EN 13245-1:2004

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kunststoffe - Profile aus weichmacherfreiem Polyvinylchlorid (PVC-U) für die Anwendung im Bauwesen - Teil 1: Bezeichnung von hellfarbigen ProfilenPlastiques - Profilés en poly(chlorure de vinyle) non plastifié (PVC-U) pour applications dans le bâtiment - Partie 1 : Désignation des profilés de coloris clairPlastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of light coloured profiles83.140.99Drugi izdelki iz gume in polimernih materialovOther rubber and plastics productsICS:Ta slovenski standard je istoveten z:EN 13245-1:2004SIST EN 13245-1:2005en01-marec-2005SIST EN 13245-1:2005SLOVENSKI
STANDARD



SIST EN 13245-1:2005



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13245-1September 2004ICS 83.140.99 English versionPlastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles forbuilding applications - Part 1: Designation of light colouredprofilesPlastiques - Profilés en poly(chlorure de vinyle) non plastifié(PVC-U) pour applications dans le bâtiment - Partie 1 :Désignation des profilés de coloris clairKunststoffe - Profile aus weichmacherfreiemPolyvinylchlorid (PVC-U) für die Anwendung im Bauwesen -Teil 1: Bezeichnung von hellfarbigen ProfilenThis European Standard was approved by CEN on 24 June 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13245-1:2004: ESIST EN 13245-1:2005



EN 13245-1:2004 (E) 2 Contents Page 1 Scope.4 2 Normative references.4 3 Terms and definitions.5 4 Designation of profiles for building applications.5 5 Codification system for blocks 3 to 5.6 5.1 Vicat softening temperature (block 3).6 5.2 Modulus of elasticity in flexure (block 3).6 5.3 Nominal linear mass of the profile (block 4).6 5.3.1 Test method for the determination of the linear mass.6 5.3.2 Codification.7 5.4 Heat reversion at 100 °C (block 4).7 5.5 Impact resistance (block 4).7 5.6 Properties after ageing (block 5).8 5.6.1 General.8 5.6.2 Test methods for ageing.8 5.6.3 Test methods for the assessing of ageing.
...