iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 17892-11:2019

(Main)

Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability tests (ISO 17892-11:2019)

Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability tests (ISO 17892-11:2019)

This document specifies methods for the laboratory determination of the water flow characteristics in soil.
This document is applicable to the laboratory determination of the coefficient of permeability of soil within the scope of geotechnical investigations.
NOTE       This document fulfils the requirements of the determination of the coefficient of permeability of soils in the laboratory for geotechnical investigation and testing in accordance with EN 1997-1 and EN 1997-2.

Geotechnische Erkundung und Untersuchung - Laborversuche an Bodenproben - Teil 11: Bestimmung der Wasserdurchlässigkeit (ISO 17892-11:2019)

Reconnaissance et essais géotechniques - Essais de laboratoire sur les sols - Partie 11: Essais de perméabilité (ISO 17892-11:2019)

Le présent document spécifie des méthodes pour la détermination au laboratoire des caractéristiques de circulation de l'eau dans un sol.
Ce document s'applique à la détermination en laboratoire du coefficient de perméabilité d'un sol dans le cadre d'investigations géotechniques.
NOTE       Le présent document répond aux exigences applicables à la détermination du coefficient de perméabilité des sols en laboratoire pour la reconnaissance et les essais géotechniques conformément aux normes EN 1997-1 et EN 1997-2.

Geotehnično preiskovanje in preskušanje - Laboratorijsko preskušanje zemljin - 11. del: Ugotavljanje prepustnosti (ISO 17892-11:2019)

Ta dokument določa metode za laboratorijsko določevanje značilnosti pretoka vode
v zemljinah.
Ta dokument se uporablja za laboratorijsko določevanje koeficienta prepustnosti zemljin,
ki spada na področje uporabe geotehničnega preiskovanja.
OPOMBA: Ta dokument izpolnjuje zahteve za določevanje koeficienta prepustnosti zemljin v laboratoriju za geotehnično preiskovanje in preskušanje v skladu s standardoma EN 1997-1 in EN 1997-2.

General Information

Status
Published
Publication Date
26-Feb-2019
Withdrawal Date
30-Aug-2019
ICS
13.080.20 - Physical properties of soils
93.020 - Earthworks. Excavations. Foundation construction. Underground works
Technical Committee
CEN/TC 341 - Geotechnical Investigation and Testing
Drafting Committee
CEN/TC 341 - Geotechnical Investigation and Testing
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
27-Feb-2019
Due Date
15-Nov-2019
Completion Date
27-Feb-2019
Ref Project
SIST EN ISO 17892-11:2019 - Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability tests (ISO 17892-11:2019)

Relations

Replaces
CEN ISO/TS 17892-11:2004/AC:2005 - Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Determination of permeability by constant and falling head (ISO/TS 17892-11:2004)
Effective Date
06-Mar-2019
Replaces
CEN ISO/TS 17892-11:2004 - Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Determination of permeability by constant and falling head (ISO/TS 17892-11:2004)
Effective Date
30-Mar-2016

Buy Standard

EN ISO 17892-11:2019EN ISO 17892-11:2019
PreviousNext
Standard
EN ISO 17892-11:2019
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 17892-11:2019
01-maj-2019
1DGRPHãþD
SIST-TS CEN ISO/TS 17892-11:2004
SIST-TS CEN ISO/TS 17892-11:2004/AC:2010
*HRWHKQLþQRSUHLVNRYDQMHLQSUHVNXãDQMH/DERUDWRULMVNRSUHVNXãDQMH]HPOMLQ
GHO8JRWDYOMDQMHSUHSXVWQRVWL ,62
Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability
tests (ISO 17892-11:2019)
Geotechnische Erkundung und Untersuchung - Laborversuche an Bodenproben - Teil
11: Bestimmung der Wasserdurchlässigkeit (ISO 17892-11:2019)
Reconnaissance et essais géotechniques - Essais de laboratoire sur les sols - Partie 11:
Essais de perméabilité (ISO 17892-11:2019)
Ta slovenski standard je istoveten z: EN ISO 17892-11:2019
ICS:
13.080.20 Fizikalne lastnosti tal Physical properties of soils
93.020 Zemeljska dela. Izkopavanja. Earthworks. Excavations.
Gradnja temeljev. Dela pod Foundation construction.
zemljo Underground works
SIST EN ISO 17892-11:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 17892-11:2019

---------------------- Page: 2 ----------------------

SIST EN ISO 17892-11:2019


EN ISO 17892-11
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2019
EUROPÄISCHE NORM
ICS 13.080.20; 93.020 Supersedes CEN ISO/TS 17892-11:2004
English Version

Geotechnical investigation and testing - Laboratory testing
of soil - Part 11: Permeability tests (ISO 17892-11:2019)
Reconnaissance et essais géotechniques - Essais de Geotechnische Erkundung und Untersuchung -
laboratoire sur les sols - Partie 11: Essais de Laborversuche an Bodenproben - Teil 11: Bestimmung
perméabilité (ISO 17892-11:2019) der Wasserdurchlässigkeit (ISO 17892-11:2019)
This European Standard was approved by CEN on 8 February 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17892-11:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 17892-11:2019
EN ISO 17892-11:2019 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 17892-11:2019
EN ISO 17892-11:2019 (E)
European foreword
This document (EN ISO 17892-11:2019) has been prepared by Technical Committee ISO/TC 182
"Geotechnics" in collaboration with Technical Committee CEN/TC 341 “Geotechnical Investigation and
Testing” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2019, and conflicting national standards shall
be withdrawn at the latest by August 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TS 17892-11:2004.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the U
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 17892-1:2014/A1:2022(Amendment)
Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content - Amendment 1 (ISO 17892-1:2014/Amd 1:2022)
SIST EN ISO 17892-1:2015/A1:2022
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17892-12:2018/A2:2022(Amendment)
Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits - Amendment 2 (ISO 17892-12:2018/Amd 2:2022)
SIST EN ISO 17892-12:2018/A2:2022
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17892-12:2018/A1:2021(Amendment)
Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits - Amendment 1 (ISO 17892-12:2018/Amd 1:2021)
SIST EN ISO 17892-12:2018/A1:2021

This document specifies methods for the determination of the liquid and plastic limits of a soil. These comprise two of the Atterberg limits for soils.
The liquid limit is the water content at which a soil changes from the liquid to the plastic state.
This document describes the determination of the liquid limit of a specimen of natural soil, or of a specimen of soil from which material larger than about 0,4 mm has been removed. This document describes two methods: the fall cone method and the Casagrande method.
NOTE The fall cone method in this document should not be confused with that of ISO 17892‑6.
The plastic limit of a soil is the water content at which a soil ceases to be plastic when dried further.
The determination of the plastic limit is normally made in conjunction with the determination of the liquid limit. It is recognized that the results of the test are subject to the judgement of the operator, and that some variability in results will occur.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18674-4:2020(Main)
Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 4: Measurement of pore water pressure: Piezometers (ISO 18674-4:2020)
SIST EN ISO 18674-4:2020

This document specifies the measurement of pore water pressures and piezometric levels in saturated ground by means of piezometers installed for geotechnical monitoring. General rules of performance monitoring of the ground, of structures interacting with the ground, of geotechnical fills and of geotechnical works are presented in ISO 18674‑1.
If applied in conjunction with ISO 18674-5, the procedures described in this document allow the determination of effective stresses acting in the ground.
This document is applicable to:
—     monitoring of water pressures acting on and in geotechnical structures (e.g. quay walls, dikes, excavation walls, foundations, dams, tunnels, slopes, embankments, etc.);
—     monitoring of consolidation processes of soil and fill (e.g. beneath foundations and in embankments);
—     evaluating stability and serviceability of geotechnical structures;
—     checking geotechnical designs in connection with the Observational Design procedure.
NOTE    This document fulfils the requirements for the performance monitoring of the ground, of structures interacting with the ground and of geotechnical works by the means of piezometers, installed as part of the geotechnical investigation and testing in accordance with References [4] and [5] This document relates to measuring devices, which are installed in the ground. For pore water pressure measurements carried out in connection with cone penetration tests, see ISO 22476-1.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18674-3:2017/A1:2020(Amendment)
Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 3: Measurement of displacements across a line: Inclinometers - Amendment 1 (ISO 18674-3:2017/Amd 1:2020)
SIST EN ISO 18674-3:2018/A1:2020
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18674-5:2019(Main)
Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 5: Stress change measurements by total pressure cells (TPC) (ISO 18674-5:2019)
SIST EN ISO 18674-5:2019

This document specifies the measurement of stress changes by means of total pressure cells (TPC). General rules of performance monitoring of the ground, of structures interacting with the ground, of geotechnical fills and of geotechnical works are presented in ISO 18674‑1.
If applied in conjunction with ISO 18674‑4, this document allows the determination of effective stress acting in the ground.
This document is applicable to:
—          monitoring changes of the state of stress in the ground and in geo-engineered structures (e.g. in earth fill dams or tunnel lining);
—          monitoring contact pressures at the interface between two media (e.g. earth pressure on retaining wall; contact pressure at the base of a foundation);
—          checking geotechnical designs and adjustment of construction in connection with the Observational Design procedure;
—          evaluating stability during or after construction.
Guidelines for the application of TPC in geotechnical engineering are presented in Annex B.
NOTE       This document fulfils the requirements for the performance monitoring of the ground, of structures interacting with the ground and of geotechnical works by the means of total pressure cells as part of the geotechnical investigation and testing according to EN 1997-1[1] and EN 1997-2[2].

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17892-10:2018(Main)
Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests (ISO 17892-10:2018)
SIST EN ISO 17892-10:2019

This document specifies two laboratory test methods for the determination of the effective shear strength of soils under consolidated drained conditions using either a shearbox or a ring shear device.
This document is applicable to the laboratory determination of effective shear strength parameters for soils in direct shear within the scope of geotechnical investigations.
The tests included in this document are for undisturbed, remoulded, re-compacted or reconstituted soils. The procedure describes the requirements of a determination of the shear resistance of a specimen under a single vertical (normal) stress. Generally three or more similar specimens from one soil are prepared for shearing under three or more different vertical pressures to allow the shear strength parameters to be determined in accordance with Annex B.
Special procedures for preparation and testing the specimen, such as staged loading and pre-shearing or for interface tests between soils and other materials, are not covered in the procedure of this document.
NOTE       This document fulfils the requirements of the determination of the drained shear strength of soils in direct shear for geotechnical investigation and testing in accordance with EN 1997-1 and EN 1997-2.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17892-12:2018(Main)
Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits (ISO 17892-12:2018)
SIST EN ISO 17892-12:2018

This document specifies methods for the determination of the liquid and plastic limits of a soil. These comprise two of the Atterberg limits for soils.
The liquid limit is the water content at which a soil changes from the liquid to the plastic state.
This document describes the determination of the liquid limit of a specimen of natural soil, or of a specimen of soil from which material larger than about 0,4 mm has been removed. This document describes two methods: the fall cone method and the Casagrande method.
NOTE       The fall cone method in this document should not be confused with that of ISO 17892‑6.
The plastic limit of a soil is the water content at which a soil ceases to be plastic when dried further.
The determination of the plastic limit is normally made in conjunction with the determination of the liquid limit. It is recognized that the results of the test are subject to the judgement of the operator, and that some variability in results will occur.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17892-9:2018(Main)
Geotechnical investigation and testing - Laboratory testing of soil - Part 9: Consolidated triaxial compression tests on water saturated soils (ISO 17892-9:2018)
SIST EN ISO 17892-9:2018

ISO 17892-9:2018 specifies a method for consolidated triaxial compression tests on water-saturated soils.
ISO 17892-9:2018 is applicable to the laboratory determination of triaxial shear strength under compression loading within the scope of geotechnical investigations.
The cylindrical specimen, which can comprise undisturbed, re-compacted, remoulded or reconstituted soil, is subjected to an isotropic or an anisotropic stress under drained conditions and thereafter is sheared under undrained or drained conditions. The test allows the determination of shear strength, stress-strain relationships and effective stress paths. All stresses and strains are denoted as positive numerical values in compression.
NOTE 1    This document provides a test for a single specimen. A set of at least three relatable tests are required to determine the shear strength parameters from these tests. Procedures for evaluating the results are included in Annex B and, where required, the shear strength parameters are to be included in the report.
Special procedures such as:
a)    tests with lubricated ends;
b)    multi-stage tests;
c)    tests with zero lateral strain (K0) consolidation;
d)    tests with local measurement of strain or local measurement of pore pressure;
e)    tests without rubber membranes;
f)     extension tests;
g)    shearing where cell pressure varies,
are not fully covered in this procedure. However, these specific tests can refer to general procedures described in this document.
NOTE 2    This document fulfils the requirements of consolidated triaxial compression tests for geotechnical investigation and testing in accordance with EN 1997‑1 and EN 1997‑2.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17892-8:2018(Main)
Geotechnical investigation and testing - Laboratory testing of soil - Part 8: Unconsolidated undrained triaxial test (ISO 17892-8:2018)
SIST EN ISO 17892-8:2018

ISO 17892-8:2018 specifies a method for unconsolidated undrained triaxial compression tests.
ISO 17892-8:2018 is applicable to the laboratory determination of undrained triaxial shear strength under compression loading within the scope of geotechnical investigations.
The cylindrical specimen, which can comprise undisturbed, re-compacted, remoulded or reconstituted soil, is subjected to an isotropic stress under undrained conditions and thereafter is sheared under undrained conditions. The test allows the determination of shear strength and stress-strain relationships in terms of total stresses.
Non-standard procedures such as tests with the measurement of pore pressure or tests with filter drains are not covered in this document.
NOTE       This document fulfils the requirements of unconsolidated undrained triaxial compression tests for geotechnical investigation and testing in accordance with EN 1997‑1 and EN 1997‑2.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day