EN 1501-4:2023
(Main)Refuse collection vehicles - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles
Refuse collection vehicles - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles
This document provides all of the information required in order to perform efficiently, and in standardized conditions, the determination, the declaration and the verification of noise emission values of refuse collection vehicles.
The document ensures the reproducibility of the determination of noise emission values within the limits established for the accuracy grade of the basic standard used to determine noise emission values.
This document specifies the noise measurement conditions for the types of RCVs defined and described in the standards of the EN 1501:2021 series.
This document applies to machines which are manufactured after the date of approval of this document by CEN.
Noise emissions of mobile waste and recycling containers are excluded.
Abfallsammelfahrzeuge - Allgemeine Anforderungen und Sicherheitsanforderungen - Teil 4: Geräuschprüfverfahren für Abfallsammelfahrzeuge
Dieses Dokument stellt alle Informationen zur Verfügung, die erforderlich sind, um die Ermittlung, Angabe und Überprüfung der Geräuschemissionswerte von Abfallsammelfahrzeugen effizient und unter genormten Bedingungen durchzuführen.
Dieses Dokument stellt die Vergleichpräzision der Bestimmung von Geräuschemissionswerten innerhalb der für den Genauigkeitsgrad der zur Bestimmung der Geräuschemissionswerte verwendeten Norm festgelegten Grenzwerte sicher.
Dieses Dokument legt die Geräuschmessbedingungen für die Typen von Abfallsammelfahrzeugen fest, die in der Normenreihe EN 1501:2021 beschrieben sind.
Dieses Dokument gilt für Maschinen, die nach dem Datum der Zustimmung durch CEN zu diesem Dokument hergestellt wurden.
Geräuschemissionen von fahrbaren Abfall- und Wertstoffbehältern sind ausgeschlossen.
Véhicules de collecte de déchets - Exigences générales et exigences de sécurité - Partie 4 : Code d'essai acoustique des véhicules de collecte des déchets
Le présent document fournit toutes les informations nécessaires pour effectuer efficacement et dans des conditions normalisées la détermination, la déclaration et la vérification des valeurs d'émission sonore des véhicules de collecte de déchets spécifiés.
Le présent document assure que la détermination des valeurs d'émission sonore est reproductible dans les limites établies pour la classe de précision de la norme de base utilisée afin de déterminer les valeurs d'émission sonore.
Le présent document spécifie les conditions de mesurage du bruit des types de V.C.D. définis et décrits dans les normes de la série EN 1501:2021.
Le présent document s'applique aux machines construites après la date d'approbation du présent document par le CEN.
Les émissions sonores des conteneurs mobiles à ordures ou à déchets recyclables sont exclues de ce champ d'application.
Vozila za zbiranje odpadkov - Splošne in varnostne zahteve - 4. del: Navodilo za merjenje hrupa vozil za zbiranje odpadkov
Ta evropski standard vsebuje vse informacije, ki so potrebne za učinkovito določanje, deklaracijo in preverjanje vrednosti emisij hrupa vozil za zbiranje odpadkov v standardnih pogojih.
Uporaba tega dodatka zagotavlja ponovljivost določanja vrednosti emisij hrupa znotraj omejitev, določenih za razred točnosti osnovnega standarda, ki se uporablja za določanje vrednosti emisij hrupa. Metode, uporabljene za določanje teh vrednosti emisij hrupa, ki ustrezajo temu normativnemu dodatku, so merilne metode razreda točnosti 2.
Ta standard obravnava pogoje za merjenje hrupa za tipe vozil za zbiranje odpadkov, ki so opredeljeni in opisani v skupini standardov EN 1501.
Ta evropski standard se uporablja predvsem za stroje, ki so bili izdelani po tem, ko je CEN odobril ta standard.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 1501-4:2023
01-julij-2023
Vozila za zbiranje odpadkov - Splošne in varnostne zahteve - 4. del: Navodilo za
merjenje hrupa vozil za zbiranje odpadkov
Refuse collection vehicles - General requirements and safety requirements - Part 4:
Noise test code for refuse collection vehicles
Abfallsammelfahrzeuge - Allgemeine Anforderungen und Sicherheitsanforderungen -
Teil 4: Geräuschprüfverfahren für Abfallsammelfahrzeuge
Véhicules de collecte de déchets - Exigences générales et exigences de sécurité - Partie
4: Code d'essai acoustique des bennes de collecte des déchets
Ta slovenski standard je istoveten z: EN 1501-4:2023
ICS:
13.030.40 Naprave in oprema za Installations and equipment
odstranjevanje in obdelavo for waste disposal and
odpadkov treatment
17.140.30 Emisija hrupa transportnih Noise emitted by means of
sredstev transport
43.160 Vozila za posebne namene Special purpose vehicles
SIST EN 1501-4:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 1501-4:2023
---------------------- Page: 2 ----------------------
SIST EN 1501-4:2023
EN 1501-4
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2023
EUROPÄISCHE NORM
ICS 17.140.30; 43.160 Supersedes EN 1501-4:2007
English Version
Refuse collection vehicles - General requirements and
safety requirements - Part 4: Noise test code for refuse
collection vehicles
Véhicules de collecte de déchets - Exigences générales Abfallsammelfahrzeuge - Allgemeine Anforderungen
et exigences de sécurité - Partie 4 : Code d'essai und Sicherheitsanforderungen - Teil 4:
acoustique des véhicules de collecte des déchets Geräuschprüfverfahren für Abfallsammelfahrzeuge
This European Standard was approved by CEN on 17 April 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1501-4:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 1501-4:2023
EN 1501-4:2023 (E)
Contents Page
European foreword . 3
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Determination of the A-weighted emission sound pressure level(s) at working
station(s) . 8
4.1 General. 8
4.2 Measurement positions . 8
4.2.1 Working station(s) outside the cab . 8
4.2.2 Working station(s) in the cab .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.