Environmental management - Vocabulary (ISO 14050:2020)

This document defines terms used in documents in the fields of environmental management systems
and tools in support of sustainable development. These include management systems, auditing and
other types of assessment, communications, footprinting studies, greenhouse gas mitigation and
adaptation to climate change.

Umweltmanagement - Begriffe (ISO 14050:2020)

Dieses Dokument definiert Begriffe, die in Dokumenten in den Bereichen Umweltmanagementsysteme und Instrumente zur Unterstützung einer nachhaltigen Entwicklung verwendet werden. Dazu gehören Managementsysteme, Auditierung und andere Arten der Bewertung, Kommunikation, Footprinting Studien, Verringerung von Treibhausgasemissionen und Anpassung an den Klimawandel.

Management environnemental - Vocabulaire (ISO 14050:2020)

Le présent document définit les termes dans les documents relatifs aux domaines des systèmes de management environnemental et aux outils venant à l'appui du développement durable, ce qui inclut les systèmes de management, les audits et les autres types d'évaluation, les communications, les études d'empreinte, l'atténuation des gaz à effet de serre et l'adaptation au changement climatique.

Ravnanje z okoljem - Slovar (ISO 14050:2020)

General Information

Status
Published
Public Enquiry End Date
17-Dec-2019
Publication Date
04-Oct-2020
Technical Committee
Current Stage
6100 - Translation of adopted SIST standards (Adopted Project)
Start Date
23-Jun-2022
Due Date
22-Jun-2023
Completion Date
29-May-2023

Relations

Buy Standard

Standard
EN ISO 14050:2020
English language
81 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard – translation
EN ISO 14050:2020
Slovenian and English language
131 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 14050:2019
English language
89 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14050:2020
01-november-2020
Nadomešča:
SIST EN ISO 14050:2010
Ravnanje z okoljem - Slovar (ISO 14050:2020)
Environmental management - Vocabulary (ISO 14050:2020)
Umweltmanagement - Begriffe (ISO 14050:2020)
Management environnemental - Vocabulaire (ISO 14050:2020)
Ta slovenski standard je istoveten z: EN ISO 14050:2020
ICS:
01.040.13 Okolje. Varovanje zdravja. Environment. Health
Varnost (Slovarji) protection. Safety
(Vocabularies)
13.020.10 Ravnanje z okoljem Environmental management
SIST EN ISO 14050:2020 en,fr,ru
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 14050:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 14050:2020


EN ISO 14050
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2020
EUROPÄISCHE NORM
ICS 01.040.13; 13.020.10 Supersedes EN ISO 14050:2010
English Version

Environmental management - Vocabulary (ISO
14050:2020)
Management environnemental - Vocabulaire (ISO Umweltmanagement - Begriffe (ISO 14050:2020)
14050:2020)
This European Standard was approved by CEN on 17 July 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14050:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 14050:2020
EN ISO 14050:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 14050:2020
EN ISO 14050:2020 (E)
European foreword
This document (EN ISO 14050:2020) has been prepared by Technical Committee ISO/TC 207
"Environmental management" in collaboration with CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2021, and conflicting national standards
shall be withdrawn at the latest by February 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14050:2010.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 14050:2020 has been approved by CEN as EN ISO 14050:2020 without any modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 14050:2020

---------------------- Page: 6 ----------------------
SIST EN ISO 14050:2020
INTERNATIONAL ISO
STANDARD 14050
Fourth edition
2020-07
Environmental management —
Vocabulary
Management environnemental — Vocabulaire
Reference number
ISO 14050:2020(E)
©
ISO 2020

---------------------- Page: 7 ----------------------
SIST EN ISO 14050:2020
ISO 14050:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 14050:2020
ISO 14050:2020(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 General terms relating to management systems . 1
3.2 General terms relating to environmental management . 3
3.3 Terms relating to environmental management systems . 6
3.4 Terms relating to verification, validation and audit. 6
3.5 Terms relating to product systems .10
3.6 Terms relating to life cycle assessment .12
3.7 Terms relating to environmental labelling, declarations and communication .17
3.8 Terms relating to climate change and climate action .19
3.9 Terms relating to greenhouse gases .21
3.10 Terms relating to water footprint .25
3.11 Terms relating to carbon footprint .27
3.12 Terms relating to economy and finance .27
Annex A (informative) Concept relations and concept systems .32
Bibliography .55
Alphabetical index .57
© ISO 2020 – All rights reserved iii

---------------------- Page: 9 ----------------------
SIST EN ISO 14050:2020
ISO 14050:2020(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO’s adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 207, Environmental management, in
collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/
SS S26, Environmental management, in accordance with the Agreement on technical cooperation
between ISO and CEN (Vienna Agreement).
This fourth edition cancels and replaces the third edition (ISO 14050:2009), which has been technically
revised. The fourth edition is structured differently from the third edition. It presents a more generic
vocabulary of environmental management terminology.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2020 – All rights reserved

---------------------- Page: 10 ----------------------
SIST EN ISO 14050:2020
ISO 14050:2020(E)

Introduction
Communication is important in the implementation and operation of environmental management
systems. This communication will be most effective if there is a common understanding of the terms used.
To simplify the harmonization of terms and definitions in the field of environmental management, each
terminological entry in this document contains a generic term and its definition. Notes to entry and
examples have been included only in a few cases to provide additional information or clarification.
The terminology is arranged in subclauses, each representing a specific sub-domain. The sequence of
the term entries corresponds to the concept diagrams in Annex A.
This document has been developed in close cooperation with the committees and working groups
involved in the development and revision of the ISO 14000 family of standards. A list of published
documents in the ISO 14000 family of standards is presented in the Bibliography.
© ISO 2020 – All rights reserved v

---------------------- Page: 11 ----------------------
SIST EN ISO 14050:2020

---------------------- Page: 12 ----------------------
SIST EN ISO 14050:2020
INTERNATIONAL STANDARD ISO 14050:2020(E)
Environmental management — Vocabulary
1 Scope
This document defines terms used in documents in the fields of environmental management systems
and tools in support of sustainable development. These include management systems, auditing and
other types of assessment, communications, footprinting studies, greenhouse gas mitigation and
adaptation to climate change.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
3.1 General terms relating to management systems
3.1.1
organization
person or group of people that has its own functions with responsibilities, authorities and relationships
to achieve its objectives (3.1.6)
3.1.2
interested party
stakeholder
person or organization (3.1.1) that can affect, be affected by, or perceive itself to be affected by a
decision or activity
3.1.3
top management
person or group of people who directs and controls an organization (3.1.1) at the highest level
3.1.4
management system
set of interrelated or interacting elements of an organization (3.1.1) to establish policies (3.1.5) and
objectives (3.1.6), as well as processes (3.1.9) to achieve those objectives
3.1.5
policy
intentions and direction of an organization (3.1.1), as formally expressed by its top management (3.1.3)
3.1.6
objective
result to be achieved
3.1.7
risk
effect of uncertainty
© ISO 2020 – All rights reserved 1

---------------------- Page: 13 ----------------------
SIST EN ISO 14050:2020
ISO 14050:2020(E)

3.1.8
hazard
potential source of injury or damage to the health of people, or damage to property or the
environment (3.2.2)
3.1.9
process
set of interrelated or interacting activities that uses or transforms inputs to deliver a result
3.1.10
competence
ability to apply knowledge and skills to achieve intended results
3.1.11
documented information
information required to be controlled and maintained by an organization (3.1.1) and the medium on
which it is contained
3.1.12
performance
measurable result
3.1.13
continual improvement
recurring activity to enhance performance (3.1.12)
3.1.14
effectiveness
extent to which planned activities are realized and planned results achieved
3.1.15
requirement
need or expectation that is stated, generally implied or obligatory
3.1.16
conformity
fulfilment of a requirement (3.1.15)
3.1.17
nonconformity
non-fulfilment of a requirement (3.1.15)
3.1.18
corrective action
action to eliminate the cause(s) of a nonconformity (3.1.17) and to prevent recurrence
3.1.19
audit
systematic and independent process (3.1.9) for obtaining evidence and evaluating it objectively to
determine the extent to which the audit criteria (3.4.44) are fulfilled
3.1.20
measurement
process (3.1.9) to determine a value
3.1.21
monitoring
determining the status of a system, a process (3.1.9) or an activity
2 © ISO 2020 – All rights reserved

---------------------- Page: 14 ----------------------
SIST EN ISO 14050:2020
ISO 14050:2020(E)

3.2 General terms relating to environmental management
3.2.1
environmental management
set of coordinated activities within an organization (3.1.1) related to its environmental aspects (3.2.20)
3.2.2
environment
surroundings in which an organization (3.1.1) operates, including air, water, land (3.8.16), natural
resources (3.2.5), flora, fauna, humans and their interrelationships
3.2.3
ecosystem
dynamic complex of communities of plants, animals and microorganisms and their non-living
environment, interacting as a functional entity
3.2.4
ecosystem service
benefit people obtain from one or several ecosystems (3.2.3)
3.2.5
natural resource
part of nature that provides benefits to humans or underpins human well-being
3.2.6
environmental baseline
state of the environment (3.2.2) without the change that is considered
3.2.7
target group
interested party (3.1.2) or interested parties selected as the focus of an organization’s (3.1.1)
environmental communication (3.7.19) activity
3.2.8
third party
person or body that is recognized as being independent of the parties involved, as concerns the issues
in question
3.2.9
sustainable development
development that meets the needs of the present without compromising the ability of future generations
to meet their own needs
3.2.10
prevention of pollution
use of processes (3.1.9), practices, techniques, materials, products (3.5.12), or energy to avoid, reduce
or control (separately or in combination) the creation, emission or discharge of any type of pollutant or
waste, in order to reduce adverse environmental impacts (3.2.22)
3.2.11
area of concern
aspect of the natural environment, human health or resources of interest to society
3.2.12
environmental topic area
area of interest or concern for environmental management (3.2.1) in an organization (3.1.1) in relation to
its surroundings
3.2.13
methodology
set of means or procedures (3.3.6) used for a specific purpose
© ISO 2020 – All rights reserved 3

---------------------- Page: 15 ----------------------
SIST EN ISO 14050:2020
ISO 14050:2020(E)

3.2.14
transparency
open, comprehensive and understandable presentation of information
3.2.15
benchmark
reference point against which comparisons can be made
3.2.16
equity share
extent of the rights an organization (3.1.1) has to the risks (3.1.7) and rewards from an operation based
on its equity interest
3.2.17
local authority
public body given the authority by legislation or directives of a higher level of government to set general
policies (3.1.5), plans or requirements (3.1.15)
3.2.18
site
location with geographical boundaries and on which activities under the control of an organization
(3.1.1) can be carried out
3.2.19
facility
single installation, set of installations or production processes (3.1.9) (stationary or mobile), which can
be defined within a single geographical boundary, organizational unit or production process
3.2.20
environmental aspect
element of an organization’s (3.1.1) activities or products (3.5.12) that interacts or can interact with the
environment (3.2.2)
3.2.21
environmental impact pathway
series of consecutive, causal relationships, ultimately starting at an environmental aspect (3.2.20) and
ending at an environmental impact (3.2.22)
3.2.22
environmental impact
change to the environment (3.2.2), whether adverse or beneficial, including possible consequences,
wholly or partially resulting from an organization’s (3.1.1) environmental aspects (3.2.20)
3.2.23
environmental impact factor
quantity of environmental impact (3.2.22) per quantity of environmental aspect (3.2.20)
3.2.24
indicator
quantitative, qualitative or binary variable that can be measured, calculated or described, representing
the status of operations, management, conditions or impacts
3.2.25
key performance indicator
KPI
indicator (3.2.24) of performance (3.1.12) deemed by an organization (3.1.1) to be significant and giving
prominence and attention to certain aspects of operations, management, conditions or impacts
4 © ISO 2020 – All rights reserved

---------------------- Page: 16 ----------------------
SIST EN ISO 14050:2020
ISO 14050:2020(E)

3.2.26
combined indicator
indicator (3.2.24) that includes information on more than one aspect of operations, management,
conditions or impacts
3.2.27
environmental performance
performance (3.1.12) related to the management of environmental aspects (3.2.20)
3.2.28
environmental performance evaluation
EPE
process (3.1.9) to facilitate management decisions regarding an organization’s (3.1.1) environmental
performance (3.2.27) by selecting indicators (3.2.24), collecting and analysing data, assessing
information against environmental performance criteria, reporting and communicating, and
periodically reviewing and improving this process
3.2.29
environmental performance indicator
EPI
indicator (3.2.24) that provides information about an organization’s (3.1.1) environmental performance
(3.2.27)
3.2.30
management performance indicator
MPI
environmental performance indicator (3.2.29) that provides information about the management efforts
to influence an organization’s (3.1.1) environmental performance (3.2.27)
3.2.31
operational performance indicator
OPI
environmental performance indicator (3.2.29) that provides information about the environmental
performance (3.2.27) of an organization’s (3.1.1) operation
3.2.32
environmental condition indicator
indicator (3.2.24) that provides information about the local, regional, national or global environmental
condition (3.2.33)
3.2.33
environmental condition
state or characteristic of the environment (3.2.2) as determined at a certain point in time
3.2.34
sphere of influence
range or extent of political, contractual, economic or other relationships through which an organization
(3.1.1) has the ability to affect the decisions or activities of individuals or organizations
3.2.35
trade-off
decision-making actions that select from various requirements (3.1.15) and alternative solutions on the
basis of net benefit to interested parties (3.1.2)
© ISO 2020 – All rights reserved 5

---------------------- Page: 17 ----------------------
SIST EN ISO 14050:2020
ISO 14050:2020(E)

3.3 Terms relating to environmental management systems
3.3.1
environmental management system
EMS
part of the management system (3.1.4) used to manage environmental aspects (3.2.20), fulfil compliance
obligations (3.3.4), and address risks (3.1.7) and opportunities
3.3.2
environmental policy
policy (3.1.5) related to environmental performance (3.2.27)
3.3.3
environmental objective
objective (3.1.6) set by the organization (3.1.1) and consistent with its environmental policy (3.3.2)
3.3.4
compliance obligation
legal requirement that an organization (3.1.1) has to comply with or other requirement (3.1.15) that an
organization has to or chooses to comply with
3.3.5
maturity level
level of achievement in the implementation process measured on a scale of maturity for environmental
management system (3.3.1) elements
3.3.6
procedure
specified way to carry out an activity or a process (3.1.9)
3.4 Terms relating to verification, validation and audit
3.4.1
verification
conformity assessment
confirmation through the provision of objective evidence (3.4.32), that specified requirements (3.1.15)
have been fulfilled
3.4.2
verification statement
formal declaration of the outcome of a verification (3.4.1)
3.4.3
verification team
one or more verifiers (3.4.5) conducting a verification (3.4.1), supported if needed by technical experts
(3.4.36)
3.4.4
verification body
organization (3.1.1) that performs verifications (3.4.1)
3.4.5
verifier
competent and independent person or persons with responsibility for performing and reporting on a
verification (3.4.1) process (3.1.9)
3.4.6
verification plan
planning document detailing the implementation of verification (3.4.1)
6 © ISO 2020 – All rights reserved

---------------------- Page: 18 ----------------------
SIST EN ISO 14050:2020
ISO 14050:2020(E)

3.4.7
verification report
document detailing a verification (3.4.1) and its results
3.4.8
environmental claim verification
confirmation of the validity of an environmental claim (3.7.3) using specific predetermined criteria and
procedures (3.3.6) with an assurance of data reliability
3.4.9
technology
application of scientific knowledge, tools, techniques, crafts or systems in order to solve a problem or to
achieve an objective (3.1.6), which can result in a product (3.5.12) or process (3.1.9)
3.4.10
environmental technology
technology (3.4.9) that either results in an environmental added value (3.4.12) or measures parameters
that indicate an environmental impact (3.2.22)
3.4.11
environmental technology verification
verification (3.4.1) of the performance (3.1.12) of an environmental technology (3.4.10) by a verifier (3.4.5)
3.4.12
environmental added value
more beneficial or less adverse environmental impact (3.2.22) of a technology (3.4.9) with respect to the
relevant alternative
3.4.13
intrusive investigation
sampling and testing requiring physical interference
3.4.14
professional scepticism
attitude that includes a questioning mind and a critical assessment of evidence
3.4.15
completeness check
process (3.1.9) of verifying whether information from the phases of a life cycle assessment (3.6.2) is
sufficient for reaching conclusions in accordance with the goal and scope definition
3.4.16
consistency check
process (3.1.9) of verifying that the assumptions, methods and data are consistently applied
throughout the study and are in accordance with the goal and scope definition performed before
conclusions are reached
3.4.17
sensitivity check
process (3.1.9) to determine that the information obtained from a sensitivity analysis (3.6.25) is relevant
for reaching conclusions, changing results, have influence on results and giving recommendations
3.4.18
test body
organization (3.1.1) providing an environment for testing, test implementation and means for
performing and reporting on the testing
3.4.19
test plan
planning document detailing the principles, test methods, conditions, procedures (3.3.6) and data
quality (3.6.46) required to carry out testing and to produce test data
© ISO 2020 – All rights reserved 7

---------------------- Page: 19 ----------------------
SIST EN ISO 14050:2020
ISO 14050:2020(E)

3.4.20
test report
document describing conditions and results of testing, and usually including a description of or
reference to procedures (3.3.6)
3.4.21
validation
confirmation through the provision of objective evidence (3.4.32) that the requirements (3.1.15) for a
specific intended use or application have been fulfilled
3.4.22
validation statement
formal declaration of the outcome of a validation (3.4.21)
3.4.23
validation team
one or more validators (3.4.25) conducting a validation (3.4.21), supported if needed by technical experts
(3.4.36)
3.4.24
validation body
organization (3.1.1) that performs validations (3.4.21)
3.4.25
validator
competent and independent person or persons with responsibility for performing a validation (3.4.21)
and reporting on the results of the validation
3.4.26
complaint
expression of dissatisfaction, other than by appeal, by any person or organization (3.1.1) to another
person or organization, relating to its activities, where a response is expected
3.4.27
validation criteria
policy (3.1.5), procedure (3.3.6) or requirement (3.1.15) used as a reference against which evidence is
compared
3.4.28
level of assurance
degree of reliability the intended user requires in a validation (3.4.21) or verification (3.4.1)
3.4.29
conflict of interest
situation in which, because of other activities or relationships, impartiality in performing validation
(3.4.21) or verification (3.4.1) activities is or could be compromised
3.4.30
accreditation
third-party attestation related to a validation body (3.4.24), verification body (3.4.4) or certification body
conveying a formal demonstration of its competence (3.1.10) to carry out specific validation (3.4.21) or
verification (3.4.1) tasks
3.4.31
accreditation body
authority that performs accreditation (3.4.30)
3.4.32
objective evidence
data supporting the existence or verity of something
8 © ISO 2020 – All rights reserved

---------------------- Page: 20 ----------------------
SIST EN ISO 14050:2020
ISO 14050:2020(E)

3.4.33
audit client
organization (3.1.1) or person requesting an audit (3.1.19)
3.4.34
auditee
organization (3.1.1) being audited
3.4.35
audit team
one or more persons conducting an audit (3.1.19), supported if needed by technical experts (3.4.36)
3.4.36
technical expert
person who provides specific knowledge on a specified subject
3.4.37
auditor
person who conducts an audit (3.1.19)
3.4.38
combined audit
audit (3.1.19) carried out together at a single auditee (3.4.34) on two or more management systems (3.1.4)
3.4.39
joint audit
audit (3.1.19) carried out at a single auditee (3.4.34) by two or more auditing organizations (3.1.1)
3.4.40
internal audit
audit (3.1.19) where the audit team (3.4.35) belongs to the auditee (3.4.34)
3.4.41
audit programme
set of one or more audits (3.1.19) planned for a specific time frame and directed towards a specific purpose
3.4.42
audit scope
extent and b
...

ba

S L O V E N S K I SIST EN ISO 14050



S T A N D A R D
november 2020













Ravnanje z okoljem – Slovar (ISO 14050:2020)

Environmental management – Vocabulary (ISO 14050:2020)

Management environnemental – Vocabulaire (ISO 14050:2020)

Umweltmanagement – Begriffe (ISO 14050:2020)






















Referenčna oznaka
ICS 01.040.13; 13.020.10 SIST EN ISO 14050:2020 (sl)

Nadaljevanje na straneh II in od 1 do 130

© 2023-06. Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 14050 : 2020
NACIONALNI UVOD

Standard SIST EN ISO 14050 (sl, en), Ravnanje z okoljem – Slovar (ISO 14050:2020), 2020, ima status
slovenskega standarda in je istoveten evropskemu standardu EN ISO 14050, Environmental
management – Vocabulary (ISO 14050:2020), 2020.

Ta standard nadomešča SIST EN ISO 14050:2010.

NACIONALNI PREDGOVOR

Mednarodni standard ISO 14050:2020 je pripravil tehnični odbor Mednarodne organizacije za
standardizacijo ISO/TC 207 Ravnanje z okoljem v sodelovanju s CCMC (CEN-CENELEC Management
Center).

Slovenski standard SIST EN ISO 14050:2020 je prevod angleškega besedila evropskega standarda EN
ISO 14050:2020, ki je istoveten mednarodnemu standardu; k dokumentu je dodan evropski predgovor.
V primeru spora glede besedila slovenskega prevoda v tem standardu je odločilen izvirni evropski
standard v angleškem jeziku. To izdajo standarda je pripravil tehnični odbor izdajo SIST/TC UZO
Upravljanje z okoljem.

Odločitev za privzem tega standarda je 1. novembra 2020 sprejel tehnični odbor SIST/TC UZO
Upravljanje z okoljem.

OSNOVA ZA IZDAJO STANDARDA

– privzem standarda EN ISO 14050:2020.

PREDHODNA IZDAJA

– SIST EN ISO 14050:2010 (en), Ravnanje z okoljem – Slovar (ISO 14050:2009)

OPOMBE

– Povsod, kjer se v besedilu standarda uporablja izraz "evropski" ali "mednarodni" standard, v SIST
EN ISO 14050:2020 to pomeni "slovenski" standard.

– Nacionalni uvod in nacionalni predgovor nista sestavni del standarda.

– Ta nacionalni dokument je istoveten EN ISO 14050:2020 in je objavljen z dovoljenjem

CEN-CENELEC
Upravni center
Rue de la Science 23
B-1040 Brussel

This national document is identical with EN ISO 14050:2020 and is published with the permission
of

CEN-CENELEC
Management Centre
Rue de la Science 23
B-1040 Brussel

II

---------------------- Page: 2 ----------------------
EVROPSKI STANDARD  EN ISO 14050
EUROPEAN STANDARD

NORME EUROPÉENNE
avgust 2020
EUROPÄISCHE NORM

ICS 01.040.13; 13.020.10




Slovenska izdaja

Ravnanje z okoljem – Slovar (ISO 14050:2020)

Environmental management – Management environnemental – Umweltmanagement – Begriffe
Vocabulary (ISO 14050:2020) Vocabulaire (ISO 14050:2020) (ISO 14050:2020)



Ta evropski standard je CEN sprejel 17. julija 2020.

Člani CEN morajo izpolnjevati določila notranjih predpisov CEN/CENELEC, s katerimi je predpisano, da
mora biti ta evropski standard brez kakršnihkoli sprememb sprejet kot nacionalni standard. Seznami
najnovejših izdaj teh nacionalnih standardov in njihovi bibliografski podatki so na voljo na zahtevo pri
Upravnem centru CEN-CENELEC ali katerem koli članu CEN.

Ta evropski standard obstaja v treh uradnih izdajah (angleški, francoski in nemški). Izdaje v drugih
jezikih, ki jih člani CEN na lastno odgovornost prevedejo in izdajo ter prijavijo pri Upravnem centru CEN-
CENELEC, veljajo kot uradne izdaje.

Člani CEN so nacionalni organi za standarde Avstrije, Belgije, Bolgarije, Cipra, Češke republike,
Danske, Estonije, Finske, Francije, Grčije, Hrvaške, Irske, Islandije, Italije, Latvije, Litve, Luksemburga,
Madžarske, Malte, Nemčije, Nizozemske, Norveške, Poljske, Portugalske, Republike Severna
Makedonija, Romunije, Slovaške, Slovenije, Srbije, Španije, Švedske, Švice, Turčije in Združenega
kraljestva.

















CEN
Evropski komite za standardizacijo
European committee for standardization
Comité européen de normalisation
Europäisches komitee für normung

Upravni center CEN-CENELEC: Rue de la Science 23, B-1040 Bruselj

© 2020 CEN Vse pravice do izkoriščanja v kakršnikoli obliki in na kakršenkoli Ref. št. EN ISO 14050:2020 E
način imajo nacionalni člani CEN.

---------------------- Page: 3 ----------------------
SIST EN ISO 14050 : 2020

VSEBINA Stran CONTENTS Page
Evropski predgovor . 3 European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 14050 : 2020

Evropski predgovor European foreword
Ta dokument (EN ISO 14050:2020) je pripravil This document (EN ISO 14050:2020) has

tehnični odbor ISO/TC 207 Ravnanje z been prepared by Technical Committee
okoljem v sodelovanju s CCMC (Upravni ISO/TC 207 "Environmental management" in
center CEN-CENELEC). collaboration with CCMC.
Ta evropski standard mora dobiti status This European Standard shall be given the

nacionalnega standarda z objavo istovetnega status of a national standard, either by
besedila ali z razglasitvijo najpozneje do publication of an identical text or by
februarja 2021. Nacionalne standarde, ki so v endorsement, at the latest by February 2021,
nasprotju s tem standardom, je treba umakniti and conflicting national standards shall be
najpozneje do februarja 2021. withdrawn at the latest by February 2021.
Opozoriti je treba na možnost, da je lahko Attention is drawn to the possibility that some

nekaj elementov tega mednarodnega of the elements of this document may be the
standarda predmet patentnih pravic. CEN ne subject of patent rights. CEN shall not be held
prevzema odgovornosti za ugotavljanje responsible for identifying any or all such
katerihkoli ali vseh takih patentnih pravic. patent rights.
Ta dokument nadomešča EN ISO This document supersedes EN ISO
14050:2010. 14050:2010.
Ta dokument je bil pripravljen v okviru This document has been prepared under a
mandata, ki sta ga Evropska komisija in mandate given to CEN by the European
Evropsko združenje za prosto trgovino (EFTA) Commission and the European Free Trade
podelila CEN. Association.
Po določilih notranjih predpisov According to the CEN-CENELEC Internal
CEN/CENELEC so ta evropski standard Regulations, the national standards
dolžne privzeti nacionalne organizacije za organizations of the following countries are
standarde naslednjih držav: Avstrije, Belgije, bound to implement this European Standard:
Bolgarije, Cipra, Češke republike, Danske, Austria, Belgium, Bulgaria, Croatia, Cyprus,
Estonije, Finske, Francije, Grčije, Hrvaške, Czech Republic, Denmark, Estonia, Finland,
Irske, Islandije, Italije, Latvije, Litve, France, Germany, Greece, Hungary, Iceland,
Luksemburga, Madžarske, Malte, Nemčije, Ireland, Italy, Latvia, Lithuania, Luxembourg,
Nizozemske, Norveške, Poljske, Portugalske, Malta, Netherlands, Norway, Poland,
Republike Severna Makedonija, Romunije, Portugal, Republic of North Macedonia,
Slovaške, Slovenije, Srbije, Španije, Švedske, Romania, Serbia, Slovakia, Slovenia, Spain,
Švice, Turčije in Združenega kraljestva. Sweden, Switzerland, Turkey and the United
Kingdom.
Razglasitvena objava Endorsement notice
Besedilo ISO 14050:2020 je CEN odobril kot The text of ISO 14050:2020 has been
EN ISO 14050:2020 brez kakršnihkoli approved by CEN as EN ISO 14050:2020
sprememb. without any modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 14050 : 2020

VSEBINA Stran CONTENTS Page
Predgovor k mednarodnemu standardu . 5 Foreword . 5
Uvod . 7 Introduction . 7
1 Področje uporabe . 8 1 Scope . 8
2 Zveze s standardi . 8 2 Normative references . 8
3 Izrazi in definicije . 8 3 Terms and definitions . . 8
3.1 Splošni izrazi v zvezi s sistemi vodenja . 8 3.1 General terms relating to management
systems . 8
3.2 Splošni izrazi v zvezi z ravnanjem 3.2 General terms relating to environmental
z okoljem . 10 management .10
3.3 Izrazi v zvezi s sistemi ravnanja 3.3 Terms relating to environmental
z okoljem . 14 management systems .14
3.4 Izrazi v zvezi s preverjanjem, validacijo 3.4 Terms relating to verification, validation
in presojanjem . 15 and audit .15
3.5 Izrazi v zvezi s proizvodnimi sistemi . 20 3.5 Terms relating to product systems .20
3.6 Izrazi v zvezi z ocenjevanjem 3.6 Terms relating to life cycle assessment .24
življenjskega cikla . 24
3.7 Terms relating to environmental labelling,
3.7 Izrazi v zvezi z okoljskim označevanjem,
declarations and communication .30
deklaracijami in komuniciranjem . 30
3.8 Terms relating to climate change and
3.8 Izrazi v zvezi s podnebnimi
climate action .33
spremembami in podnebnimi ukrepi . 33
3.9 Terms relating to greenhouse gases .36
3.9 Izrazi v zvezi s toplogrednimi plini . 36
3.10 Terms relating to water footprint .42
3.10 Izrazi v zvezi z vodnim odtisom . 42
3.11 Terms relating to carbon footprint .45
3.11 Izrazi v zvezi z ogljičnim odtisom . 45
3.12 Terms relating to economy and finance .46
3.12 Izrazi v zvezi z ekonomijo in financami . 46
Annex A (informative) Concept relations and
Dodatek A (informativni): Pojmovna razmerja
concept systems .51
in sistemi . 51
Bibliography .95
Literatura. 95
Alphabetical index .99
Abecedni seznam . 99

4

---------------------- Page: 6 ----------------------
SIST EN ISO 14050 : 2020

Predgovor k mednarodnemu standardu Foreword
ISO (Mednarodna organizacija za ISO (the International Organization for

standardizacijo) je svetovna zveza nacionalnih Standardization) is a worldwide federation of
organov za standarde (članov ISO). national standards bodies (ISO member bodies).
Mednarodne standarde po navadi pripravljajo The work of preparing International Standards is
tehnični odbori ISO. Vsak član, ki želi delovati na normally carried out through ISO technical
določenem področju, za katero je bil ustanovljen committees. Each member body interested in a
tehnični odbor, ima pravico biti zastopan v tem subject for which a technical committee has been
odboru. Pri delu sodelujejo tudi mednarodne established has the right to be represented on that
vladne in nevladne organizacije, povezane z committee. International organizations,
ISO. V vseh zadevah, ki so povezane s governmental and non-governmental, in liaison
standardizacijo na področju elektrotehnike, ISO with ISO, also take part in the work. ISO
tesno sodeluje z Mednarodno elektrotehniško collaborates closely with the International
Electrotechnical Commission (IEC) on all matters
komisijo (IEC).
of electrotechnical standardization.
Postopki, uporabljeni pri pripravi tega The procedures used to develop this document

dokumenta, in predvideni postopki za njegovo and those intended for its further maintenance are
vzdrževanje so opisani v Direktivah ISO/IEC, described in the ISO/IEC Directives, Part 1. In
1. del. Posebna pozornost naj se nameni particular, the different approval criteria needed
različnim kriterijem odobritve, potrebnim za for the different types of ISO documents should
različne vrste dokumentov ISO. Ta dokument je be noted. This document was drafted in
bil zasnovan v skladu z uredniškimi pravili accordance with the editorial rules of the ISO/IEC
Direktiv ISO/IEC, 2. del (glej Directives, Part 2 (see www .iso .org/ directives).
www.iso.org/directives).
Opozoriti je treba na možnost, da je lahko nekaj Attention is drawn to the possibility that some of
elementov tega mednarodnega standarda the elements of this document may be the subject
predmet patentnih pravic. ISO ne prevzema of patent rights. ISO shall not be held responsible
odgovornosti za ugotavljanje katerihkoli ali vseh for identifying any or all such patent rights. Details
takih patentnih pravic. Podrobnosti o morebitnih of any patent rights identified during the
patentnih pravicah, opredeljenih med pripravo development of the document will be in the
tega dokumenta, bodo navedene v uvodu in/ali Introduction and/or on the ISO list of patent
na seznamu ISO s prejetimi patentnimi izjavami
declarations received (see www.iso.org/patents).
(glej www.iso.org/patents).
Morebitna trgovska imena, uporabljena v tem Any trade name used in this document is

dokumentu, so informacije za uporabnike in ne information given for the convenience of users
pomenijo podpore blagovni znamki. and does not constitute an endorsement.
Za razlago pomena specifičnih pojmov in izrazov For an explanation of the voluntary nature of
ISO, povezanih z ugotavljanjem skladnosti, ter standards, the meaning of ISO specific terms and
informacij o tem, kako ISO spoštuje načela expressions related to conformity assessment, as
Svetovne trgovinske organizacije (WTO) v well as information about ISO’s adherence to the
tehničnih ovirah pri trgovanju (TBT) glej spletno World Trade Organization (WTO) principles in the
Technical Barriers to Trade (TBT) see
mesto www.iso.org/ iso/foreword.html.
www.iso.org/iso/foreword.html.
Ta dokument je pripravil tehnični odbor This document was prepared by Technical

Mednarodne organizacije za standardizacijo Committee ISO/TC 207, Environmental
ISO/TC 207 Ravnanje z okoljem v sodelovanju s management, in collaboration with the European
tehničnim odborom Evropskega komiteja za Committee for Standardization (CEN) Technical
standardizacijo CEN/SS S26 Ravnanje z Committee CEN/SS S26, Environmental
okoljem v skladu s Sporazumom o tehničnem management, in accordance with the Agreement
sodelovanju med ISO in CEN (Dunajski on technical cooperation between ISO and CEN
sporazum). (Vienna Agreement).
5

---------------------- Page: 7 ----------------------
SIST EN ISO 14050 : 2020

Ta četrta izdaja razveljavlja in nadomešča tretjo This fourth edition cancels and replaces the third
izdajo (ISO 14050:2009), ki je bila strokovno edition (ISO 14050:2009), which has been
revidirana. Četrta izdaja je strukturirana drugače technically revised. The fourth edition is
kot tretja izdaja. Vsebuje splošnejši slovar structured differently from the third edition. It
izrazov s področja ravnanja z okoljem. presents a more generic vocabulary of
environmental management terminology.
Uporabnik naj vse povratne informacije ali Any feedback or questions on this document
vprašanja o tem dokumentu posreduje should be directed to the user’s national
nacionalnemu organu za standarde v svoji standards body. A complete listing of these
državi. Celoten seznam teh organov je na voljo bodies can be found at www .iso.org/members
na spletnem mestu www.iso.org/members.html. .html.


6

---------------------- Page: 8 ----------------------
SIST EN ISO 14050 : 2020

Uvod Introduction
Pri uvajanju in delovanju sistemov ravnanja z Communication is important in the

okoljem je pomembno komuniciranje. To je lahko implementation and operation of environmental
učinkovito le, če je uporabljeno izrazje management systems. This communication will
razumljeno enako. be most effective if there is a common
understanding of the terms used.
Za poenostavitev uskladitve izrazov in definicij v To simplify the harmonization of terms and
zvezi z ravnanjem z okoljem vsak terminološki definitions in the field of environmental
vnos v tem dokumentu vsebuje splošni izraz in management, each terminological entry in this
njegovo definicijo. Opombe k vnosu in primeri so document contains a generic term and its
zaradi dodatnih informacij ter pojasnil vključeni definition. Notes to entry and examples have
been included only in a few cases to provide
le pri nekaterih izrazih.
additional information or clarification.
Terminologija je razporejena v podtočke, od The terminology is arranged in subclauses, each

katerih vsaka predstavlja določeno poddomeno. representing a specific sub-domain. The
Zaporedje vnosov izrazov ustreza sequence of the term entries corresponds to the
konceptualnim diagramom v dodatku A. concept diagrams in Annex A.
Ta dokument je bil pripravljen v tesnem This document has been developed in close
sodelovanju z odbori in delovnimi skupinami, ki cooperation with the committees and working
sodelujejo pri pripravi in reviziji skupine groups involved in the development and revision
standardov ISO 14000. Seznam objavljenih of the ISO 14000 family of standards. A list of
dokumentov v skupini standardov ISO 14000 je published documents in the ISO 14000 family of
predstavljen v razdelku Literatura. standards is presented in the Bibliography.


7

---------------------- Page: 9 ----------------------
SIST EN ISO 14050 : 2020

Ravnanje z okoljem – Slovar Environmental management –
Vocabulary
1 Področje uporabe 1 Scope
Ta dokument opredeljuje izraze, ki se This document defines terms used in documents
uporabljajo v dokumentih s področij sistemov in the fields of environmental management
ravnanja z okoljem in orodij v podporo systems and tools in support of sustainable
trajnostnemu razvoju. Ti vključujejo sisteme development. These include management
vodenja, presoje in druge vrste ocenjevanja, systems, auditing and other types of
komunikacije, študije o odtisih, blažitev vpliva assessment, communications, footprinting
toplogrednih plinov in prilagajanje podnebnim studies, greenhouse gas mitigation and
spremembam. adaptation to climate change.
2 Zveze s standardi 2 Normative references
Ta dokument ne vsebuje zvez s standardi. There are no normative references in this
document.
3 Izrazi in definicije 3 Terms and definitions
ISO in IEC hranita terminološke zbirke podatkov ISO and IEC maintain terminological databases
za uporabo pri standardizaciji na naslednjih for use in standardization at the following
naslovih: addresses:
‒ platforma za brskanje po spletu ISO: na – ISO Online browsing platform: available at
voljo na spletnem mestu: https://www.iso.org/obp
https://www.iso.org/obp
‒ IEC Electropedia: na voljo na spletnem – IEC Electropedia: available at
mestu http://www.electropedia.org/ http://www.electropedia.org/
3.1 Splošni izrazi v zvezi s sistemi vodenja 3.1 General terms relating to management
systems
3.1.1 3.1.1
organizacija organization
oseba ali skupina ljudi, ki ima lastne funkcije z person or group of people that has its own
odgovornostmi, pooblastili in odnosi za functions with responsibilities, authorities and
doseganje svojih ciljev (3.1.6) relationships to achieve its objectives (3.1.6)
3.1.2 3.1.2
zainteresirana stranka interested party
deležnik stakeholder
oseba ali organizacija (3.1.1), ki lahko vpliva na person or organization (3.1.1) that can affect, be
neko odločitev/aktivnost, na katero lahko vpliva affected by, or perceive itself to be affected by a
neka odločitev/aktivnost ali ki domneva, da lahko decision or activity
neka odločitev/aktivnost vpliva nanjo
3.1.3 3.1.3

najvišje vodstvo top management
oseba ali skupina ljudi, ki na najvišji ravni person or group of people who directs and
usmerja in obvladuje organizacijo (3.1.1) controls an organization (3.1.1) at the highest
level
8

---------------------- Page: 10 ----------------------
SIST EN ISO 14050 : 2020

3.1.4 3.1.4
sistem vodenja management system
skupek medsebojno povezanih ali interaktivnih set of interrelated or interacting elements of an
elementov organizacije (3.1.1) za vzpostavljanje organization (3.1.1) to establish policies (3.1.5)
politike (3.1.5), ciljev (3.1.6) in procesov (3.1.9) and objectives (3.1.6), as well as processes
za doseganje teh ciljev (3.1.9) to achieve those objectives
3.1.5 3.1.5
politika policy
namere in usmeritev organizacije (3.1.1), ki jih intentions and direction of an organization
formalno izraža njeno najvišje vodstvo (3.1.3) (3.1.1), as formally expressed by its top
management (3.1.3)
3.1.6 3.1.6
cilj objective
rezultat, ki naj bi bil dosežen result to be achieved
3.1.7 3.1.7
tveganje risk
učinek negotovosti effect of uncertainty
3.1.8 3.1.8
nevarnost hazard
potencialni vir telesnih poškodb ali ogrožanja potential source of injury or damage to the health
zdravja ljudi oziroma poškodb lastnine ali okolja of people, or damage to property or the
(3.2.2)  environment (3.2.2)
3.1.9 3.1.9
proces process
skupek med seboj povezanih ali interaktivnih set of interrelated or interacting activities that
aktivnosti, ki uporabljajo ali preoblikujejo vhode uses or transforms inputs to deliver a result
za doseganje rezultata
3.1.10 3.1.10
kompetentnost competence
zmožnost uporabe znanja in veščin za ability to apply knowledge and skills to achieve
doseganje predvidenih rezultatov intended results
3.1.11 3.1.11
dokumentirane informacije documented information
informacije, ki jih mora organizacija (3.1.1) information required to be controlled and
obvladovati in vzdrževati, ter medij, ki jih vsebuje maintained by an organization (3.1.1) and the
medium on which it is contained

3.1.12 3.1.12
uspešnost performance
merljiv rezultat measurable result
3.1.13 3.1.13
nenehno izboljševanje continual improvement
ponavljajoča se aktivnost za izboljšanje recurring activity to enhance performance
uspešnosti (3.1.12) (3.1.12)
3.1.14 3.1.14
učinkovitost effectiveness
obseg, v katerem so realizirane planirane extent to which planned activities are realized
aktivnosti in so doseženi planirani rezultati and planned results achieved
9

---------------------- Page: 11 ----------------------
SIST EN ISO 14050 : 2020

3.1.15 3.1.15
zahteva requirement
potreba ali pričakovanje, ki je izraženo, na need or expectation that is stated, generally
splošno samoumevno ali obvezno implied or obligatory
3.1.16 3.1.16
skladnost conformity
izpolnitev zahteve (3.1.15) fulfilment of a requirement (3.1.15)
3.1.17 3.1.17
neskladnost nonconformity
neizpolnitev zahteve (3.1.15) non-fulfilment of a requirement (3.1.15)
3.1.18 3.1.18
popravni ukrep, korektivni ukrep corrective action
ukrep za odpravo vzroka(-ov) neskladnosti action to eliminate the cause(s) of a
(3.1.17) in preprečitev ponovitve nonconformity (3.1.17) and to prevent
recurrence
3.1.19 3.1.19
presoja audit
sistematičen in neodvisen proces (3.1.9) systematic and independent process (3.1.9) for
pridobivanja dokazov in njihovega objektivnega obtaining evidence and evaluating it objectively
vrednotenja, da se ugotovi, v kolikšnem obsegu to determine the extent to which the audit criteria
so izpolnjeni kriteriji presoje (3.4.44) (3.4.44) are fulfilled
3.1.20 3.1.20
merjenje measurement
proces (3.1.9) opredeljevanja vrednosti process (3.1.9) to determine a value
3.1.21 3.1.21
monitoring monitoring
opredeljevanje stanja sistema, procesa (3.1.9) determining the status of a system, a process
ali aktivnosti (3.1.9) or an activity
3.2 Splošni izrazi v zvezi z ravnanjem z 3.2 General terms relating to environmental
okoljem management
3.2.1 3.2.1
ravnanje z okoljem environmental management
skupek usklajenih aktivnosti v organizaciji set of coordinated activities within an
(3.1.1), povezanih z njenimi okoljskimi vidiki organization (3.1.1) related to its environmental
(3.2.20) aspects (3.2.20)
3.2.2 3.2.2
okolje environment
okolica, v kateri organizacija (3.1.1) deluje in ki surroundings in which an organization (3.1.1)
vključuje zrak, vodo, tla (3.8.16), naravne vire operates, including air, water, land (3.8.16),
(3.2.5), rastlinstvo, živalstvo, ljudi in njihove natural resources (3.2.5), flora, fauna, humans
medsebojne odnose and their interrelationships
3.2.3 3.2.3
ekosistem ecosystem
dinamičen skupek združb rastlin, živali in dynamic complex of communities of plants,
mikroorganizmov ter njihovega neživega okolja, animals and microorganisms and their non-living
ki delujejo kot funkcionalna celota environment, interacting as a functional entity
10

---------------------- Page: 12 ----------------------
SIST EN ISO 14050 : 2020

3.2.4 3.2.4
storitev ekosistema ecosystem service
koristi, ki jih ljudje pridobijo od enega ali več benefit people obtain from one or several
ekosistemov (3.2.3) ecosystems (3.2.3)
3.2.5 3.2.5
naravni vir natural resource
del narave, ki je koristen za ljudi ali prispeva k part of nature that provides benefits to humans
človekovemu dobremu počutju or underpins human well-being
3.2.6 3.2.6
izhodiščno stanje v okolju environmental baseline
stanje okolja (3.2.2) brez upoštevane state of the environment (3.2.2) without the
spremembe change that is considered
3.2.7 3.2.7
ciljna skupina target group
zainteresirana stranka (3.1.2) ali stranke, interested party (3.1.2) or interested parties
izbrana(-e) kot žarišče aktivnosti okoljskega selected as the focus of an organization’s (3.1.1)
komuniciranja (3.7.19) organizacije (3.1.1) environmental communication (3.7.19) activity
3.2.8 3.2.8
tretja stranka third party
oseba ali organ, ki ga vključene stranke v zvezi person or body that is recognized as being
s predmetom obravnave priznajo za independent of the parties involved, as concerns
neodvisnega the issues in question
3.2.9 3.2.9
trajnostni razvoj sustainable development
razvoj, ki izpolnjuje današnje potrebe, ne da bi development that meets the needs of the present
pri tem ogrožal zmožnosti prihodnjih generacij, without compromising the ability of future
da zadostijo svojim potrebam generations to meet their own needs
3.2.10 3.2.10
preprečevanje onesnaževanja prevention of pollution
uporaba procesov (3.1.9), praks, tehnik, use of processes (3.1.9), practices, techniques,
materialov, proizvodov (3.5.12) ali energije za materials, products (3.5.12), or energy to avoid,
izogibanje, zmanjševanje ali obvladovanje reduce or control (separately or in combination)
(ločeno ali v kombinaciji) nastajanja, izpuščanja the creation, emission or discharge of any type
ali izlivanja vseh vrst onesnaževal ali odpadkov, of pollutant or waste, in order to reduce adverse
da se zmanjšajo škodljivi vplivi na okolje (3.2.22) environmental impacts (3.2.22)
3.2.11 3.2.11
področje skrbi area of concern
vidik naravnega okolja, zdravja ljudi ali virov, ki aspect of the natural environment, human health
so v interesu družbe or resources of interest to society
3.2.12 3.2.12
okoljska tematika environmental topic area
področje zanimanja ali skrbi ravnanja z okoljem area of interest or concern for environmental
(3.2.1) v organizaciji (3.1.1) glede na okolje, v management (3.2.1) in an organization (3.1.1) in
katerem je organizacija relation to its surroundings
3.2.13 3.2.13
metodologija methodology
skupek sredstev ali postopkov (3.3.6), set of means or procedures (3.3.6) used for a
uporabljenih za določen namen specific purpose
11

---------------------- Page: 13 ----------------------
SIST EN ISO 14050 : 2020

3.2.14 3.2.14
transparentnost transparency
odprta, celovita in razumljiva predstavitev open, comprehensive and understandable
informacij presentation of information
3.2.15 3.2.15
primerjalna točka benchmark
referenčna točka za namene primerjave reference point against which comparisons can
be made
3.2.16 3.2.16
pravični delež equity share
obseg pravic, ki jih ima organizacija (3.1.1) v extent of the rights an organization (3.1.1) has to
zvezi s tveganji (3.1.7) in nagradami iz naslova the risks (3.1.7) and rewards from an operation
delovanja na podlagi svojega lastniškega deleža based on its equity interest
3.2.17 3.2.17
lokalna oblast local authority
javni organ, ki je z zakonodajo ali direktivami public body given the authority by legislation or
višje ravni oblasti pooblaščen za določanje directives of a higher level of government to set
splošnih politik (3.1.5), planov ali zahtev (3.1.15) general policies (3.1.5), plans or requirements
(3.1.15)
3.2.18 3.2.18
lokacija site
geografsko omejeno območje, znotraj katerega location with geographical boundaries and on
se lahko izvajajo aktivnosti, ki jih organizacija which activities under the control of an
(3.1.1) nadzoruje organization (3.1.1) can be carried out
3.2.19 3.2.19
objekt facility
posamezna naprava, skupek naprav ali single installation, set of installations or
proizvodni procesi (3.1.9) (nepremični ali production processes (3.1.9) (stationary or
premični), ki jih je mogoče opredeliti znotraj mobile), which can be defined within a single
posamezne geografske meje, organizacijske geographical boundary, organizational unit or
enote a
...

SLOVENSKI STANDARD
oSIST prEN ISO 14050:2019
01-december-2019
Ravnanje z okoljem - Slovar (ISO/DIS 14050:2019)
Environmental management - Vocabulary (ISO/DIS 14050:2019)
Umweltmanagement - Begriffe (ISO/DIS 14050:2019)
Management environnemental - Vocabulaire (ISO/DIS 14050:2019)
Ta slovenski standard je istoveten z: prEN ISO 14050
ICS:
01.040.13 Okolje. Varovanje zdravja. Environment. Health
Varnost (Slovarji) protection. Safety
(Vocabularies)
13.020.10 Ravnanje z okoljem Environmental management
oSIST prEN ISO 14050:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 14050:2019

---------------------- Page: 2 ----------------------
oSIST prEN ISO 14050:2019
DRAFT INTERNATIONAL STANDARD
ISO/DIS 14050
ISO/TC 207 Secretariat: SCC
Voting begins on: Voting terminates on:
2019-09-25 2019-12-18
Environmental management — Vocabulary
Management environnemental — Vocabulaire
ICS: 13.020.10; 01.040.13
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 14050:2019(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2019

---------------------- Page: 3 ----------------------
oSIST prEN ISO 14050:2019
ISO/DIS 14050:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 14050:2019
ISO/DIS 14050:2019(E)
Contents
Foreword . iv
Introduction. v
3.1 Terms from High level structure . 1
3.2 General terms relating to environmental management . 3
3.3 Terms relating to environmental management system . 7
3.4 Terms relating to verification, validation and auditing . 8
3.5 Terms relating to product system . 13
3.6 Terms relating to life cycle assessment . 17
3.7 Terms relating to environmental labelling and declarations and to environmental
communication . 21
3.8 Terms relating to climate change and climate action . 25
3.9 Terms relating to greenhouse gases . 28
3.10 Terms relating to water footprint . 33
3.11 Terms relating to carbon footprint . 36
3.12 Terms relating to economy and finance . 37
Annex A (informative) Methodology used in the development of the vocabulary . 40
Annex B (informative) Concept diagrams . 43
Annex C (informative) Use of concepts in other documents . 62
3.1 Terms from High level structure . 62
3.2 General terms relating to environmental management . 63
3.3 Terms relating to environmental management system . 64
3.4 Terms relating to verification, validation and auditing . 64
3.5 Terms relating to product system . 65
3.6 Terms relating to life cycle assessment . 67
3.7 Terms relating to environmental labelling and declarations and to environmental
communication . 68
3.8 Terms relating to climate change and climate action . 69
3.9 Terms relating to greenhouse gases . 69
3.10 Terms relating to water footprint . 71
3.11 Terms relating to carbon footprint . 71
Alphabetical index . 73
Bibliography . 81

© ISO 2019 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 14050:2019
ISO/DIS 14050:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on
the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO’s adherence to the World
Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 207, Environmental management.
This fourth edition cancels and replaces the third edition (ISO 14050:2009), which has been technically
revised. The fourth edition is structured differently from the third edition. It presents a more generic
vocabulary of environmental management terminology.
A list of all documents in the ISO 14000 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv © ISO 2019– All rights reserved

---------------------- Page: 6 ----------------------
oSIST prEN ISO 14050:2019
ISO/DIS 14050:2019(E)
Introduction
Communication is important in the implementation and operation of environmental management
systems. This communication will be most effective if there is a common understanding of the terms used.
With the aim of simplifying the harmonization of terms and definitions in the field of environmental
management, each terminological entry contains a generic definition. Notes to entry and examples have
been included only in a few cases. Standards developers may add notes to entry and examples as needed
to adapt each entry to serve the purpose of each individual document.
The terminology is arranged in sub-clauses, each representing a specific sub-domain. One of these sub-
clauses (3.1) contains terms and definitions intended to be used in all management system standards.
The sequence of the term entries corresponds to the concept diagrams in Annex B.
ISO/IEC Directives, Part 1, Annex L (previously Annex SL of the ISO Supplement), “Proposals for
management system standards” includes terms and definitions to be used in all management system
standard. This is an important terminology source for this document.
ISO/IEC Directives, Part 1, Annex M (previously Annex SP of the ISO Supplement), “Policy for the
development of sector-specific management standards and sector-specific management system
standards (MSS)” stipulates rules for the use of ISO 14050 terminology in environmental management
standards, in particular in sub-clauses M.5.2.5 and M.5.2.6:
M.5.2.5  Technical committee, subcommittee, project committee (SyC in IEC) or International
Workshop developing sector-, aspect- or element-specific environmental management standards
shall: …
— include the normative reference of the appropriate generic ISO 14050 terms and definitions; …
M.5.2.6  Any requests for guidance on this sector-, aspect- or element-specific policy or for
interpretation of generic ISO 14000 series standards or ISO 14050 terms and definitions or for
guidance on a sector-, aspect- or element-specific document shall be submitted to the ISO Central
Secretariat as well as the relevant TC 207 subcommittee.
This document has been developed in close cooperation with committees and working groups involved
in the development and revision of the ISO 14000 series of International Standards, Technical Reports
and Technical Specifications. A complete list of published documents in the ISO 14000 series is presented
in the Bibliography in this document.


© ISO 2019 – All rights reserved v

---------------------- Page: 7 ----------------------
oSIST prEN ISO 14050:2019

---------------------- Page: 8 ----------------------
oSIST prEN ISO 14050:2019
DRAFT INTERNATIONAL STANDARD ISO/DIS 14050:2019(E)
Environmental management — Vocabulary
1 Scope
This document contains terms and definitions used in standards in the field of environmental
management systems and tools in support of sustainable development. These include management
systems, auditing and different types of assessment, communications, footprinting, greenhouse gas
management and adaptation to climate change.
The terms and definitions given in this document are intended to be guiding reference for future and
revised documents in the ISO 14000 series.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at http://www.electropedia.org/
NOTE 1 See Annex C for reference to where each concept has been defined in other documents.
NOTE 2 The “High level structure (HLS)” referenced in 3.1 is Appendix 2 of Annex L of the ISO/IEC Directives, “High
level structure, identical core text, common terms and core definitions”.
3.1 Terms from High level structure
3.1.1
organization
person or group of people that has its own functions with responsibilities, authorities and relationships
to achieve its objectives (3.1.7)
3.1.2
interested party
stakeholder
person or organization (3.1.1) that can affect, be affected by, or perceive itself to be affected by a decision
or activity
3.1.3
top management
person or group of people who directs and controls an organization (3.1.1) at the highest level
© ISO 2019 – All rights reserved 1

---------------------- Page: 9 ----------------------
oSIST prEN ISO 14050:2019
ISO/DIS 14050 (2019-07-08)
Environmental management — Vocabulary
© ISO 2019 – All rights reserved 1

---------------------- Page: 10 ----------------------
oSIST prEN ISO 14050:2019
ISO/DIS 14050:2019(E)
3.1.4
management system
set of interrelated or interacting elements of an organization (3.1.1) to establish policies (3.1.6) and
objectives (3.1.7) and processes (3.1.8) to achieve those objectives
3.1.5
risk
effect of uncertainty
3.1.6
policy
intentions and direction of an organization (3.1.1) as formally expressed by its top management (3.1.3)
3.1.7
objective
result to be achieved
3.1.8
process
set of interrelated or interacting activities which transforms inputs into outputs
3.1.9
competence
ability to apply knowledge and skills to achieve intended results
3.1.10
documented information
information required to be controlled and maintained by an organization (3.1.1) and the medium on
which it is contained
3.1.11
performance
measurable result
3.1.12
continual improvement
recurring activity to enhance performance (3.1.11)
3.1.13
requirement
need or expectation that is stated, generally implied or obligatory
3.1.14
conformity
fulfilment of a requirement (3.1.13)
2 © ISO 2019 – All rights reserved

---------------------- Page: 11 ----------------------
oSIST prEN ISO 14050:2019
ISO/DIS 14050:2019(E)
3.1.15
nonconformity
non-fulfilment of a requirement (3.1.13)
3.1.16
corrective action
action to eliminate the cause of a nonconformity (3.1.15) and to prevent recurrence
3.1.17
audit
systematic, independent and documented process (3.1.8) for obtaining objective evidence (3.4.33) and
evaluating it objectively to determine the extent to which the audit criteria (3.4.42) are fulfilled
[SOURCE: ISO 19011:2018, 3.1]
3.1.18
measurement
process (3.1.8) to determine a value
3.1.19
monitoring
determining the status of a system, a process (3.1.8) or an activity
3.1.20
effectiveness
extent to which planned activities are realized and planned results achieved
3.1.21
outsource
make an arrangement where an external organization (3.1.1) performs part of an organization’s function
or process (3.1.8)
3.2 General terms relating to environmental management
3.2.1
environmental management
set of coordinated activities within an organization (3.1.1) related to its environmental aspects (3.2.22)
3.2.2
environment
surroundings in which an organization (3.1.1) operates, including air, water, land (3.8.17), natural
resources (3.2.5), flora, fauna, humans and their interrelation
3.2.3
ecosystem
dynamic complex of communities of plants, animals and microorganisms and their non-living
environment (3.2.2), interacting as a functional entity
© ISO 2019 – All rights reserved 3

---------------------- Page: 12 ----------------------
oSIST prEN ISO 14050:2019
ISO/DIS 14050:2019(E)
3.2.4
ecosystem service
benefit people obtain from one or several ecosystems (3.2.3)
3.2.5
natural resource
part of nature which provides benefits to humans or underpins human well-being
3.2.6
environmental baseline
state of environment (3.2.2) without the change that is considered
3.2.7
target group
interested party (3.1.2) or parties selected as the focus of an organization’s (3.1.1) environmental
communication (3.7.17) activity
3.2.8
third party
person or body that is recognized as being independent of the parties involved, as concerns the issues in
question
3.2.9
customer
person or organization (3.1.1) that could or does receive a product (3.5.2) or a service that is intended for
or required by this person or organization
3.2.10
customer service
interaction of the organization (3.1.1) with the customer (3.2.9) throughout the life cycle (3.6.1) of a
product (3.5.2)
3.2.11
sustainable development
development that meets the needs of the present without compromising the ability of future
generations to meet their own needs
3.2.12
prevention of pollution
use of processes (3.1.8), practices, techniques, materials, products, services or energy to avoid, reduce or
control (separately or in combination) the creation, emission or discharge of any type of pollutant or
waste, in order to reduce adverse environmental impacts (3.2.24)
3.2.13
activity data
quantitative measure of an activity that results in an environmental impact (3.2.24)
4 © ISO 2019 – All rights reserved

---------------------- Page: 13 ----------------------
oSIST prEN ISO 14050:2019
ISO/DIS 14050:2019(E)
3.2.14
methodology
specific set of means or procedures (3.3.6) used in attaining an end
3.2.15
transparency
open, comprehensive and understandable presentation of information
3.2.16
benchmark
reference point against which comparisons can be made
3.2.17
reporting unit
quantified performance (3.1.11) expression of the organization (3.1.1) under study to be used as a
reference
3.2.18
equity share
extent of the rights an organization (3.1.1) has to the risks (3.1.5) and rewards from an operation based
on its equity interest
3.2.19
local authority
public body given the authority by legislation or directives of a higher level of government to set
general policies (3.1.6), plans or requirements (3.1.13)
3.2.20
site
location with geographical boundaries and on which activities under the control of an organization
(3.1.1) may be carried out
3.2.21
facility
single installation, set of installations or production processes (3.1.8) (stationary or mobile), which can
be defined within a single geographical boundary, organizational unit or production process
3.2.22
environmental aspect
element of an organization’s (3.1.1) activities or products (3.5.2) that interacts or can interact with the
environment (3.2.2)
3.2.23
environmental impact pathway
series of consecutive, causal relationships, ultimately starting at an environmental aspect (3.2.22) and
ending at an environmental impact (3.2.24)
© ISO 2019 – All rights reserved 5

---------------------- Page: 14 ----------------------
oSIST prEN ISO 14050:2019
ISO/DIS 14050:2019(E)
3.2.24
environmental impact
change to the environment (3.2.2), whether adverse or beneficial, including possible consequences,
wholly or partially resulting from an organization’s (3.1.1) environmental aspects (3.2.22)
3.2.25
environmental condition
state or characteristic of the environment (3.2.2) as determined at a certain point in time
3.2.26
environmental performance
performance (3.1.11) related to the management of environmental aspects (3.2.22)
3.2.27
environmental performance evaluation
EPE
process (3.1.8) to facilitate management decisions regarding an organization’s (3.1.1) environmental
performance (3.2.26) by selecting indicators (3.2.31), collecting and analysing data, assessing information
against environmental performance (3.2.26) criteria, reporting and communicating, and periodically
reviewing and improving this process
3.2.28
environmental performance indicator
EPI
indicator (3.2.31) that provides information about an organization’s (3.1.1) environmental performance
(3.2.26)
3.2.29
management performance indicator
MPI
environmental performance indicator (3.2.28) that provides information about the management efforts to
influence an organization’s (3.1.1) environmental performance (3.2.26)
3.2.30
operational performance indicator
OPI
environmental performance indicator (3.2.28) that provides information about the environmental
performance (3.2.26) of an organization’s (3.1.1) operation
3.2.31
indicator
quantitative, qualitative or binary variable that can be measured or described, representing the status
of operations, management, conditions or impacts
3.2.32
key performance indicator
KPI
indicator (3.2.31) of performance (3.1.11) deemed by an organization (3.1.1) to be significant and giving
prominence and attention to certain aspects of operations, management, conditions or impacts
6 © ISO 2019 – All rights reserved

---------------------- Page: 15 ----------------------
oSIST prEN ISO 14050:2019
ISO/DIS 14050:2019(E)
3.2.33
combined indicator
indicator (3.2.31) which includes information on more than one aspect of operations, management,
conditions or impacts
3.2.34
environmental condition indicator
indicator (3.2.31) that provides information about the local, regional, national or global environmental
condition (3.2.25)
3.2.35
area of concern
aspect of the natural environment (3.2.2), human health or resources of interest to society
3.3 Terms relating to environmental management system
3.3.1
environmental management system
EMS
part of the management system (3.1.4) used to manage environmental aspects (3.2.22), fulfil compliance
obligations (3.3.4), and address risks (3.1.5) and opportunities
3.3.2
environmental policy
policy (3.1.6) related to environmental performance (3.2.26)
3.3.3
environmental objective
objective (3.1.7) set by the organization (3.1.1) and consistent with its environmental policy (3.3.2)
3.3.4
compliance obligation
legal requirements that an organization (3.1.1) has to comply with and other requirements (3.1.13) that
an organization has to or chooses to comply with
3.3.5
maturity level
level of achievement in a scale of maturity of environmental management system (3.3.1) elements
3.3.6
procedure
specified way to carry out an activity or a process (3.1.8)
© ISO 2019 – All rights reserved 7

---------------------- Page: 16 ----------------------
oSIST prEN ISO 14050:2019
ISO/DIS 14050:2019(E)
3.4 Terms relating to verification, validation and auditing
3.4.1
verification
conformity assessment
confirmation through the provision of objective evidence (3.4.33), that specified requirements (3.1.13)
have been fulfilled
3.4.2
verification team
one or more verifiers (3.4.4) conducting a verification (3.4.1), supported if needed by technical experts
(3.4.37)
3.4.3
verification body
body that performs verifications (3.4.1)
3.4.4
verifier
competent and independent person, or persons, with responsibility for performing and reporting on the
verification (3.4.1) process (3.1.8)
3.4.5
verification plan
planning document detailing the implementation of environmental technology verification (3.4.8)
3.4.6
verification report
document detailing environmental technology verification (3.4.8) and its results
3.4.7
environmental claim verification
confirmation of the validity of an environmental claim (3.7.4) using specific predetermined criteria and
procedures (3.3.6) with assurance of data reliability
3.4.8
environmental technology verification
verification (3.4.1) of the performance (3.1.11) of an environmental technology (3.4.10) by a verifier (3.4.4)
3.4.9
technology
application of scientific knowledge, tools, techniques, crafts or systems in order to solve a problem or to
achieve an objective (3.1.7) which can result in a product (3.5.2) or process (3.1.8)
8 © ISO 2019 – All rights reserved

---------------------- Page: 17 ----------------------
oSIST prEN ISO 14050:2019
ISO/DIS 14050:2019(E)
3.4.10
environmental technology
technology (3.4.9) that either results in an environmental added value (3.6.15) or measures parameters
that indicate an environmental impact (3.2.24)
3.4.11
applicant
organization (3.1.1) proposing a technology (3.4.9) for which performance (3.1.11) will be verified through
an environmental technology verification (3.4.8)
3.4.12
intrusive investigation
sampling and testing using instruments or requiring physical interference
3.4.13
professional scepticism
attitude that includes a questioning mind and a critical assessment of evidence
3.4.14
completeness check
process (3.1.8) to determine whether information from the phases of a life cycle assessment (3.6.2) is
sufficient for reaching conclusions in accordance with the goal and scope definition
3.4.15
consistency check
process (3.1.8) to determine whether the assumptions, methods and data are consistently applied
throughout the study and are in accordance with the goal and scope definition performed before
conclusions are reached
3.4.16
sensitivity check
process (3.1.8) to determine that the information obtained from a sensitivity analysis (3.6.19) is relevant
for reaching the conclusions and giving recommendations
3.4.17
test body
organization (3.1.1) providing an environment for testing, test implementation and means for
performing and reporting on the testing of an environmental technology (3.4.10)
3.4.18
test plan
planning document detailing the principles, test methods, conditions, procedures (3.3.6) and data quality
(3.6.42) required to carry out testing and to produce test data
3.4.19
test report
document describing conditions and results of testing
© ISO 2019 – All rights reserved 9

---------------------- Page: 18 ----------------------
oSIST prEN ISO 14050:2019
ISO/DIS 14050:2019(E)
3.4.20
validation
confirmation through the provision of objective evidence (3.4.33), that the requirements (3.1.13) for a
specific intended use or application have been fulfilled
3.4.21
validation team
one or more validators (3.4.23) conducting a validation (3.4.20), supported if needed by technical experts
(3.4.37)
3.4.22
validation body
body that performs validations (3.4.20)
3.4.23
validator
competent and independent person or persons with responsibility for performing a validation (3.4.20)
and reporting on the results of the validation
3.4.24
complaint
expression of dissatisfaction, other than appeal, by any person or organization (3.1.1) to another person
or organization, relating to its activities, where a response is expected
3.4.25
validation criteria
policy (3.1.6), procedure (3.3.6) or requirement (3.1.13) used as a reference against which evidence is
compared
3.4.26
level of assurance
degree of assurance the intended user requires in a validation (3.4.20) or verification (3.4.1)
3.4.27
conflict of interest
situation in which, because of other activities or relationships, impartiality in performing validation
(3.4.20) or verification (3.4.1) activities is or could be compromised
3.4.28
accreditation
third-party attestation related to a validation body (3.4.22), verification body (3.4.3) or a certification body
conveying formal demonstration of its competence (3.1.9) to carry out specific validation (3.4.20) or
verification (3.4.1) tasks
3.4.29
accreditation body
authority that performs accreditation (3.4.28)
10 © ISO 2019 – All rights reserved

---------------------- Page: 19 ----------------------
oSIST prEN ISO 14050:2019
ISO/DIS 14050:2019(E)
3.4.30
combined audit
audit (3.1.17) carried out together at a single auditee (3.4.35) on two or more management systems (3.1.4)
[SOURCE: ISO 19011:2018, 3.2]
3.4.31
joint audit
audit (3.1.17) carried out at a single auditee (3.4.35) by two or more auditing organizations (3.1.1)
[SOURCE: ISO 19011:2018, 3.3]
3.4.32
internal audit
audit (3.1.17) where the audit team (3.4.36) belongs to the auditee (3.4.35)
3.4.33
objective evidence
data supporting the existence or verity of something
[SOURCE: ISO 19011:2018, 3.8]
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.