EN 12953-3:2016
(Main)Shell boilers - Part 3: Design and calculation for pressure parts
Shell boilers - Part 3: Design and calculation for pressure parts
This Part of this European Standard specifies requirements for the design and calculation of pressure parts of shell boilers as defined in EN 12953 1.
NOTE For other components such as economisers, superheaters, tube walls, headers, reference should be made to EN 12952 series.
Großwasserraumkessel - Teil 3: Konstruktion und Berechnung für drucktragende Teile
Dieser Teil der Europäischen Norm legt Anforderungen an die Konstruktion und die Berechnung von druck¬tragenden Teilen für die in EN 12953 1 definierten Großwasserraumkessel fest.
Für andere Komponenten, wie z. B. Wasserrohrwände, sollte die Normenreihe EN 12952 in Bezug genommen werden.
Chaudières à tubes de fumée - Partie 3: Conception et calcul des parties sous pression
La présente partie de la Norme européenne spécifie les exigences de conception et de calcul des parties sous pression des chaudières à tubes de fumée telles que définies dans l’EN 12953 1.
Pour les autres composants, tels que les parois à tubes d'eau, il convient de se référer à la série EN 12952.
Mnogovodni kotli - 3. del: Konstruiranje in izračun tlačno obremenjenih delov
Ta del tega evropskega standarda določa zahteve za konstruiranje in izračun tlačno obremenjenih delov mnogovodnih kotlov iz standarda EN 12953 1.
OPOMBA: Za druge sestavne dele, kot so ekonomizerji, grelci, cevne stene, kompenzacijski rezervoarji, glej skupino standardov EN 12952.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 12953-3:2016
01-junij-2016
1DGRPHãþD
SIST EN 12953-3:2002
0QRJRYRGQLNRWOLGHO.RQVWUXLUDQMHLQL]UDþXQWODþQRREUHPHQMHQLKGHORY
Shell boilers - Part 3: Design and calculation for pressure parts
Großwasserraumkessel - Teil 3: Konstruktion und Berechnung für drucktragende Teile
Chaudières à tube de fumée - Partie 3: Conception et calcul des parties sous pression
Ta slovenski standard je istoveten z: EN 12953-3:2016
ICS:
27.060.30 Grelniki vode in prenosniki Boilers and heat exchangers
toplote
SIST EN 12953-3:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 12953-3:2016
---------------------- Page: 2 ----------------------
SIST EN 12953-3:2016
EN 12953-3
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2016
EUROPÄISCHE NORM
ICS 27.060.30; 27.100 Supersedes EN 12953-3:2002
English Version
Shell boilers - Part 3: Design and calculation for pressure
parts
Chaudières à tubes de fumée - Partie 3: Conception et Großwasserraumkessel - Teil 3: Konstruktion und
calcul des parties sous pression Berechnung für drucktragende Teile
This European Standard was approved by CEN on 23 January 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12953-3:2016 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 12953-3:2016
EN 12953-3:2016 (E)
Contents Page
European foreword . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Symbols and abbreviations . 8
5 General . 8
5.1 Boilers . 8
5.2 Hot-water boilers . 8
5.3 Main welds . 8
5.4 Weld factor . 9
5.5 Thermal design of furnaces tubes . 9
5.5.1 Design conditions . 9
5.5.2 Furnace dimensions .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.