EN ISO 13577-4:2022
(Main)Industrial furnaces and associated processing equipment - Safety - Part 4: Protective systems (ISO 13577-4:2022)
Industrial furnaces and associated processing equipment - Safety - Part 4: Protective systems (ISO 13577-4:2022)
This document specifies the requirements for protective systems used in industrial furnaces and associated processing equipment (TPE).
The functional requirements to which the protective systems apply are specified in ISO 13577-1 ISO 13577-2 and ISO 13577-3.
This document is not applicable to blast furnaces, converters (in steel plants), boilers, fired heaters (including reformer furnaces) in the petrochemical and chemical industries.
This document is not applicable to electrical cabling and power cabling upstream of the TPE control panel/protective system.
This document is not applicable to the protective systems manufactured before the date of its publication.
Industrielle Thermoprozessanlagen und zugehörige Prozesskomponenten - Sicherheitsanforderungen - Teil 4: Schutzsysteme (ISO 13577-4:2022)
Dieses Dokument legt die Anforderungen an Schutzsysteme fest, die in Industrieöfen und zugehörigen Prozessanlagen (TPE) verwendet werden.
Die funktionalen Anforderungen, die für Schutzsysteme gelten, werden in ISO 13577 1, ISO 13577 2 und ISO 13577 3 festgelegt.
Dieses Dokument gilt nicht für Hochöfen, Konverter (in Stahlwerken), Kessel, befeuerte Erhitzer (einschließlich Reformeröfen) in der petrochemischen und chemischen Industrie.
Dieses Dokument gilt nicht für die elektrische Verkabelung und die Leistungsverkabelung vor dem TPE-Schaltschrank/Schutzsystem.
Dieses Dokument gilt nicht für Schutzsysteme, die vor dem Datum seiner Veröffentlichung hergestellt wurden.
Fours industriels et équipements associés - Sécurité - Partie 4: Systèmes de protection (ISO 13577-4:2022)
Le présent document spécifie les spécifications relatives aux systèmes de protection utilisés dans des fours industriels et équipements associés (TPE).
Les spécifications fonctionnelles auxquelles s'appliquent les systèmes de protection sont spécifiées dans les ISO 13577‑1, ISO 13577‑2 et ISO 13577‑3.
Le présent document ne s'applique pas aux hauts fourneaux, aux convertisseurs (dans les aciéries), aux chaudières, aux appareils de chauffage (y compris les fours de reformage) dans les industries pétrochimiques et chimiques.
Le présent document n'est pas applicable au câblage électrique et au câblage de puissance en amont du panneau de commande/système de protection TPE.
Le présent document n'est pas applicable aux systèmes de protection fabriqués avant la date de sa publication.
Industrijske peči in pripadajoča procesna oprema - Varnost - 4. del: Zaščitni sistemi (ISO 13577-4:2022)
Ta del standarda ISO 13577 določa zahteve za zaščitne sisteme, ki se uporabljajo v industrijskih pečeh in pripadajoči procesni opremi (TPE).
Funkcionalne zahteve, ki se navezujejo na zaščitne sisteme, so določene v drugih delih standarda ISO 13577.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 13577-4:2022
01-september-2022
Industrijske peči in pripadajoča procesna oprema - Varnost - 4. del: Zaščitni
sistemi (ISO 13577-4:2022)
Industrial furnaces and associated processing equipment - Safety - Part 4: Protective
systems (ISO 13577-4:2022)
Industrielle Thermoprozessanlagen und dazugehörige Prozesskomponenten -
Sicherheitsanforderungen - Teil 4: Schutzsysteme (ISO 13577-4:2022)
Fours industriels et équipements associés - Sécurité - Partie 4: Systèmes de protection
(ISO 13577-4:2022)
Ta slovenski standard je istoveten z: EN ISO 13577-4:2022
ICS:
25.180.01 Industrijske peči na splošno Industrial furnaces in general
SIST EN ISO 13577-4:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 13577-4:2022
---------------------- Page: 2 ----------------------
SIST EN ISO 13577-4:2022
EN ISO 13577-4
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2022
EUROPÄISCHE NORM
ICS 13.100; 25.180.01
English Version
Industrial furnaces and associated processing equipment -
Safety - Part 4: Protective systems (ISO 13577-4:2022)
Fours industriels et équipements associés - Sécurité - Industrielle Thermoprozessanlagen und dazugehörige
Partie 4: Systèmes de protection (ISO 13577-4:2022) Prozesskomponenten - Sicherheitsanforderungen - Teil
4: Schutzsysteme (ISO 13577-4:2022)
This European Standard was approved by CEN on 27 June 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13577-4:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 13577-4:2022
EN ISO 13577-4:2022 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 13577-4:2022
EN ISO 13577-4:2022 (E)
European foreword
This document (EN ISO 13577-4:2022) has been prepared by Technical Committee ISO/TC 244
"Industrial furnaces and associated processing equipment" in collaboration with Technical Committee
CEN/TC 186 “Industrial thermoprocessing - Safety” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2023, and conflicting national standards shall
be withdrawn at the latest by January 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 13577-4:2022 has been approved by CEN as EN ISO 13577-4:2022 without any
modification.
3
---------------------- Page: 5 -------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.