EN 12942:2023
(Main)Respiratory protective devices - Powered filtering devices incorporating full face masks, half masks or quarter masks - Requirements, testing, marking
Respiratory protective devices - Powered filtering devices incorporating full face masks, half masks or quarter masks - Requirements, testing, marking
This document specifies minimum requirements for powered Respiratory Protective Devices (RPD) incorporating a tight-fitting respiratory interface. It does not cover devices designed for use in circumstances where there is or might be an oxygen deficiency.
Escape RPD and filters for use against CO are not covered by this document.
Laboratory tests and practical performance tests are included for the assessment of compliance with the requirements.
Atemschutzgeräte - Gebläsefiltergeräte mit Vollmaske, Halbmaske oder Viertelmaske - Anforderungen, Prüfung, Kennzeichnung
Dieses Dokument legt Mindestanforderungen an Atemschutzgeräte (ASG) mit Gebläse und einem Atem¬anschluss mit Dichtsitz fest. Es ist nicht anwendbar für Geräte, die für die Verwendung bei möglichem Sauerstoff-Mangel vorgesehen sind.
Fluchtgeräte (ASG zu Fluchtzwecken) und Filter zur Verwendung gegen CO werden von diesem Dokument nicht abgedeckt.
Laborprüfungen und praktische Leistungsprüfungen sind enthalten, um die Übereinstimmung mit den Anforderungen feststellen zu können.
Appareils de protection respiratoire - Appareils filtrants à ventilation assistée avec masques complets, demi-masques ou quarts de masques - Exigences, essais, marquage
Le présent document spécifie des exigences minimales applicables aux appareils de protection respiratoire (APR) intégrant une interface respiratoire à ajustement serré. Il ne traite pas des appareils conçus pour être utilisés dans des circonstances présentant ou susceptibles de présenter un défaut (manque) d’oxygène.
Les APR d’évacuation et les filtres spécifiques contre le monoxyde de carbone ne sont pas couverts par le présent document.
Il comporte des essais de laboratoire et des essais pratiques de performance pour évaluer la conformité aux exigences.
Oprema za varovanje dihal - Zaščitna obrazna, polobrazna ali četrtinska maska s tlačno filtracijo zraka - Zahteve, preskušanje, označevanje
Dokument določa minimalne zahteve za opremo za varovanje dihal (RPD) s tesno prilegajočim se vmesnikom za dihanje. Ne zajema naprav, ki so zasnovane za uporabo v okoliščinah, kjer obstaja ali se lahko pojavi pomanjkanje kisika.
Ta dokument ne zajema opreme za varovanje dihal za izhod v sili in filtrov za zaščito pred ogljikovimi oksidi.
Vključeni so tudi laboratorijski in praktični preskusi učinkovitosti za ocenjevanje skladnosti z zahtevami.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 12942:2024
01-marec-2024
Nadomešča:
SIST EN 12942:1999
SIST EN 12942:1999/A1:2003
SIST EN 12942:1999/A2:2009
Oprema za varovanje dihal - Zaščitna obrazna, polobrazna ali četrtinska maska s
tlačno filtracijo zraka - Zahteve, preskušanje, označevanje
Respiratory protective devices - Powered filtering devices incorporating full face masks,
half masks or quarter masks - Requirements, testing, marking
Atemschutzgeräte - Gebläsefiltergeräte mit Vollmaske, Halbmaske oder Viertelmaske -
Anforderungen, Prüfung, Kennzeichnung
Appareils de protection respiratoire - Appareils filtrants à ventilation assistée avec
masques complets, demi-masques ou quarts de masques - Exigences, essais,
marquage
Ta slovenski standard je istoveten z: EN 12942:2023
ICS:
13.340.30 Varovalne dihalne naprave Respiratory protective
devices
SIST EN 12942:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 12942:2024
---------------------- Page: 2 ----------------------
SIST EN 12942:2024
EN 12942
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2023
EUROPÄISCHE NORM
ICS 13.340.30 Supersedes EN 12942:1998
English Version
Respiratory protective devices - Powered filtering devices
incorporating full face masks, half masks or quarter masks
- Requirements, testing, marking
Appareils de protection respiratoire - Appareils Atemschutzgeräte - Gebläsefiltergeräte mit Vollmaske,
filtrants à ventilation assistée avec masques complets, Halbmaske oder Viertelmaske - Anforderungen,
demi-masques ou quarts de masques - Exigences, Prüfung, Kennzeichnung
essais, marquage
This European Standard was approved by CEN on 9 August 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12942:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 12942:2024
EN 12942:2023 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions, description and symbols . 6
3.1 Terms and definitions . 6
3.2 Description . 7
3.3 Symbols . 7
4 Classification . 8
5 Requirements . 9
5.1 General . 9
5.2 Values and tolerances .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.