EN 13232-4:2023
(Main)Railway applications - Track - Switches and crossings for Vignole rails - Part 4: Actuation, locking and detection
Railway applications - Track - Switches and crossings for Vignole rails - Part 4: Actuation, locking and detection
This document determines the interface between moveable parts and the actuation, locking and detection equipment, and defines the basic criteria for switches and crossing with moveable parts in respect of the interface.
It concerns:
— rules, parameters and tolerances for alternative positions of the moveable parts;
— criteria and limits for the forces which move and restrain the moveable parts.
Bahnanwendungen - Oberbau - Weichen und Kreuzungen für Vignolschienen - Teil 4: Umstellung, Verriegelung und Lageprüfung
Dieses Dokument legt die Schnittstelle zwischen den beweglichen Bauteilen und den Umstellungs , Verriegelungs und Lageprüfungselementen fest und definiert die grundlegenden Kriterien für Weichen und Kreuzungen mit beweglichen Bauteilen bezüglich dieser Schnittstelle.
Das betrifft
— Grundsätze, Parameter und Grenzabweichungen für die wechselnden Stellungen der beweglichen Bauteile, und
— Kriterien und Begrenzungen der Kräfte, welche die beweglichen Bauteile bewegen und festhalten.
Applications ferroviaires - Voie - Appareils de voie pour rails Vignole - Partie 4 : Manœuvre, blocage et contrôle
Le présent document détermine l'interface entre les ensembles mobiles et l'équipement de manœuvre, de blocage et de contrôle. Il définit les critères de bases des appareils de voie à constituants mobiles (aiguillages et cœurs à pointes mobiles) en rapport à cette interface.
Il définit :
— les règles, les paramètres et les tolérances en fonction de la position des parties mobiles ;
— les critères et limites concernant les forces appliquées aux parties mobiles pour les déplacer et les immobiliser.
Železniške naprave - Zgornji ustroj proge - Kretnice in križišča za Vignolove tirnice - 4. del: Postavljalna naprava in kontrola lege ostrice
Ta evropski standard določa vmesnik med premičnimi deli ter postavljalno napravo in kontrolo lege ostrice ter opredeljuje osnovna merila za kretnice in križišča s premičnimi deli glede na vmesnik.
Standard obravnava:
– parametre in tolerance pravil za alternativne položaje premičnih delov;
– merila in omejitve za sile, ki omogočajo in omejujejo premikanje premičnih delov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13232-4:2023
01-december-2023
Železniške naprave - Zgornji ustroj proge - Kretnice in križišča za Vignolove tirnice
- 4. del: Postavljalna naprava in kontrola lege ostrice
Railway applications - Track - Switches and crossings for Vignole rails - Part 4:
Actuation, locking and detection
Bahnanwendungen - Oberbau - Weichen und Kreuzungen für Vignolschienen - Teil 4:
Umstellung, Verriegelung und Lageprüfung
Applications ferroviaires - Infrastructure - Appareils de voie - Partie 4: Manuvre, blocage
et contrôle
Ta slovenski standard je istoveten z: EN 13232-4:2023
ICS:
45.080 Tračnice in železniški deli Rails and railway
components
SIST EN 13232-4:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13232-4:2023
---------------------- Page: 2 ----------------------
SIST EN 13232-4:2023
EN 13232-4
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2023
EUROPÄISCHE NORM
ICS 93.100 Supersedes EN 13232-4:2005+A1:2011
English Version
Railway applications - Track - Switches and crossings for
Vignole rails - Part 4: Actuation, locking and detection
Applications ferroviaires - Voie - Appareils de voie Bahnanwendungen - Oberbau - Weichen und
pour rails Vignole - Partie 4 : Manœuvre, blocage et Kreuzungen für Vignolschienen - Teil 4: Umstellung,
contrôle Verriegelung und Lageprüfung
This European Standard was approved by CEN on 23 October 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13232-4:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13232-4:2023
EN 13232-4:2023 (E)
Contents Page
European foreword . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
3.1 General . 6
3.2 Actuation forces . 7
3.3 Geometrical parameters . 8
3.4 Movement and retention of switches and crossings with moveable parts . 12
3.5 Movement of switch rails . 13
3.6 Dynamics of the wheel . 14
4 Design criteria . 15
4.1 Parameters required . 15
4.2 C
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.