Tower cranes - Anti-collision systems - Safety requirements

This document specifies the requirements of anti-collision devices and systems installed on tower cranes (as defined in EN 14439) to avoid the risks of collision between several cranes in service, between a crane in use and fixed obstacles, and over prohibited zones.
It also specifies the requirements for working range limiting devices.
Anti-collision devices and systems and working range limiting devices according to this document are safety components.
It applies to anti-collision devices manufactured after the publication of this document.
NOTE   For anti-collision systems used to avoid the risk of collision with power lines, additional requirements might be necessary.
This document defines the safety characteristics and requirements of anti-collision devices and systems intended for installation on self-erecting tower cranes and tower cranes erected from parts.
In particular:
-   performance level;
-   information to be provided by the sensors installed on the crane;
-   operation, particularly in the event of failure, override and free jib slewing states of a crane;
-   type of communication between devices;
-   information for the crane operator and outside indicator.
It also specifies the requirements for marking the device or the system and the content of the instructions for use.
The significant hazards covered by this document are identified in Clause 4.
This document is not applicable to anti-collision devices and systems which are manufactured before the date of publication by CEN of this document.

Turmdrehkrane - Antikollisionssysteme - Sicherheitstechnische Anforderungen

Grues à tour - Systèmes anti-collision - Prescriptions de sécurité

Stolpni žerjavi - Sistemi za preprečitev trka - Varnostne zahteve - Dopolnilo A1

General Information

Status
Not Published
Publication Date
16-Oct-2024
Current Stage
4599 - Dispatch of FV draft to CMC - Finalization for Vote
Start Date
29-Apr-2024
Due Date
02-Jan-2024
Completion Date
29-Apr-2024

Relations

Buy Standard

Draft
EN 17076:2021/oprA1:2023
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 17076:2021/oprA1:2023
01-januar-2023
Stolpni žerjavi - Sistemi za preprečitev trka - Varnostne zahteve - Dopolnilo A1
Tower cranes - Anti-collision systems - Safety requirements
Turmdrehkrane - Antikollisionssysteme - Sicherheitstechnische Anforderungen
Grues à tour - Systèmes anti-collision - Prescriptions de sécurité
Ta slovenski standard je istoveten z: EN 17076:2020/prA1
ICS:
53.020.20 Dvigala Cranes
SIST EN 17076:2021/oprA1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 17076:2021/oprA1:2023

---------------------- Page: 2 ----------------------
SIST EN 17076:2021/oprA1:2023


DRAFT
EUROPEAN STANDARD
EN 17076:2020
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
November 2022
ICS 53.020.20
English Version

Tower cranes - Anti-collision systems - Safety
requirements
Grues à tour - Systèmes anti-collision - Prescriptions de Turmdrehkrane - Antikollisionssysteme -
sécurité Sicherheitstechnische Anforderungen
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 147.

This draft amendment A1, if approved, will modify the European Standard EN 17076:2020. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17076:2020/prA1:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 17076:2021/oprA1:2023
prEN 17076:2020/prA1:2022 (E)
Contents Page
European foreword . 3
1 Modification to Clause 4, “List of significant hazards” . 4
2 Modification to Subclause 5.1.1, “Components of anti-collision devices and systems” . 5
3 Modification to Subclause 6.9, “Outside indicators”. 5
4 Modification to Clause 7, “Verification of the safety requirement and/or protective
measures” . 5
5 Modification to Annex ZA (informative), “Relationship between this European
Standard and the essential requirements of Directive 2006/42/EC aimed to be
covered” . 6

2

---------------------- Page: 4 ----------------------
SIST EN 17076:2021/oprA1:2023
prEN 17076:2020/prA1:2022 (E)
European foreword
This document (EN 17076:2020/prA1:2022) has been prepared by Technical Committee CEN/TC 147
“Cranes - Safety”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s) / Regulation(s).
For relationship with EU Directive(s) / Regulation(s), see informative Annexe ZA, which is an integral
part of EN 17076:2020.
3

---------------------- Page: 5 ----------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.