iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

CEN/TR 13205-3:2014

(Main)

Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data

Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data

This Technical Report specifies evaluation methods for analysing the data obtained from a type A test of aerosol samplers under prescribed laboratory conditions as specified in prEN 13205-2:2012.
The methods can be applied to all samplers used for the health-related sampling of particles in workplace air.

Exposition am Arbeitsplatz - Beurteilung der Leistungsfähigkeit von Sammlern für die Messung der Konzentration luftgetragener Partikel - Teil 3: Analyse der Daten zum Probenahmewirkungsgrad

Exposition sur les lieux de travail - Évaluation des performances des instruments de mesurage des concentrations d'aérosols - Partie 3: Analyse des données d'efficacité de prélèvement

Le présent rapport technique spécifie des méthodes d'évaluation pour l'analyse des données obtenues à partir d'un essai type A pour des dispositifs de prélèvement d'aérosols dans des conditions de laboratoire prescrites, telles que spécifiées dans la prEN 13205-2:2012.
Ces méthodes peuvent être appliquées à tous les dispositifs de prélèvement utilisés pour le prélèvement, à des fins sanitaires, des particules présentes sur les lieux de travail.

Izpostavljenost na delovnem mestu - Ocenjevanje lastnosti merilnikov za merjenje koncentracij lebdečih delcev - 3. del: Analiza podatkov o učinkovitosti vzorčenja

CEN/TR 13205-3 določa metode ocenjevanja za analizo podatkov, pridobljenih pri preskusu tipa A za merilnike aerosolov pod laboratorijskimi pogoji, določenimi v standardu EN 13205-2. Metode veljajo za vse merilnike, ki se uporabljajo za vzorčenje delcev v zraku, ki vplivajo na zdravje na delovnem mestu.

General Information

Status
Published
Publication Date
24-Jun-2014
ICS
13.040.30 - Workplace atmospheres
Technical Committee
CEN/TC 137 - Assessment of workplace exposure
Drafting Committee
CEN/TC 137/WG 3 - Particulate matter
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
25-Jun-2014
Due Date
06-Apr-2013
Completion Date
25-Jun-2014
Ref Project
SIST-TP CEN/TR 13205-3:2014 - Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data

Relations

Replaces
EN 13205:2001 - Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
Effective Date
08-Jun-2022
Splited From
prEN 13205 - Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations
Effective Date
07-Mar-2023
Parent
prEN 13205 - Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations
Effective Date
29-Jun-2011

Buy Standard

TP CEN/TR 13205-3:2014TP CEN/TR 13205-3:2014
PreviousNext
Technical report
TP CEN/TR 13205-3:2014
English language
46 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN/TR 13205-3:2014
01-september-2014
1DGRPHãþD
SIST EN 13205:2002
,]SRVWDYOMHQRVWQDGHORYQHPPHVWX2FHQMHYDQMHODVWQRVWLPHULOQLNRY]DPHUMHQMH
NRQFHQWUDFLMOHEGHþLKGHOFHYGHO$QDOL]DSRGDWNRYRXþLQNRYLWRVWLY]RUþHQMD
Workplace exposure - Assessment of sampler performance for measurement of airborne
particle concentrations - Part 3: Analysis of sampling efficiency data
Exposition am Arbeitsplatz - Bewertung der Leistungsfähigkeit von Sammlern für die
Messung der Konzentration luftgetragener Partikel - Teil 3: Analyse der Daten zum
Probenahmewirkungsgrad
Exposition sur les lieux de travail - Évaluation des performances des instruments de
mesurage des concentrations d'aérosols - Partie 3: Analyse des données d'efficacité de
prélèvement
Ta slovenski standard je istoveten z: CEN/TR 13205-3:2014
ICS:
13.040.30 Kakovost zraka na delovnem Workplace atmospheres
mestu
SIST-TP CEN/TR 13205-3:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CEN/TR 13205-3:2014

---------------------- Page: 2 ----------------------

SIST-TP CEN/TR 13205-3:2014

TECHNICAL REPORT
CEN/TR 13205-3

RAPPORT TECHNIQUE

TECHNISCHER BERICHT
June 2014
ICS 13.040.30 Supersedes EN 13205:2001
English Version
Workplace exposure - Assessment of sampler performance for
measurement of airborne particle concentrations - Part 3:
Analysis of sampling efficiency data
Exposition sur les lieux de travail - Évaluation des Exposition am Arbeitsplatz - Beurteilung der
performances des instruments de mesurage des Leistungsfähigkeit von Sammlern für die Messung der
concentrations d'aérosols - Partie 3: Analyse des données Konzentration luftgetragener Partikel - Teil 3: Analyse der
d'efficacité de prélèvement Daten zum Probenahmewirkungsgrad


This Technical Report was approved by CEN on 14 January 2013. It has been drawn up by the Technical Committee CEN/TC 137.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 13205-3:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TP CEN/TR 13205-3:2014
CEN/TR 13205-3:2014 (E)
Contents Page

Foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Symbols and abbreviations . 5
4.1 Symbols . 5
4.1.1 Latin . 5
4.1.2 Greek . 10
4.2 Enumerating subscripts . 11
4.3 Abbreviations . 12
5 Analysis of sampling efficiency data from a performance test according EN 13205-2. 12
5.1 General .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 23861:2022(Main)
Workplace air - Chemical agent present as a mixture of airborne particles and vapour - Requirements for evaluation of measuring procedures using samplers (ISO 23861:2022)
SIST EN ISO 23861:2023

This document specifies requirements for the evaluation of measuring procedures using samplers for the determination of a chemical agent present in the workplace atmosphere as a mixture of airborne particles and vapour.
The procedures given in this document provide results only for the sum of airborne particles and vapour. The concentration is calculated in terms of mass per unit volume.
NOTE      The physical behaviour of a mixture of airborne particles and vapour is described in Annex A. Examples of substances which can be present in multiple phases are toluene diisocyanate, diethanolamine, ethyleneglycol and tributylphosphate.
This document can also be applied to complex mixtures, such as metal working fluids or bitumen fumes.
This document is applicable to samplers and measuring procedures using these samplers in which sampling and analysis are carried out in separate stages.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13137:2022(Main)
Workplace atmospheres - Pumps for personal sampling of chemical and biological agents - Requirements and test methods (ISO 13137:2022)
SIST EN ISO 13137:2023

This document specifies performance requirements for battery powered pumps used for personal sampling of chemical and biological agents in workplace air. It also specifies test methods in order to determine the performance characteristics of such pumps under prescribed laboratory conditions.
This document is applicable to battery powered pumps having a nominal volumetric flow rate above 10 ml ⋅ min−1, as used with combinations of sampler and collection substrate for sampling of gases, vapours, dusts, fumes, mists and fibres.
This document is primarily intended for flow-controlled pumps.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23320:2022(Main)
Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using diffusive samplers (ISO 23320:2022)
SIST EN ISO 23320:2022

This document specifies performance requirements and test methods under prescribed laboratory conditions for the evaluation of diffusive samplers (see Reference [1]) and of procedures using these samplers for the determination of gases and vapours in workplace atmospheres (see Reference [2]).
This document is applicable to diffusive samplers and measuring procedures using these samplers, such as ISO 16200‑2 and ISO 16017‑2, in which sampling and analysis are carried out in separate stages.
This document is not applicable to
—    diffusive samplers which are used for the direct determination of concentrations, and
—    diffusive samplers which rely on sorption into a liquid.
This document addresses requirements for method developers and/or manufacturers.
NOTE      For the purposes of this document a manufacturer can be any commercial or non-commercial entity.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1540:2021(Main)
Workplace exposure - Terminology
SIST EN 1540:2022

This document specifies terms and definitions that are related to the assessment of workplace exposure to chemical and biological agents. These are either general terms or terms which are specific to physical and chemical processes of air sampling, the analytical method or method performance.
The terms included are those that have been identified as being fundamental because their definition is necessary to avoid ambiguity and ensure consistency of use.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14583:2021(Main)
Workplace exposure - Volumetric bioaerosol samplers - General requirements and evaluation of performance
SIST EN 14583:2022

This document specifies general requirements for the evaluation of volumetric bioaerosol samplers in order to assess workplace exposure and their physical and biological performance.
This document describes the procedures for the development of volumetric bioaerosol samplers as well as their properties and validation.
This document provides a description of a test facility and selection criteria for microbial strains that can be used to assess their biological performance.
This document addresses requirements to manufacturers and developers of volumetric bioaerosol samplers as well as to test facilities with the equipment and skills to carry out the performance measurements of these samplers (see Annex D for application guidance).
This document is not intended for operators who use volumetric bioaerosol samplers to carry out exposure measurements for workers at occupational settings.
This document is not applicable for clean room measurements other than for occupational safety.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14031:2021(Main)
Workplace exposure - Quantitative measurement of airborne endotoxins
SIST EN 14031:2021

This document specifies methods for the quantitative measurement of airborne endotoxins and gives general requirements for sampling on filters, transportation, storage as well as the analysis of samples.
This document provides also guidelines for the assessment of workplace exposure to airborne endotoxins.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 482:2021(Main)
Workplace exposure - Procedures for the determination of the concentration of chemical agents - Basic performance requirements
SIST EN 482:2021

This document specifies basic performance requirements for procedures for the determination of the concentration of chemical agents in workplace atmospheres as required by the Chemical Agents Directive 98/24/EC [13]. These requirements apply to all steps of measuring procedures regardless of the physical form of the chemical agent (gas, vapour, airborne particles), measuring procedures with separate sampling and analytical methods, and direct-reading instruments.
This document specifies requirements that are fulfilled by measuring procedures when tested under prescribed laboratory conditions due to a wide range of environmental conditions encountered in practice.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17289-2:2020(Main)
Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 2: Calculation method
SIST EN 17289-2:2021

This document specifies the determination of the size-weighted fine fraction (SWFF) and the size-weighted fine fraction of crystalline silica (SWFFCS) in bulk materials by calculation. The document also specifies the assumptions and preconditions to be fulfilled for this method to be valid.
The purpose of this document is to allow users to evaluate bulk materials regarding their size-weighted fine fraction and crystalline silica content.
NOTE   For preparation of the sample and determination of crystalline silica by X-ray Powder Diffractometry (XRD) or Fourier Transform Infrared Spectroscopy (FT-IR), see EN 17289-1.
The calculation method is applicable only after experiments have shown that the results are accurate and consistently equal or higher than the results from sedimentation, as specified in EN 17289 3, for that particular bulk material.
A specific method for the evaluation of the SWFF for diatomaceous earth bulk materials is given in Annex A. Due to the internal porosity of diatomaceous earth, the general instructions given in this document are adapted in order to take into account the material’s effective density.
This document is applicable for crystalline silica containing bulk materials which have been fully investigated and validated for the evaluation of the size-weighted fine fraction and crystalline silica.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17289-3:2020(Main)
Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 3: Sedimentation method
SIST EN 17289-3:2021

This document specifies the determination of the size-weighted fine fraction (SWFF) and the size-weighted fine fraction of crystalline silica (SWFFCS) in bulk materials by means of a sedimentation method using a liquid sedimentation technique.
The purpose of this document is to allow users to evaluate bulk materials with regard to their size-weighted fine fraction and crystalline silica content.
NOTE   For preparation of the sample and determination of crystalline silica by X-ray Powder Diffractometry (XRD) or Fourier Transform Infrared Spectroscopy (FT-IR) see EN 17289-1.
Specific methods for the evaluation of SWFF for specific bulk materials are specified in several annexes.
This document is applicable for crystalline silica containing bulk materials which have been fully investigated and validated for the evaluation of the size-weighted fine fraction and crystalline silica.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17289-1:2020(Main)
Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 1: General information and choice of test methods
SIST EN 17289-1:2021

This document specifies the requirements and choice of test method for the determination of the size-weighted fine fraction (SWFF) and the size-weighted fine fraction of crystalline silica (SWFFCS) in bulk materials.
This document gives also guidance on the preparation of the sample and determination of crystalline silica by X-ray Powder Diffractometry (XRD) and Fourier Transform Infrared Spectroscopy (FT-IR).
NOTE    EN 17289-2 specifies a method to calculate the size-weighted fine fraction from a measured particle size distribution and assumes that the particle size distribution of the crystalline silica particles is the same as the other particles present in the bulk material. EN 17289-3 specifies a method using a liquid sedimentation technique to determine the size-weighted fine fraction of crystalline silica. Both methods are based upon a number of limitations and assumptions, which are listed in EN 17289-2 and EN 17289-3, respectively. The method in EN 17289-3 can also be used for other constituents than CS, if investigated and validated.
This document is applicable for crystalline silica containing bulk materials which have been fully investigated and validated for the evaluation of the size-weighted fine fraction and crystalline silica.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day