CEN/TS 15365:2006
(Main)Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environment - Determination of creep behaviour by the cold end method
Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environment - Determination of creep behaviour by the cold end method
This document specifies the conditions for the determination of the tensile creep deformation and failure behaviour of single filaments of ceramic fibres at high temperature and under test conditions that prevent changes to the material as a result of chemical reaction with the test environment.
This document applies to continuous ceramic filaments taken from tows, yarns, braids and knittings, which have strains to fracture less than or equal to 5 %.
Hochleistungskeramik - Mechanische Eigenschaften von Keramikfasern bei hohen Temperaturen in einer reaktionsfreien Umgebung - Bestimmung des Kriechverhaltens im Kaltverbindungsverfahren
Céramiques techniques avancées - Propriétés mécaniques des fibres céramiques à haute température sous environnement non-réactif - Détermination du comportement au fluage par la méthode des mors froids
La présente Spécification technique prescrit les conditions permettant de déterminer la déformation de fluage en traction et le comportement à la rupture de monofilaments de fibres céramiques à température élevée et dans des conditions d’essai empêchant toute modification du matériau en raison de la réaction chimique avec le milieu d’essai.
Cette Spécification technique s’applique aux filaments céramiques continus issus de mèches, fils, tresses et tricots dont les contraintes à la rupture sont inférieures ou égales à 5 %.
Sodobna tehnična keramika – Mehanske lastnosti keramičnih vlaken pri visokih temperaturah v nereaktivnem okolju – Določitev lezenja po metodi hladnega spajanja (cold end method)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN/TS 15365:2006
01-julij-2006
6RGREQDWHKQLþQDNHUDPLND±0HKDQVNHODVWQRVWLNHUDPLþQLKYODNHQSULYLVRNLK
WHPSHUDWXUDKYQHUHDNWLYQHPRNROMX±'RORþLWHYOH]HQMDSRPHWRGLKODGQHJD
VSDMDQMD FROGHQGPHWKRG
Advanced technical ceramics - Mechanical properties of ceramic fibres at high
temperature in a non-reactive environment - Determination of creep behaviour by the
cold end method
Hochleistungskeramik - Mechanische Eigenschaften von Keramikfasern bei hohen
Temperaturen in einer reaktionsfreien Umgebung - Bestimmung des Kriechverhaltens im
Kaltverbindungsverfahren
Céramiques techniques avancées - Propriétés mécaniques des fibres céramiques a
haute température sous environnement non-réactif - Détermination du comportement au
fluage par la méthode des mors froids
Ta slovenski standard je istoveten z: CEN/TS 15365:2006
ICS:
81.060.30
SIST-TS CEN/TS 15365:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
TECHNICAL SPECIFICATION
CEN/TS 15365
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
March 2006
ICS 81.060.30
English Version
Advanced technical ceramics - Mechanical properties of ceramic
fibres at high temperature in a non-reactive environment -
Determination of creep behaviour by the cold end method
Céramiques techniques avancées - Propriétés mécaniques Hochleistungskeramik - Mechanische Eigenschaften von
des fibres céramiques à haute température sous Keramikfasern bei hohen Temperaturen in einer
environnement non-réactif - Détermination du reaktionsfreien Umgebung - Bestimmung des
comportement au fluage par la méthode des mors froids Kriechverhaltens im Kaltverbindungsverfahren
This Technical Specification (CEN/TS) was approved by CEN on 30 January 2006 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15365:2006: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
CEN/TS 15365:2006 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions.4
4 Principle.7
5 Significance and use .8
6 Apparatus .8
7 Test specimens .9
8 Test procedures .11
9 Calculation of results.14
10 Test report .15
Bibliography.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.