EN 13232-2:2023
(Main)Railway applications - Track - Switches and crossings for Vignole rails - Part 2: Requirements for geometric design
Railway applications - Track - Switches and crossings for Vignole rails - Part 2: Requirements for geometric design
This document:
— establishes the design process for switches and crossings (S&C), and the use of the other parts of this standard;
— specifies the geometric design principles for wheel guidance;
— establishes the basic limits of supply;
— establishes the applied forces and their adequate support;
— specifies tolerance levels.
These are illustrated herein by application to a turnout. The main switch and crossing components are represented in turnouts and the principles used in turnouts apply equally to more complex layouts.
Bahnanwendungen - Oberbau - Weichen und Kreuzungen für Vignolschienen - Teil 2: Anforderungen an den geometrischen Entwurf
Dieses Dokument
— legt den Konstruktionsprozess für Weichen und Kreuzungen und den Gebrauch der anderen Teile dieser Normreihe fest,
— definiert geometrische Konstruktionsgrundsätze für die Radführung,
— legt den wesentlichen Lieferumfang fest,
— legt auftretende Kräfte und ihr entsprechendes Abfangen fest, und
— definiert Toleranzstufen.
Diese werden am Beispiel einer Weiche dargestellt. Die Grundsätze, die für Weichen angewandt werden, sind gleichermaßen auf umfangreichere Weichenanlagen anwendbar.
Applications ferroviaires - Voie - Appareils de voie pour rails Vignole - Partie 2 : Exigences pour la conception géométrique
Le présent document :
— établit le processus de conception des appareils de voie, ainsi que l'utilisation des autres parties de la présente norme ;
— spécifie les principes de conception géométrique pour le guidage des roues ;
— établit les limites essentielles pour la fourniture ;
— établit les forces appliquées et leur support adéquat ;
— spécifie les niveaux des tolérances.
Dans le présent document, ces aspects sont présentés en les appliquant aux branchements. Les principaux composants des appareils de voie sont représentés dans des branchements. Les principes appliqués dans les branchements sont également applicables dans les assemblages plus complexes.
Železniške naprave - Zgornji ustroj proge - Kretnice in križišča za Vignolove tirnice - 2. del: Geometrijske zahteve pri projektiranju
Ta del evropskega standarda zajema naslednje vsebine:
– načela geometrijskega projektiranja za usmerjanje koles;
– opredelitev osnovnih omejitev dobave;
– delovanje sil in njihova ustrezna podpora;
– ravni tolerance.
Te vsebine so v tem dokumentu ponazorjene z uporabo za kretniški sistem. Glavni sestavni deli kretnic in križišč so predstavljeni v kretniških sistemih, pri čemer se načela v zvezi s kretniškimi sistemi prav tako uporabljajo za kompleksnejše postavitve.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13232-2:2023
01-december-2023
Železniške naprave - Zgornji ustroj proge - Kretnice in križišča za Vignolove tirnice
- 2. del: Geometrijske zahteve pri projektiranju
Railway applications - Track - Switches and crossings for Vignole rails - Part 2:
Requirements for geometric design
Bahnanwendungen - Oberbau - Weichen und Kreuzungen für Vignolschienen - Teil 2:
Anforderungen an den geometrischen Entwurf
Applications ferroviaires - Infrastructure - Appareils de voie - Partie 2: Exigences de la
conception géométrique
Ta slovenski standard je istoveten z: EN 13232-2:2023
ICS:
45.080 Tračnice in železniški deli Rails and railway
components
93.100 Gradnja železnic Construction of railways
SIST EN 13232-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13232-2:2023
---------------------- Page: 2 ----------------------
SIST EN 13232-2:2023
EN 13232-2
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2023
EUROPÄISCHE NORM
ICS 93.100 Supersedes EN 13232-2:2003+A1:2011
English Version
Railway applications - Track - Switches and crossings for
Vignole rails - Part 2: Requirements for geometric design
Applications ferroviaires - Voie - Appareils de voie Bahnanwendungen - Oberbau - Weichen und
pour rails Vignole - Partie 2 : Exigences pour la Kreuzungen für Vignolschienen - Teil 2: Anforderungen
conception géométrique an den geometrischen Entwurf
This European Standard was approved by CEN on 23 October 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13232-2:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13232-2:2023
EN 13232-2:2023
Contents
European foreword . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Design process . 7
4.1 General process . 7
4.2 Design step details . 8
4.3 Practical use of the design process . 8
5 General design requirements . 8
5.1 Reference points . 8
5.2 General tangency rules .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.