Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods (IEC 62282-6-200:2016)

This part of IEC 62282 specifies test methods for the performance evaluation of micro fuel cell
power systems for laptop computers, mobile phones, personal digital assistants (PDAs),
cordless home appliances, TV broadcast cameras, autonomous robots, etc.
This document describes the performance test methods for power characteristics, and
mechanical durability for micro fuel cell power systems with output up to 60 V DC and 240 VA.
The functional arrangement of a typical example of a micro fuel cell power system, evaluated
according to this document, is shown in Figure 1.
This document does not address the safety of micro fuel cell power systems.
This document does not address the interchangeability of micro fuel cell power systems.

Brennstoffzellentechnologien - Teil 6-200: Mikro-Brennstoffzellen-Energiesysteme - Leistungskennwerteprüfverfahren (IEC 62282-6-200:2016)

Technologies des piles à combustible - Partie 6-200: Systèmes à micro-piles à combustible - Méthodes d'essai des performances (IEC 62282-6-200:2016)

L'IEC 62282-6-200:2016 spécifie des méthodes d'essai pour l'évaluation des performances des systèmes à micropiles à combustible pour les ordinateurs portables, les téléphones mobiles, les assistants numériques personnels (PDA), les appareils électroménagers sans fil, les caméras de télédiffusion, les robots autonomes, etc. Cette nouvelle édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
- suppression de 5.3 (Essai de consommation de combustible) car il ne permettait pas de mesurer la vitesse de consommation réelle de certains types de combustibles;
- addition et modification de certains termes et définitions.

Tehnologija gorivnih celic - 6-200. del: Tehnologija mikro gorivnih celic - Preskusne metode delovanja (IEC 62282-6-200:2016)

Ta del standarda IEC 62282 določa preskusne metode za ocenjevanje delovanja napajalnih sistemov z mikro gorivnimi celicami za prenosne računalnike, mobilne telefone, osebne digitalne beležnice (PDA), brezžične gospodinjske aparate, televizijske kamere, avtonomne robote idr.
Ta standard opisuje preskusne metode delovanja za električne lastnosti in mehanično vzdržljivost napajalnih sistemov z mikro gorivnimi celicami, ki imajo izhodno napetost do 60 V DC in 240 VA. Funkcionalna razporeditev značilnega primera napajalnega sistema z mikro gorivnimi celicami, ki je ocenjena v skladu s tem dokumentom, je prikazana na sliki 1.
Ta dokument ne obravnava varnosti napajalnih sistemov z mikro gorivnimi celicami.
Ta dokument ne obravnava zamenljivosti napajalnih sistemov z mikro gorivnimi celicami.

General Information

Status
Published
Publication Date
06-Feb-2017
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Feb-2017
Due Date
08-Apr-2017
Completion Date
07-Feb-2017

Relations

Buy Standard

Standard
EN 62282-6-200:2017
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62282-6-200:2017
01-april-2017
1DGRPHãþD
SIST EN 62282-6-200:2012
Tehnologija gorivnih celic - 6-200. del: Tehnologija mikro gorivnih celic -
Preskusne metode delovanja (IEC 62282-6-200:2016)
Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test
methods (IEC 62282-6-200:2016)
Brennstoffzellentechnologien - Teil 6-200: Mikro-Brennstoffzellen-Energiesysteme -
Leistungskennwerteprüfverfahren (IEC 62282-6-200:2016)
Technologies des piles à combustible - Partie 6-200: Systèmes à micro-piles à
combustible - Méthodes d'essai des performances (IEC 62282-6-200:2016)
Ta slovenski standard je istoveten z: EN 62282-6-200:2017
ICS:
27.070 Gorilne celice Fuel cells
SIST EN 62282-6-200:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62282-6-200:2017

---------------------- Page: 2 ----------------------

SIST EN 62282-6-200:2017


EUROPEAN STANDARD EN 62282-6-200

NORME EUROPÉENNE

EUROPÄISCHE NORM
January 2017
ICS 27.070 Supersedes EN 62282-6-200:2012
English Version
Fuel cell technologies -
Part 6-200: Micro fuel cell power systems -
Performance test methods
(IEC 62282-6-200:2016)
Technologies des piles à combustible -  Brennstoffzellentechnologien -
Partie 6-200: Systèmes à micropiles à combustible - Teil 6-200: Mikro-Brennstoffzellen-Energiesysteme -
Méthodes d'essai des performances Leistungskennwerteprüfverfahren
(IEC 62282-6-200:2016) (IEC 62282-6-200:2016)
This European Standard was approved by CENELEC on 2016-10-27. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62282-6-200:2017 E

---------------------- Page: 3 ----------------------

SIST EN 62282-6-200:2017
EN 62282-6-200:2017
European foreword
The text of document 105/527/CDV, future edition 3 of IEC 62282-6-200, prepared by IEC/TC 105
"Fuel cell technologies" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC
as EN 62282-6-200:2017.
The following dates are fixed:
(dop) 2017-07-27
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2019-10-27
• latest date by which the national standards conflicting with
the document have to be withdrawn

This document supersedes EN 62282-6-200:2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62282-6-200:2016 was approved by CENELEC as a
European Standard without any modification.
2

---------------------- Page: 4 ----------------------

SIST EN 62282-6-200:2017
EN 62282-6-200:2017
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 60068-2-6 -  Environmental testing - EN 60068-2-6 -
Part 2-6: Tests - Test Fc: Vibration
(sinusoidal)
IEC 60721-3-7 -  Classification of environmental conditions - EN 60721-3-7 -
Part 3: Classification of groups of
environmental parameters and their
severities -
Section 7: Portable and non-stationary use
IEC/TS 62282-1 2013 Fuel cell technologies - - -
Part 1: Terminology
ISO/IEC 17025 -  General requirements for the competence of EN ISO/IEC 17025 -
testing and calibration laboratories

3

---------------------- Page: 5 ----------------------

SIST EN 62282-6-200:2017

---------------------- Page: 6 ----------------------

SIST EN 62282-6-200:2017



IEC 62282-6-200

®


Edition 3.0 2016-09




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Fuel cell technologies –

Part 6-200: Micro fuel cell power systems – Performance test methods




Technologies des piles à combustible –

Partie 6-200: Systèmes à micropiles à combustible – Méthodes d’essai

des performances















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 27.070 ISBN 978-2-8322-3628-4



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 62282-6-200:2017
– 2 – IEC 62282-6-200:2016 © IEC 2016
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references. 6
3 Terms and definitions . 7
4 General principles . 8
4.1 Testing environment . 8
4.2 Minimum required measurement accuracy . 8
4.3 Measuring instruments . 9
4.3.1 General . 9
4.3.2 Voltage . 9
4.3.3 Current . 9
4.3.4 Time . 9
4.3.5 Weight . 9
4.3.6 Temperature . 9
4.3.7 Humidity . 9
4.3.8 Pressure . 9
4.3.9 Vibration frequency . 9
4.3.10 Volume . 9
5 Tests . 10
5.1 Test procedure . 10
5.2 Power generation characteristics . 10
5.2.1 Starting duration . 10
5.2.2 Rated power test and rated voltage test . 10
5.2.3 Power generation test after idle condition . 10
5.2.4 Power generation test at low and high temperatures . 11
5.2.5 Power generation test under low and high humidity conditions . 11
5.2.6 Altitude test . 11
5.3 Mechanical durability tests . 12
5.3.1 Drop test . 12
5.3.2 Vibration test . 12
6 Labelling and marking . 13
7 Test report . 13
Bibliography . 17

Figure 1 – Micro fuel cell power system block diagram . 6

Table 1 – Drop height . 12
Table 2 – Vibration condition . 13
Table 3 – Test report of micro fuel cell power system – Performance test . 14

---------------------- Page: 8 ----------------------

SIST EN 62282-6-200:2017
IEC 62282-6-200:2016 © IEC 2016 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
_____________

FUEL CELL TECHNOLOGIES –

Part 6-200: Micro fuel cell power systems –
Performance test methods

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62282-6-200 has been prepared by IEC technical committee 105:
Fuel cell technologies.
This third edition cancels and replaces the second edition, published in 2012. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) deletion of 5.3 (Fuel consumption test) as it was impractical to measure the actual
consumption rate of some kinds of fuels;
b) addition and modification of some terms and definitions.

---------------------- Page: 9 ----------------------

SIST EN 62282-6-200:2017
– 4 – IEC 62282-6-200:2016 © IEC 2016
The text of this standard is based on the following documents:
CDV Report on voting
105/527/CDV 105/545A/RVC

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC 62282 series, published under the general title Fuel cell
technologies, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

---------------------- Page: 10 ----------------------

SIST EN 62282-6-200:2017
IEC 62282-6-200:2016 © IEC 2016 – 5 –
INTRODUCTION
With advancements in technology, the expectation or demand for the commercial introduction
of fuel cells has increased dramatically in recent years. It is especially strong for micro fuel
cell power systems intended for applications in laptop computers, mobile phones, personal
digital assistants (PDAs), cordless home appliances, TV broadcast cameras, autonomous
robots, etc. The essential component of a micro fuel cell power system is its power unit. Some
micro fuel cell power systems have built-in power units and others have external power units.

---------------------- Page: 11 ----------------------

SIST EN 62282-6-200:2017
– 6 – IEC 62282-6-200:2016 © IEC 2016
FUEL CELL TECHNOLOGIES –

Part 6-200: Micro fuel cell power systems –
Performance test methods



1 Scope
This part of IEC 62282 specifies test methods for the performance evaluation of micro fuel cell
power systems for laptop computers, mobile phones, personal digital assistants (PDAs),
cordless home appliances, TV broadcast cameras, autonomous robots, etc.
This document describes the performance test methods for power characteristics, and
mechanical durability for micro fuel cell power systems with output up to 60 V DC and 240 VA.
The functional arrangement of a typical example of a micro fuel cell power system, evaluated
according to this document, is shown in Figure 1.
This document does not address the safety of micro fuel cell power systems.
This document does not address the interchangeability of micro fuel cell power systems.
Water/
byproduct
Micro fuel cell power unit
Aqueous
discharge
Water/byproduct
reservoir/
Waste
management
Water
Aqueous supply reservoir
cartridge
(optional) Internal power (optional)
(optional)
needs
Fuel
(optional)
management
Fuel supply
Waste
system
Micro cartridge
Internal
Fuel fuel cell (optional)
Power
reservoir
Power
reservoir
or micro
output
(optional)
conditioning
fuel cell
module
Optional
combined
cartridge
Air Primary or
housing
management secondary
battery or
system
Thermal
capacitor
management
(optional)
Fuel
cartridge
Balance of
Waste
Control
plant
heat
Air
system
External
Micro fuelcell power system
control
IEC

Figure 1 – Micro fuel cell power system block diagram
2 Normative references
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition

---------------------- Page: 12 ----------------------

SIST EN 62282-6-200:2017
IEC 62282-6-200:2016 © IEC 2016 – 7 –
cited applies. For undated references, the latest edition of the referenced document (including
any amendments) applies.
IEC 60068-2-6, Environmental testing – Part 2-6: Tests – Test Fc: Vibration (sinusoidal)
IEC 60721-3-7, Classification of environmental conditions – Part 3-7: Classification of groups
of environmental parameters and their severities – Portable and non-stationary use
IEC TS 62282-1:2013, Fuel cell technologies – Part 1: Terminology
ISO/IEC 17025, General requirements for the competence of testing and calibration
laboratories
3 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC TS 62282-1:2013
and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
NOTE Some terms have been taken from IEC TS 62282-1 and modified for the needs of this document.
3.1
conditioning
placing the micro fuel cell power system in the pre-generation state in the testing environment
for a period of time to make the system adjusted to the environment under the prescribed test
conditions, prior to a performance test
[SOURCE: IEC TS 62282-1:2013, 3.22, modified]
3.2
micro fuel cell power system
DC power source providing electric power from a fuel cell that includes a fuel cartridge,
provides not more than 60 V DC output voltage and 240 VA output power, and is connected to
a hand-held or wearable electronic device by flexible cord(s) and plug arrangement or
termination connectors integrated into the casing of the portable DC electric device
Note 1 to entry: Examples of hand-held or wearable electronic device are a laptop computer, mobile phone, PDA,
cordless home appliance, TV broadcast camera and autonomous robot.
[SOURCE: IEC TS 62282-1:2013, 3.49.1, modified]
3.3
rated current
maximum continuous electric output current that a micro fuel cell power system is designed to
achieve at the rated voltage under normal operation conditions specified by the manufacturer
[SOURCE: IEC TS 62282-1:2013, 3.25.2, modified]
3.4
rated power
maximum continuous electric output power that a micro fuel cell power system is designed to
achieve under normal operating conditions specified by the manufacturer

---------------------- Page: 13 ----------------------

SIST EN 62282-6-200:2017
– 8 – IEC 62282-6-200:2016 © IEC 2016
[SOURCE: IEC TS 62282-1:2013, 3.85.4, modified]
3.5
rated voltage
voltage assigned by the manufacturer for the output of micro fuel cell power system
3.6
pre-generation state
state of a micro fuel cell power system with zero electrical output power yet capable of being
promptly switched to a state with substantial electric active output power
[SOURCE: IEC TS 62282-1:2013, 3.110.4, modified]
3.7
starting duration
period required for transitioning from the pre-generation state to reach within ±10 % the rated
voltage of the micro fuel cell power system after connection to the specified const
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.