iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

CEN/TS 16428:2012

(Main)

Biometrics Interoperability profiles - Best Practices for slap tenprint captures

Biometrics Interoperability profiles - Best Practices for slap tenprint captures

The main goal of this Technical Specification is to give guidelines to follow during the acquisition process of slap tenprints in order to obtain fingerprints with the best quality possible in acceptable time constraints.
NOTE   Non-cooperative users are out of the scope of this Technical Specification.
When using ten-fingerprint sensors, it is fundamental to know how to use them and how to proceed during the acquisition. This Technical Specification describes how to capture fingerprints correctly by specifying best practices for slap ten-print captures.
This Technical Specification gives guidance on the following topics:
1)   Recommendations on the hardware of the fingerprint sensor and its deployment,
2)   Recommendations on user guidance,
3)   Recommendations on the enrolment process including a sample workflow,
4)   Recommendations for developers and system integrators on application software,
5)   Recommendations on processing, compression and coding of the acquired fingerprint images,
6)   Recommendations on operational issues and data logging,
7)   Recommendations on the evaluation of a solution and its components.
Although this Technical Specification primarily focuses on reaching optimal data quality for enrolment purposes, the recommendations given here are applicable for other purposes. All processes which rely on good quality tenprint slaps can take advantage of the best practices reported here.

Profile für die biometrische Interoperabilität - Optimales Vorgehen bei Erfassung aller Finger mittels gleichzeitigem Auflegen

Interopérabilité des profils biométriques - Recommandations pour la capture de dix empreintes digitales à plat

Interoperabilnost biometričnih profilov - Najboljše prakse za zajeme desetprstnih odtisov dlani

Glavni cilj te tehnične specifikacije je podati smernice, ki jih je treba upoštevati med postopkom zajemanja desetprstnih odtisov dlani, da se v sprejemljivem omejenem času pridobijo čim bolj kakovostni prstni odtisi. Pri uporabi senzorjev za desetprstne odtise je ključnega pomena seznanjenost z njihovo uporabo in poznavanje nadaljnjih postopkov med zajemanjem. Ta tehnična specifikacija z opredelitvijo najboljših praks za zajeme desetprstnih odtisov dlani opisuje, kako pravilno zajeti prstne odtise. Ta tehnična specifikacija vsebuje navodila v zvezi z naslednjimi temami: 1) priporočila v zvezi s strojno opremo senzorja za prstne odtise in njegovo uporabo, 2) priporočila v zvezi z navodili za uporabnike, 3) priporočila v zvezi s postopkom vnašanja, vključno z vzorčnim potekom dela, 4) priporočila za razvijalce in sistemske integratorje v zvezi z aplikativno programsko opremo, 5) priporočila v zvezi z obdelavo, kompresijo in kodiranjem zajetih slik prstnih odtisov, 6) priporočila v zvezi z operativnimi vprašanji in beleženjem podatkov, 7) priporočila v zvezi z oceno rešitve in njenimi sestavnimi deli. Čeprav se ta tehnična specifikacija osredotoča predvsem na doseganje optimalne kakovosti podatkov za namene vnašanja, se navedena priporočila uporabljajo za druge namene. V tem dokumentu opisane najboljše prakse se lahko vključi v vse postopke, ki se zanašajo na desetprstne odtise dlani dobre kakovosti.

General Information

Status
Published
Publication Date
23-Oct-2012
ICS
35.240.15 - Identification cards. Chip cards. Biometrics
Technical Committee
CEN/TC 224 - Machine-readable cards, related device interfaces and operations
Drafting Committee
CEN/TC 224/WG 18 - Interoperability of biometric recorded data
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
02-Sep-2023
Completion Date
02-Sep-2023
Mandate
M/460 - Standardisation Mandate to the European Standardisation Organizations CEN, CENELEC and ETSI in the field of Information and Communication Technologies applied to Electronic Signatures
Ref Project
SIST-TS CEN/TS 16428:2013 - Biometrics Interoperability profiles - Best Practices for slap tenprint captures

Buy Standard

TS CEN/TS 16428:2013TS CEN/TS 16428:2013
PreviousNext
Technical specification
TS CEN/TS 16428:2013
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
TS CEN/TS 16428:2013 - BARVETS CEN/TS 16428:2013 - BARVE
PreviousNext
Technical specification
TS CEN/TS 16428:2013 - BARVE
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 16428:2013
01-januar-2013
0HGREUDWRYDOQRVWELRPHWULþQLKSURILORY1DMEROMãHSUDNVH]D]DMHPHGHVHWSUVWQLK
RGWLVRYGODQL
Biometrics Interoperability profiles - Best Practices for slap tenprint captures
Profile für biometrische Interoperabilität - Optimales Vorgehen bei Erfassung aller Finger
mittels gleichzeitigem Auflegen
Interopérabilité des profils biométriques - Recommandations pour la capture de dix
empreintes digitales à plat
Ta slovenski standard je istoveten z: CEN/TS 16428:2012
ICS:
35.240.15 Identifikacijske kartice in Identification cards and
sorodne naprave related devices
SIST-TS CEN/TS 16428:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 16428:2013

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 16428:2013


TECHNICAL SPECIFICATION
CEN/TS 16428

SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION
October 2012
ICS 35.240.15
English Version
Biometrics Interoperability profiles - Best Practices for slap
tenprint captures
Interopérabilité des profils biométriques - Profile für die biometrische Interoperabilität - Optimales
Recommandations pour la capture de dix empreintes Vorgehen bei Erfassung aller Finger mittels gleichzeitigem
digitales à plat Auflegen
This Technical Specification (CEN/TS) was approved by CEN on 27 August 2012 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 16428:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 16428:2013
CEN/TS 16428:2012 (E)
Contents Page
Foreword .3
1 Scope .4
2 Sensor hardware requirement .5
3 Acquisition software .5
4 Logging and evaluation of data .7
5 Operational process .9
6 Operational issues . 12
Annex A (informative) Example of acquisition process . 15
Annex B (informative) Example of an acquisition process based on composite records . 16
Annex C (informative) Example of a quality metric for the acquisition process . 19
Bibliography . 20

2

---------------------- Page: 4 ----------------------

SIST-TS CEN/TS 16428:2013
CEN/TS 16428:2012 (E)
Foreword
This document (CEN/TS 16428:2012) has been prepared by Technical Committee CEN/TC 224 “Personal
identification, electronic signature and cards and their related systems and operations”, the secretariat of
which is held by AFNOR.
Attention is drawn to the possibility t
...

SLOVENSKI STANDARD
SIST-TS CEN/TS 16428:2013
01-januar-2013
Interoperabilnost biometričnih profilov - Najboljše prakse za zajeme desetprstnih
odtisov dlani
Biometrics Interoperability profiles - Best Practices for slap tenprint captures
Profile für biometrische Interoperabilität - Optimales Vorgehen bei Erfassung aller Finger
mittels gleichzeitigem Auflegen
Interopérabilité des profils biométriques - Recommandations pour la capture de dix
empreintes digitales à plat
Ta slovenski standard je istoveten z: CEN/TS 16428:2012
ICS:
35.240.15 Identifikacijske kartice. Čipne Identification cards. Chip
kartice. Biometrija cards. Biometrics
SIST-TS CEN/TS 16428:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 16428:2013

---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 16428:2013


TECHNICAL SPECIFICATION
CEN/TS 16428

SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION
October 2012
ICS 35.240.15
English Version
Biometrics Interoperability profiles - Best Practices for slap
tenprint captures
Interopérabilité des profils biométriques - Profile für die biometrische Interoperabilität - Optimales
Recommandations pour la capture de dix empreintes Vorgehen bei Erfassung aller Finger mittels gleichzeitigem
digitales à plat Auflegen
This Technical Specification (CEN/TS) was approved by CEN on 27 August 2012 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 16428:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 16428:2013
CEN/TS 16428:2012 (E)
Contents Page
Foreword .3
1 Scope .4
2 Sensor hardware requirement .5
3 Acquisition software .5
4 Logging and evaluation of data .7
5 Operational process .9
6 Operational issues . 12
Annex A (informative) Example of acquisition process . 15
Annex B (informative) Example of an acquisition process based on composite records . 16
Annex C (informative) Example of a quality metric for the acquisition process . 19
Bibliography . 20

2

---------------------- Page: 4 ----------------------
SIST-TS CEN/TS 16428:2013
CEN/TS 16428:2012 (E)
Foreword
This document (CEN/TS 16428:2012) has been prepared by Technical Committee CEN/TC 224 “Personal
identification, electronic signature and cards and their related systems and operations”, the secretariat of
which is held by AFNOR.
Attention is drawn to the possib
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TR 18030:2023(Main)
Personal identification - Biometrics - Overview of biometric verification systems implemented across Europe
SIST-TP CEN/TR 18030:2024

This Technical Report provides an overview of the current deployment of biometric systems within Europe. It addresses the challenges that are being faced, in order to detect the current needs for improving the specifications for the implementation and deployment of biometric systems. This Technical Report considers all kind of deployments, from border control to ad-hoc services. As most of the deployed systems are based on the use of fingerprints or face recognition, this Technical Report will focus on these two biometric modalities, from the system integrator and interoperability points of view.
Identity documents, in terms of production, structure, interoperability, etc., are out of the scope of this TR. The TR is focused on the performance at system level.
The current European legislative initiatives around this topic (e.g., Entry/Exit System, framework for interoperability between EU information systems, etc.) need a robust framework study about the availability of standard technologies to improve interoperability in biometric products around the European Union.
By showing these needs, a set of recommendations for future standardization works is provided.
From a methodological perspective, the report gathers information of different entities with this classification:
- Capture/enrolment of biometrics including the quality assurance and the generation of feature or biometric models from the images.
- Best practices and guidelines to use biometrics in Europe.
- Data Quality environment using biometrics in European networks.

  • Technical report
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 17982:2023(Main)
European Digital Identity Wallets standards Gap Analysis
SIST-TP CEN/TR 17982:2024

This document identifies relevant existing standards and standards work in progress around European Digital Identity Wallets. It also identifies missing work items and overlaps in standards and is supposed to work as a roadmap for future standardization projects in the area.

  • Technical report
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/IEC 2382-37:2023(Main)
Information technology - Vocabulary - Part 37: Biometrics (ISO/IEC 2382-37:2022)
SIST EN ISO/IEC 2382-37:2024

This document establishes a systematic description of the concepts in the field of biometrics pertaining to recognition of human beings. This document also reconciles variant terms in use in pre-existing International Standards on biometrics against the preferred terms, thereby clarifying the use of terms in this field.
This document does not cover concepts (represented by terms) from information technology, pattern recognition, biology, mathematics, etc. Biometrics uses such fields of knowledge as a basis.
In principle, mode-specific terms are outside of scope of this document.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17661:2021(Main)
Personal identification – European enrolment guide for biometric ID documents (EEG)
SIST-TS CEN/TS 17661:2022

This document consolidates information relating to successful and high quality biometric enrolment processes of facial and fingerprint systems, while indicating risk factors and providing appropriate mitigations. This information supports decisions regarding procurement, design, deployment and operation of these biometric systems.
This document provides guidance on:
—   capturing of facial images to be used as reference images in identity and secure documents;
—   capturing of fingerprint images to be used as reference images in identity and secure documents;
—   data quality maintenance for biometric reference data;
—   data authenticity maintenance for biometric reference data.
The document addresses the following aspects which are specific for biometric reference data capturing:
—   biometric data quality and interoperability ensurance;
—   data authenticity ensurance;
—   morphing and other presentation attack detection as well as other unauthorized changes;
—   accessibility and usability;
—   privacy and data protection;
—   optimal enrolment design.
The following aspects are out of scope:
—   IT security;
—   data capturing for verification purposes, e.g. in ABC gates;
—   capturing biometric data for enrolment in other systems different from data enrolment for integration in secure MRTD, like entry/exit systems.
This document consolidates the role of the enrolment process in a biometric system and differentiates the enrolment from the authentication, while mentioning key factors of the enrolment process that are feature independent.
Interests of the existing stakeholders are broken down and provide an insight on different views of the enrolment. In addition, organisational enrolment approaches are covered.
This document is not concerned with IT requirements or the capturing of biometric data for inspection, identification or verification purposes without the required step of creating an identity document using the captured data.

  • Technical specification
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17631:2021(Main)
Personal identification - Biometric group access control
SIST-TS CEN/TS 17631:2021

This document provides guidance on providing access:
— to areas with physical access control, e.g. entertainment facilities, train stations, shops, libraries, banks, or border control,
— for small groups of persons, e.g. families with small children or seniors, or other accompanied persons in need of support,
— by means of biometric authentication technologies, e.g. facial, fingerprint, or vein recognition,
— in the European regulatory context.
The document addresses the following aspects, which are specific for biometric and group access:
— accessibility and usability,
— user guidance including group guidance and interaction control,
— privacy including data set content,
— presentation attack detection,
— applicable biometric technologies,
— storage of reference data,
— biometric process integration,
— specific needs considering biometrics for groups,
— biometric performance and error rates, and
— group internal linkage.
The following aspects which reflect on generic access control issues are out of scope:
— IT security,
— application specific physical security,
— policy definition,
— processes not related to biometric authentication, and
— specific performance requirements of identification (1:N) and verification (1:1) applications.

  • Technical specification
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17489-1:2020(Main)
Personal identification - Secure and interoperable European Breeder Documents - Part 1: Framework overview
SIST-TS CEN/TS 17489-1:2020

This document provides an overview of a framework on breeder documents. It introduces the document structure of CEN/TS 17489 (all parts) that specifies how citizens retain the control of breeder document data and how they can use them to support identity proofing and verification. Moreover, the framework provides methodologies to assess and increase the level of trust in breeder documents.
This framework specifies methods for:
-   defining physical and logical/digital representations of a secure breeder document (hardware based, paper-based, server-based),
-   securing breeder document processes,
-   linking the document to its legitimate holder.
The following types of breeder documents are in the scope of the framework:
-   birth certificates,
-   marriage and partnership certificates,
-   death certificates.
The following breeder documents management processes including first-time application, later-in-life registration of an identity, and content update (e.g. name-changing) are in the scope of this framework:
-   registration,
-   issuance,
-   renewal,
-   inspection/verification,
-   revocation.
The specification of policies is out of scope.

  • Technical specification
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1332-3:2020(Main)
Identification card systems - User Interface - Part 3: Key pads
SIST EN 1332-3:2020

This document covers the ergonomic layout and usability of keypads. The keypad consists of numeric, command and function keys and alphanumeric characters. On the basis that keypad layout impacts performance (keying speed, and errors), this document aims to:
-   enhance usability,
-   ensure ease of use through consistency,
-   increase customer confidence,
-   reduce customer error,
-   improve operating time,
-   ensure ergonomic data entry.
This document specifies the arrangement, the number and location of numeric, function and command keys, including placement of alphabetic characters on numeric keys. Design requirements and recommendations are also provided.
This document applies to all identification card systems with a numeric keypad for use by the public for stationary or non-stationary devices. This document also covers keypads on touch sensitive devices.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17261:2018(Main)
Biometric authentication for critical infrastructure access control - Requirements and Evaluation
SIST-TS CEN/TS 17261:2019

This document addresses biometric recognition systems that are used as part of an automated access control system to provide a second and independent authentication factor of the individual using the AACS to access secured areas of critical infrastructure.
This document:
-   specifies requirements for biometric recognition systems to be used as part of an AACS for critical infrastructure,
-   describes a methodology for the evaluation of biometric authentication for AACSs against the specified requirements.
The requirements and test methods address biometric authentication for AACS that: (i) operate in an internal environment constituting part of a larger site, access to which is restricted and controlled by a separate access control system; and (ii) use biometrics as a second authentication factor to a token or proximity card.
This document does not consider access by the general public, e.g. passengers in an airport, or visitors to a hospital.
Products that meet the requirements of this document will comprise (i) a biometric sensor(s) external to the secured area, which reads the biometric characteristics of the user at the point of access; and (ii) a biometric server system performing biometric enrolment, signal processing, storage of biometric references and biometric comparison within a secured area.
This document does not address AACS or AACS portals (turnstiles) but is only concerned with the biometric components which integrate with the AACS. Other standards address requirements and testing of the non-biometric parts of the AACS.

  • Technical specification
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 419212-5:2018(Main)
Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services - Part 5: Trusted eService
SIST EN 419212-5:2018

This part of this series contains Identification, Authentication and Digital Signature (IAS) services in addition to the QSCD mechanisms already described in Part 1 to enable interoperability and usage for IAS services on a national or European level.
It also specifies additional mechanisms like key decipherment, Client Server authentication, identity management and privacy related services.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 419212-4:2018(Main)
Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services - Part 4: Privacy specific Protocols
SIST EN 419212-4:2018

This part specifies mechanisms for SEs to be used as privacy-enabled devices in the context of IAS, and fulfil the requirements of Article 5 of the so-called eIDAS Regulation about data processing and protection.
It covers:
- Age verification
- Document validation
- Restricted identification
- eServices with trusted third party based on ERA protocol

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day