This document specifies requirements for the execution of aluminium structural components and structures made from:
a)   rolled sheet, strip and plate;
b)   extrusions;
c)   cold drawn rod, bar and tube;
d)   forgings;
e)   castings.
NOTE 1   The execution of structural components is referred to as manufacturing, in accordance with EN 1090-1.
This document specifies requirements independent of the type and shape of the aluminium structure, and this document is applicable to structures under predominantly static loads as well as structures subject to fatigue. It specifies requirements related to the execution classes that are linked with consequence classes.
NOTE 2   Consequence classes are defined in EN 1990.
NOTE 3   Recommendations for selection of execution class in relation to consequence class are given in EN 1999-1-1.
This document covers components made of constituent products with thickness not less than 0,6 mm for welded components not less than 1,5 mm.
For components made from cold formed profiled sheeting that are within the scope of EN 1090-5, the requirements of EN 1090-5 take precedence over corresponding requirements in this document.
This document applies to structures designed according to the relevant parts of EN 1999. If this document is used for structures designed according to other design rules or used for other alloys and tempers not covered by EN 1999, a judgement of the reliability elements in these design rules is intended to be made.
This document specifies requirements for surface preparation prior to application of a protective treatment, and gives guidelines for application for such treatment in an informative annex.
This document gives options for specifying requirements to match project specific requirements.
This document is also applicable to temporary aluminium structures.

  • Standard
    127 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    124 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements for the execution, i.e. the manufacture and the installation, of cold-formed structural steel members and sheeting and cold-formed structures for roof, ceiling, floor, wall and cladding applications.
This European Standard applies to structures designed according to the EN 1993 series.
This European Standard applies to structural members and sheeting to be designed according to EN 1993 1 3.
This European Standard may be used for structures designed according to other design rules provided that conditions for execution comply with them and any necessary additional requirements are specified.
This European Standard also specifies requirements for the execution i.e. the manufacture and the installation of structures made from cold formed profiled sheeting for roof, ceiling, floor and wall applications under predominately static loading or seismic loading conditions and their documentation.
This European Standard covers sheeting of structural classes I and II according to EN 1993 1 3 used in structures.
This European Standard covers structural members of all structural classes according to EN 1993 1 3.
Structural sheeting are understood here to be:
-   profiled sheet, such as trapezoidal, sinusoidal or liner trays (Figure 1), or
Structural members are understood here to be:
-   members (linear profiled cross sections) that are produced by cold forming (Figure 2).
This European Standard also covers:
-   not welded built-up sections (Figure 2b and 2c);
-   cold-formed hollow sections including the welding of the longitudinal seam, not covered by EN 10219 1;
-   perforated, punctured and micro profiled sheeting and members;
NOTE 1   Welded built-up sections, are not covered, the execution provisions are given in EN 1090–2.
This European Standard also covers spacer constructions between the outer and inner or upper and lower skins for roofs, walls and ceilings made from cold-formed profiled sheeting and the connections and attachments of the afore mentioned elements as long as all are involved in load transfer.
This European Standard covers steel profiled sheeting for composite floors, e.g. during installation and in stage of pouring concrete.
Composite structural members where the interaction between dissimilar materials are an integral part of the structural behaviour such as sandwich panels and composite floors are not covered by this standard.
This European Standard does not cover the necessary analyses and detailing and execution rules for thermal insulation, moisture protection, noise control and fire protection.
This European Standard does not cover regulations of roof cladding and wall cladding, produced by traditional plumber methods or tinsmith methods.
Annex B of this standard concerns provisions which are not yet included in EN 1993 1 3. The guidelines in this annex may be wholly or partially superseded by future guidelines added to EN 1993.
This European Standard does not cover detailed requirements for water tightness or air permeability resistance and thermal aspects of sheeting.
NOTE 2   The structures covered in this standard can be for example
-   single- or multi-skin roofs, whereby the load-bearing structure (lower skin) or the actual roof covering (upper skin) or both consist of cold-formed structural members and sheeting;
-   single- or multi-skin walls whereby the load-bearing structure (inner skin), the actual cladding (outer skin) or both consist of cold-formed structural members and sheeting, or
-   trusses from cold formed members.
NOTE 3   Structures can consist of an assembly of structural members and sheeting made of steel according to EN 1090–4 and of aluminium according to EN 1090-5.

  • Standard
    91 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    96 pages
    German language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    78 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    91 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements for execution of structural steelwork as structures or as manufactured components, produced from:
-   hot rolled, structural steel products up to and including grade S700;
-   cold formed components and sheeting up to and including grade S700 (unless coming within the scope of prEN 1090-4);
-   hot finished or cold formed austenitic, austenitic-ferritic and ferritic stainless steel products;
-   hot finished or cold formed structural hollow sections, including standard range and custom-made rolled products and hollow sections manufactured by welding.
For components produced from cold formed components, and cold formed structural hollow sections that are within the scope of prEN 1090-4, the requirements of prEN 1090-4 take precedence over corresponding requirements in this European Standard.
This European Standard can also be used for structural steel grades up to and including S960, provided that conditions for execution are verified against reliability criteria and any necessary additional requirements are specified.
This European Standard specifies requirements, which are mostly independent of the type and shape of the steel structure (e.g. buildings, bridges, plated or latticed components) including structures subjected to fatigue or seismic actions. Certain requirements are differentiated in terms of execution classes.
This European Standard applies to structures designed according to the relevant part of the EN 1993 series. Sheet piling, displacement piles and micropiles designed to EN 1993-5 are intended to be executed in accordance with respectively EN 12063, EN 12699 and EN 14199. This European Standard only applies to the execution of waling, bracing, and connections.
This European Standard applies to steel components in composite steel and concrete structures designed according to the relevant part of the EN 1994 series.
This European Standard can be used for structures designed according to other design rules provided that conditions for execution comply with them and any necessary additional requirements are specified.
This European Standard includes the requirements for the welding of reinforcing steels to structural steels. This European Standard does not include requirements for the use of reinforcing steels for reinforced concrete applications.

  • Standard
    204 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    210 pages
    German language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    193 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    198 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements for the execution i.e. the manufacture and the installation of cold-formed structural aluminium components made from profiled sheeting for roof, ceiling, floor and wall applications under predominately static loading conditions or seismic loading conditions and their documentation. It does cover products of structural class I and II according to EN 1999-1-4 used in structures.
Structural elements are understood here to mean profiled sheeting, such as trapezoidal, sinusoidal, liner trays or cassette profiles (Figure 1), that are produced by cold forming. Perforated and micro profiled sheeting are also covered by this part.
Welded sections are excluded from this part and are covered by EN 1090-3 except seal welding in low-stress areas.
This standard also covers spacer constructions between the outer and inner or upper and lower skins as well as supporting members for roofs, walls and ceilings made from cold-formed profiled sheeting and the connections and attachments of the afore mentioned elements as long as they are involved in load transfer, it also covers connections and attachments of these elements.
A combination of steel and aluminium structural elements are permitted, e.g. liner trays made of steel, stiffened by profiles made of aluminium. In this case, EN 1090-4 and this document apply.
Composite structural elements where the interaction between dissimilar materials are an integral part of the structural behaviour such as sandwich panels and composite floors are not covered by this standard.
NOTE   The structures covered in this standard can be for example
-   single- or multi-skin roofs, whereby the load-bearing structure (lower skin) as well as the actual roof covering (upper skin) or both consist of structural elements;
-   single- or multi-skin walls whereby the load-bearing structure (inner skin) as well as the actual cladding (outer skin) or both consist of structural elements; or
-   suspended ceilings for interior fitting.

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The scope of EN 1090-1:2009+A1:2011 states that the standard covers structural components and kits which are referred to as structural construction products in this document. This Technical Report gives information that clarifies when a structural construction product is covered by the scope of EN 1090-1:2009+A1:2011 and lists examples of products covered and not covered.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements for conformity assessment of performance characteristics for structural steel and aluminium components as well as for kits placed on the market as construction products. The conformity assessment covers the manufacturing characteristics, and where appropriate the structural design characteristics.
This European Standard covers also the conformity assessment of steel components used in composite steel and concrete structures.
The components can be used directly or in construction works or as structural components in the form of kits.
This European Standard applies to series and non-series structural components including kits.
The components can be made of hot rolled or cold formed constituent products or constituent products produced with other technologies. They may be produced of sections/profiles with various shapes, flat products (plates, sheet, strip), bars, castings, forgings made of steel and aluminium materials, unprotected or protected against corrosion by coating or other surface treatment, e.g. anodising of aluminium.
This European Standard covers structural cold formed members and sheeting as defined in EN 1993-1-3 and EN 1999-1-4.
This European Standard does not cover conformity assessment of components for suspended ceilings, rails or sleepers for use in railway systems.
NOTE   For certain steel and aluminium components, particular specifications for performance and other requirements have been developed. The particular specifications may be issued as an EN or as Clauses within an EN. An example is given in EN 13084-7 for single wall steel chimneys and steel liners. Such particular specifications will take precedence in case of non-compliance with the requirements of this European Standard.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    41 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day

This European standard provides product category rules (c-PCR), that are complementary to EN 15804, for Type III environmental declarations for steel components and aluminium components fabricated from steel or aluminium constituent products to be used for structural purposes in buildings and civil engineering works where their characteristic affects the mechanical resistance and stability of these construction works or parts thereof, where there does not exist a more specific specification for the product. This standard also provides guidance for other metal construction products where a specific PCR as EN standard does not exist.

  • Draft
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements for execution of structural steelwork as structures or as manufactured components, produced from:
-   hot rolled, structural steel products up to and including grade S700;
-   cold formed components and sheeting up to and including grade S700 (unless coming within the scope of prEN 1090-4);
-   hot finished or cold formed austenitic, austenitic-ferritic and ferritic stainless steel products;
-   hot finished or cold formed structural hollow sections, including standard range and custom-made rolled products and hollow sections manufactured by welding.
For components produced from cold formed components, and cold formed structural hollow sections that are within the scope of prEN 1090-4, the requirements of prEN 1090-4 take precedence over corresponding requirements in this European Standard.
This European Standard can also be used for structural steel grades up to and including S960, provided that conditions for execution are verified against reliability criteria and any necessary additional requirements are specified.
This European Standard specifies requirements, which are mostly independent of the type and shape of the steel structure (e.g. buildings, bridges, plated or latticed components) including structures subjected to fatigue or seismic actions. Certain requirements are differentiated in terms of execution classes.
This European Standard applies to structures designed according to the relevant part of the EN 1993 series. Sheet piling, displacement piles and micropiles designed to EN 1993-5 are intended to be executed in accordance with respectively EN 12063, EN 12699 and EN 14199. This European Standard only applies to the execution of waling, bracing, and connections.
This European Standard applies to steel components in composite steel and concrete structures designed according to the relevant part of the EN 1994 series.
This European Standard can be used for structures designed according to other design rules provided that conditions for execution comply with them and any necessary additional requirements are specified.
This European Standard includes the requirements for the welding of reinforcing steels to structural steels. This European Standard does not include requirements for the use of reinforcing steels for reinforced concrete applications.

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the product characteristics and performance criteria for steel components and aluminium components manufactured from steel or aluminium constituent products to be used for structural purposes in buildings and civil engineering works where their characteristic affects the mechanical resistance and stability of these construction works or parts thereof. This document only applies for components manufactured according to EN 1090-2:2018, FprEN 1090-3:2018, EN 1090-4:2018 and EN 1090-5:2017.
This document also gives methods for assessing the performance and specifies requirements for the assessment and verification of constancy of performance for these components.
This document covers series and non-series produced structural components including kits as well as steel parts of composite components.
This document does not cover (components for)
-   Aluminium structural composite components,
-   Amusement rides and devices which are machines or not permanently installed,
-   Anchor channels for use in concrete,
-   Balustrades unless fulfilling the function of a barrier,
-   Blind rivets,
-   Cabinets for cables and power supply installations,
-   Cables, ropes and wires,
-   Castings,
-   Circulation fixtures except sign gantry and cantilevers,
-   Components for suspended ceilings,
-   Fasteners glued to timber structures,
-   Fasteners for use in timber,
-   Fasteners and anchors for use in concrete and masonry,
-   Fastening plates and other cast into concrete fastenings,
-   Flagpoles,
-   Forgings,
-   Foundation bolts, column shoes and pile joints cast into concrete,
-   Joining devices for rail track isolation systems,
-   Non-structural fences and railings,
-   Ornamentations,
-   Piles if non-fabricated,
-   Pipelines and pipes,
-   Playground equipment,
-   Powder actuated fasteners,
-   Prefabricated steel and stainless steel wire rope systems with end connectors,
-   Prefabricated tension rod systems with end connectors,
-   Racking and shelving systems, if not integral part of the load bearing structure of the construction works,
-   Rails or sleepers for railway systems,
-   Raised floors,
-   Rebar connections,
-   Reinforcing steel for concrete or masonry,
-   Roof safety products incl. roof ladders and walkways,
-   Scaffoldings,
-   Sculptures (Metal Art),
-   Self-drilling and self-tapping screws,
-   Steel and aluminium components and elements produced on site,
-   Steel and aluminium stairs, walkways and fences forming integral part of a machine, silo, tank, etc.,
-   Steel spring elements,
-   Structural components for offshore structures,
-   Structural double skin metal faced sandwich panels,
-   Temporary structures (e.g. tents, fairground and amusement park machinery and structures)
-   Traditional craft type and non-structural components (e.g. weather cocks, letter boxes, bicycle racks, fences),
-   Tuned mass damper systems,
-   Wind turbine towers.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

To amend the technical content of EN 1090-2 on issues agreed within the TC

  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements for the execution of aluminium structural components and structures made from:
a)   rolled sheet, strip and plate;
b)   extrusions;
c)   cold drawn rod, bar and tube;
d)   forgings;
e)   castings.
NOTE 1   The execution of structural components is referred to as manufacturing, in accordance with EN 1090-1.
This European Standard specifies requirements independent of the type and shape of the aluminium structure, and this European Standard is applicable to structures under predominantly static loads as well as structures subject to fatigue. It specifies requirements related to the execution classes that are linked with consequence classes.
NOTE 2   Consequence classes are defined in EN 1990.
NOTE 3   Recommendations for selection of execution class in relation to consequence class are given in EN 1999-1-1.
This European Standard covers components made of constituent products with thickness not less than 0,6 mm for welded components not less than 1,5 mm.
This European Standard applies to structures designed according to the relevant parts of EN 1999. If this European Standard is used for structures designed according to other design rules or used for other alloys and tempers not covered by EN 1999, a judgement of the reliability elements in these design rules should be made.
This European Standard specifies requirements for surface preparation prior to application of a protective treatment, and gives guidelines for application for such treatment in an informative annex.
This European Standard gives options for specifying requirements to match project specific requirements.
This European Standard is also applicable to temporary aluminium structures.

  • Standard
    113 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements for execution of structural steelwork as structures or as manufactured components, produced from:
-   hot rolled, structural steel products up to and including grade S690;
-   cold formed components and sheeting up to and including grades S700;
-   hot finished and cold formed austenitic, austenitic-ferritic and ferritic stainless steel products;
-   hot finished and cold formed structural hollow sections, including standard range and custom-made rolled products and hollow sections manufactured by welding.
This European Standard may also be used for structural steel grades up to and including S960, provided that conditions for execution are verified against reliability criteria and any necessary additional requirements are specified.
This European Standard specifies requirements independent of the type and shape of the steel structure (e.g. buildings, bridges, plated or latticed components) including structures subjected to fatigue or seismic actions. The requirements are expressed in terms of execution classes
This European Standard applies to structures designed according to the relevant part of EN 1993.
This European Standard applies to structural components and sheeting as defined in EN 1993-1-3.
This European Standard applies to steel components in composite steel and concrete structures designed according to the relevant part of EN 1994.
This European Standard may be used for structures designed according to other design rules provided that conditions for execution comply with them and any necessary additional requirements are specified.
This European Standard does not cover requirements for watertightness or air permeability resistance of sheeting.

  • Standard
    209 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    208 pages
    German language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    201 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day

TC - Modifications in ZA.1 in the English, French and German versions.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements for conformity assessment of performance characteristics for structural steel and aluminium components as well as for kits placed on the market as construction products. The conformity assessment covers the manufacturing characteristics, and where appropriate the structural design characteristics.
This European Standard covers also the conformity assessment of steel components used in composite steel and concrete structures.
The components can be used directly or in construction works or as structural components in the form of kits.
This European Standard applies to series and non-series structural components including kits.
The components can be made of hot rolled or cold formed constituent products or constituent products produced with other technologies. They may be produced of sections/profiles with various shapes, flat products (plates, sheet, strip), bars, castings, forgings made of steel and aluminium materials, unprotected or protected against corrosion by coating or other surface treatment, e.g. anodising of aluminium.
This European Standard covers structural cold formed members and sheeting as defined in EN 1993-1-3 and EN 1999-1-4.
This European Standard does not cover conformity assessment of components for suspended ceilings, rails or sleepers for use in railway systems.
NOTE   For certain steel and aluminium components, particular specifications for performance and other requirements have been developed. The particular specifications may be issued as an EN or as Clauses within an EN. An example is given in EN 13084-7 for single wall steel chimneys and steel liners. Such particular specifications will take precedence in case of non-compliance with the requirements of this European Standard.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies requirements for execution of structural steelwork as structures or as manufactured components, produced from:
a)   hot rolled, structural steel products up to and including grade S690;
b)   cold formed components and sheeting up to and including grades S700 for stainless steels and including S690 for carbon steels;
c)   hot finished and cold formed austenitic, austenitic-ferritic and ferritic stainless steel products;
d)   hot finished and cold formed structural hollow sections, including standard range and custom-made rolled products and hollow sections manufactured by welding.
This European Standard may also be used for structural steel grades up to and including S960, provided that conditions for execution are verified against reliability criteria and any necessary additional requirements are specified.
This European Standard specifies requirements independent of the type and shape of the steel structure (e.g. buildings, bridges, plated or latticed components) including structures subjected to fatigue or seismic actions.
This European Standard applies to structures designed according to the relevant part of EN 1993.
This European Standard applies to structural components and sheeting as defined in EN 1993-1-3.
This European Standard applies to steel components in composite steel and concrete structures designed according to the relevant part of EN 1994.
This European Standard may be used for structures designed according to other design rules provided that conditions for execution comply with them and any necessary additional requirements are specified.
This European Standard specifies requirements related to execution classes.
This European Standard specifies requirements related to geometrical tolerances.
NOTE   Geometrical tolerances required by EN 1993 design rules are covered by the essential tolerance type.

  • Standard
    203 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This Part 6 of European Prestandard ENV 1090 specifies requirements for execution of structural steelwork produced from stainless steel products. This Part of ENV 1090 gives detailed requirements for structures that are not significantly susceptible to fatigue. The definition of structures which are not significantly susceptible to fatigue is given in ENV 1993-1-1.

  • Standard + National Annex and/or Foreword
    40 pages
    Foreword and/or annex in Slovenian language, body of the standard in English language
    sale 10% off
    e-Library read for
    1 day

This clause of ENV 1090-1 is applicable except as follows: Addition: (106) This Part of EN 1090 specifies particular requirements for the execution of structural steel bridge super-structures, comprising general rules independant of the type of bridge. (107) This Part of European Prestandard refers to ENV 1993-2, ENV 1993-1-5 and the steel components of composite bridges designed according to ENV 1994-2. (108) ENV 1090-3 and ENV 1090-4 are applicable under the conditions given in the project specification.

  • Standard + National Annex and/or Foreword
    17 pages
    Foreword and/or annex in Slovenian language, body of the standard in English language
    sale 10% off
    e-Library read for
    1 day

Preparation ENV approved by BTS1 C18/1994.
Derogation from the PNE rules for prENV 1090-1 to -5 (for the ENV phase only) according to BT C 55/1996 (this resolution replaces resolution BT 8/1996)
Res. 3/97 : FV launched (MB970718)

  • Standard + National Annex and/or Foreword
    35 pages
    Foreword and/or annex in Slovenian language, body of the standard in English language
    sale 10% off
    e-Library read for
    1 day

This part of ENV 1090 gives supplementary provisions extending the application of ENV 1090-1 to cover requirements for execution of steel structures or components for steel structures that are: latticed and assembled into either uni-planar or multi-planar configurations; and composed partly or wholly of circular, square or rectangular hollow sections.

  • Standard + National Annex and/or Foreword
    25 pages
    Foreword and/or annex in Slovenian language, body of the standard in English language
    sale 10% off
    e-Library read for
    1 day

This part of European prestandard specifies particular requirements for the execution of structural steelwork produced in High Strength Steels grades S420 and S460.

  • Standard + National Annex and/or Foreword
    14 pages
    Foreword and/or annex in Slovenian language, body of the standard in English language
    sale 10% off
    e-Library read for
    1 day

This European Standard gives requirements for execution of steel structures in order to ensure an adequate level of mechanical resistance and stability, serviceability and durability. This European Standard specifies requirements for execution which are intended to be consistent with requirements for Design of steel structures as given in ENV 1993-1-1, i.e. structures not susceptible tofatigue. The standard is also applicable to steel components in composite structures.

  • Standard + National Annex and/or Foreword
    128 pages
    Foreword and/or annex in Slovenian language, body of the standard in English language
    sale 10% off
    e-Library read for
    1 day