et d'évacuation des eaux usées (ISO 5467-2:2022)
Le présent document spécifie les exigences et les méthodes d’essai applicables aux units dentaires mobiles concernant:
a) les propriétés des branchements des units dentaires mobiles aux conduites d’alimentation en air comprimé, d’alimentation en eau, d’aspiration et aux canalisations d’évacuation des eaux usées,
b) les matériaux, la conception et la construction du système d’alimentation en air comprimé et en eau de l'unit dentaire mobile,
c) la qualité de l’eau et de l’air d’entrée,
d) la performance du système d’aspiration de l'unit dentaire mobile, et
e) les propriétés de l’air, de l'eau, de l’aspiration et des eaux usées des branchements des units dentaires mobiles aux interfaces des pièces à main dentaires.
Le présent document spécifie également les exigences relatives aux instructions d'utilisation et à la description technique.
Le présent document est uniquement applicable aux units dentaires mobiles qui ne sont pas utilisés pour le traitement de chirurgie buccale nécessitant une alimentation en eau et en eau stérile. Les dispositifs de récupération de l’amalgame ne sont pas inclus dans le présent document.
Zobozdravstvo - Mobilne dentalne enote in stoli za paciente - 2. del: Sistemi za dovod zraka in vode, za sukcijo (aspiracijo) in odvod odpadne vode (ISO 5467-2:2022)
Ta dokument določa zahteve in preskusne metode za brizge za mobilne dentalne enote v zvezi s kakovostjo zraka in vode.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 5467-2:2023
01-januar-2023
Zobozdravstvo - Mobilne dentalne enote in stoli za paciente - 2. del: Sistemi za
dovod zraka in vode, za sukcijo (aspiracijo) in odvod odpadne vode (ISO 5467-
2:2022)
Dentistry - Mobile dental units and dental patient chairs - Part 2: Air, water, suction and
wastewater systems (ISO 5467-2:2022)
Zahnheilkunde - Mobile Behandlungseinheiten und Patientenliegen - Teil 2: Luft, Wasser,
Absaugung und Abwasser (ISO 5467-2:2022)
Médecine bucco-dentaire - Units dentaires et fauteuils dentaires patient mobiles - Partie
2: Systèmes d'alimentation en air et en eau, d'aspiration et d'évacuation des eaux usées
(ISO 5467-2:2022)
Ta slovenski standard je istoveten z: EN ISO 5467-2:2022
ICS:
11.060.20 Zobotehnična oprema Dental equipment
SIST EN ISO 5467-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 5467-2:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 5467-2:2023
EN ISO 5467-2
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2022
EUROPÄISCHE NORM
ICS 11.060.20
English Version
Dentistry - Mobile dental units and dental patient chairs -
Part 2: Air, water, suction and wastewater systems (ISO
5467-2:2022)
Médecine bucco-dentaire - Units dentaires et fauteuils Zahnheilkunde - Mobile Behandlungseinheiten und
dentaires patient mobiles - Partie 2: Systèmes Patientenliegen - Teil 2: Luft, Wasser, Absaugung und
d'alimentation en air et en eau, d'aspiration et Abwasser (ISO 5467-2:2022)
d'évacuation des eaux usées (ISO 5467-2:2022)
This European Standard was approved by CEN on 6 September 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5467-2:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 5467-2:2023
EN ISO 5467-2:2022 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 5467-2:2023
EN ISO 5467-2:2022 (E)
European foreword
This document (EN ISO 5467-2:2022) has been prepared by Technical Committee ISO/TC 106
"Dentistry" in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2023, and conflicting national standards shall be
withdrawn at the latest by April 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.